The ubiquitous marine radiocarbon reservoir effect (MRE) constrains the construction of reliable chronologies for marine sediments and the further comparison of paleoclimate records. Different reference values were suggested from various archives. However, it remains unclear how climate and MREs interact. Here we studied two pre-bomb corals from the Hainan Island and Xisha Island in the northern South China Sea (SCS), to examine the relationship between MRE and regional climate change. We find that the MRE from east of Hainan Island is mainly modulated by the Southern Asian Summer Monsoon-induced precipitation (with 11.4% contributed to seawater), rather than wind induced upwelling. In contrast, in the relatively open seawater of Xisha Island, the MRE is dominated by the East Asian Winter Monsoon, with relatively more negative (lower) ΔR values associated with high wind speeds, implying horizontal transport of seawater. The average SCS ΔR value relative to the Marine20 curve is –161±39 14C years. Our finding highlights the essential role of monsoon in regulating the MRE in the northern SCS, in particularly the tight bond between east Asian winter monsoon and regional MRE.

Many real-world intertemporal decisions involve a group of two or more individuals making consensual decisions through group collaboration. Here, we ask how group collaboration affects intertemporal choices. In two experiments, participants completed intertemporal choices individually first (the precollaboration phase). Then, participants were placed into groups of two or three and completed a similar intertemporal task, with the group arriving at a consensual decision on each trial (the group collaboration phase). Finally, participants once again completed the intertemporal choices individually (the postcollaboration phase). Results showed that after group collaboration, the delay discounting significantly decreased compared to before collaboration both at group level and at individual level. The effect of group collaboration on individual intertemporal choices was no longer discernible by 1 week later. Therefore, the current research demonstrates the effectiveness of group collaboration and provides a way to nudge both groups and individuals to make farsighted choices.

In this paper, an all-fiberized and narrow-linewidth 5 kW power-level fiber amplifier is presented. The laser is achieved based on the master oscillator power amplification configuration, in which the phase-modulated single-frequency laser is applied as the seed laser and a bidirectional pumping configuration is applied in the power amplifier. The stimulated Brillouin scattering, stimulated Raman scattering, and transverse mode instability effects are all effectively suppressed in the experiment. Consequently, the output power is scaled up to 4.92 kW with a slope efficiency of as high as approximately 80%. The 3-dB spectral width is about 0.59 nm, and the beam quality is measured to be M2∼1.22 at maximum output power. Furthermore, we have also conducted a detailed spectral analysis on the spectral width of the signal laser, which reveals that the spectral wing broadening phenomenon could lead to the obvious decrease of the spectral purity at certain output power. Overall, this work could provide a reference for obtaining and optimizing high-power narrow-linewidth fiber lasers.

To advance the utilization of solar thermal energy, a novel solar-driven microcapsule was designed by the combination of high-performance CuS nanoconverter and the microencapsulated n-Eicosane with a brookite TiO2 shell via in situ sol–gel method. The resultant n-Eicosane@TiO2/CuS microcapsules possessed excellent thermal properties with high latent heat density (171.7 J/g), high encapsulation efficiency (71.7%), and increased thermal conductivity (0.730 W/(m K)). SEM analysis clearly verified that CuS nanoparticles exhibited a uniform distribution on the surfaces. Most of all, the addition of CuS not only enlarged the absorption spectra from the UV to the visible and NIR region but also achieved high solar-to-thermal conversion efficiency (94.41%). Due to the high heat storage capability and solar irradiation utilization efficiency, this solar-driven microcapsule possesses great potential for the solar energy utilization.

High-power orbital angular momentum (OAM) beams have distinct advantages in improving capacity and data receiving for free-space optical communication systems at long distances. Utilizing the coherent combination of a beam array technique and helical phase approximation by a piston phase array, we have proposed a generating system for a novel high-power beam carrying OAM, which could overcome the power limitations of a common vortex phase modulator and a single beam. The characteristics of this generating method and the orthogonality of the generated OAM beams with different eigenstates have been theoretically analyzed and verified. Also a high-power OAM beam produced by coherent beam combination (CBC) of a six-element hexagonal fiber amplifier array has been experimentally implemented. Results show that the CBC technique utilized to control the piston phase differences among the array beams has a high efficiency of 96.3%. On the premise of CBC, we have obtained novel vortex beams carrying OAM of $\pm 1$ by applying an additional piston phase array modulation on the corresponding beam array. The experimental results agree approximately with the theoretical analysis. This work could be beneficial to areas that need high-power OAM beams, such as ultra-long distance free-space optical communications, biomedical treatments, and powerful trapping and manipulation under deep potential wells.

High-peak-power transform-limited narrow-linewidth nanosecond all-fiber lasers are desired in a range of applications. However, their linewidths will be broadened by self-phase modulation (SPM). We propose a novel concept that generates transform-limited laser pulses by temporally shaping the pulse seed. The impact of the pulse shape on SPM-induced spectral broadening was studied numerically and experimentally. It was found theoretically that the square-shape pulsed laser is immune to SPM-induced spectral broadening. Based on this principle, we built a high-peak-power, linearly polarized, square-shape nanosecond all-fiber laser in a master oscillator power amplifier (MOPA) configuration. Stimulated Brillouin scattering (SBS) limited peak powers of 4.02 kW, 5.06 kW, 6.52 kW and 9.30 kW were obtained at pulse widths of 8 ns, 7 ns, 6 ns and 5 ns. Thanks to the square-shape pulsed seed, the linewidths at maximum peak power remained at 129.5 MHz, 137.6 MHz, 156.2 MHz and 200.1 MHz, respectively, close to the transform-limited values of 110.8 MHz, 126.6 MHz, 147.7 MHz and 177.3 MHz.

The timing of the Holocene summer monsoon maximum (HSMM) in northeastern China has been much debated and more quantitative precipitation records are needed to resolve the issue. In the present study, Holocene precipitation and temperature changes were quantitatively reconstructed from a pollen record from the sediments of Tianchi Crater Lake in northeastern China using a plant functional type-modern analogue technique (PFT-MAT). The reconstructed precipitation record indicates a gradual increase during the early to mid-Holocene and a HSMM at ~5500–3100 cal yr BP, while the temperature record exhibits a divergent pattern with a marked rise in the early Holocene and a decline thereafter. The trend of reconstructed precipitation is consistent with that from other pollen records in northeastern China, confirming the relatively late occurrence of the HSMM in the region. However, differences in the onset of the HSMM within northeastern China are also evident. No single factor appears to be responsible for the late occurrence of the HSMM in northeastern China, pointing to a potentially complex forcing mechanism of regional rainfall in the East Asian monsoon region. We suggest that further studies are needed to understand the spatiotemporal pattern of the HSMM in the region.

Stimulated Raman scattering (SRS) effect is considered to be one of the main obstacles for power scaling in general-type fiber lasers. Different from previous techniques that aim at suppressing SRS, nonlinear fiber amplifier (NFA), which manipulates and employs the SRS for power scaling in rare-earth-doped fiber, is under intensive research in recent years. In this paper, the authors will present an all-round study on this new kind of high-power fiber amplifier. A theoretical model is proposed based on the rate equation and amplified spontaneous emission (ASE), with random noise taken into account. By numerical solving of the theoretical model, the power scaling potential, heat analysis and advantages in suppressing the undesired backscattering light are quantificationally analyzed for the first time. Then two different types of high-power NFAs are demonstrated individually. Firstly, a laser diode pumped NFA has reached kilowatt output power, and the results agree well with theoretical predictions. Secondly, a tandem-pumped NFA is proposed for the first time and validated experimentally, in which 1.5 kW output power has been achieved. The authors also briefly discuss several new issues relating to the complex nonlinear dynamics that occur in high-power NFAs, which might be interesting topics for future endeavors.

Compared with traditional uniform fibers, tapered fiber has numerous unique advantages, such as larger mode area, higher pump absorption, suppression to nonlinear effects, and maintaining good beam quality. In this manuscript, we have constructed an all-fiberized fiber amplifier which is based on a piece of ytterbium-doped tapered double-clad fiber (T-DCF). The fiber amplifier is operated under continuous wave (CW) regime at 1080 nm wavelength. The $M^{2}$ factor of the amplifier at 1.39 kW output power is ${\sim}1.8$. The maximum output power of the system reached 1.47 kW, which, to the best of our knowledge, is the highest output power of long tapered fiber based fiber laser system. Our result successfully verifies the potential of power scalability and all-fiberized capability of long tapered fiber, and the performance of our system can be further enhanced by fiber design optimization.

Accelerator mass spectrometry (AMS) is the most sensitive method for measuring 129I in environmental samples available today, with a detection limit of about 10–15 for 129I/127I. A drawback of the technique is the time-consuming chemical separation required to prepare AMS targets from raw samples. This step significantly limits applications requiring rapid analyses and large numbers of samples, for example, in monitoring studies associated with nuclear accidents. This work introduces a direct method for 129I measurements by AMS that does not require chemical separation. In this approach, stable iodine (127I) is added to a matrix of niobium (Nb) powder and mixed with dried raw sample. This mixture is pressed directly into a sputter target for AMS analysis. Two types of environmental samples have been tested in this work, seaweed and sediment. No anomalous behavior was noted in the Cs+ sputtering behavior of the targets prepared from these materials. The 129I/127I ratios and 129I concentrations measured by this rapid method were found to be in agreement with reported values that used a conventional AMS method for the same material. Based on our findings, we expect that such rapid measurements can be applied to a wide variety of materials, in addition to seaweed and sediment, as long as the sputtering-induced adverse effects do not prevent the stable operation of the ion source. The method is especially useful for screening large numbers of samples before more precise analyses are made.

Schistosoma japonicum, a human blood fluke, causes a parasitic disease affecting millions of people in Asia. Thioredoxin–glutathione system of S. japonicum plays a critical role in maintaining the redox balance in parasite, which is a potential target for development of novel antischistosomal agents. Here we cloned the gene of S. japonicum thioredoxin (SjTrx), expressed and purified the recombinant SjTrx in Escherichia coli. Functional assay shows that SjTrx catalyses the dithiothreitol (DTT) reduction of insulin disulphide bonds. The coupling assay of SjTrx with its endogenous reductase, thioredoxin glutathione reductase from S. japonicum (SjTGR), supports its biological function to maintain the redox homeostasis in the cell. Furthermore, the crystal structure of SjTrx in the oxidized state was determined at 2·0 Å resolution, revealing a typical architecture of thioredoxin fold. The structural information of SjTrx provides us important clues for understanding the maintenance function of redox homeostasis in S. japonicum and pathogenesis of this chronic disease.

A high power narrow-linewidth nanosecond all-fiber laser based on the master oscillator power amplifier (MOPA) configuration is demonstrated. A pulsed seed with high repetition rate of 10 MHz was generated by modulating a continuous-wave (CW) single-frequency fiber laser at $\sim $1064 nm by using an electro-optic intensity modulator (EOIM). After multi-stage cascaded power amplification, the average power was boosted to be kilowatt level. The pulses from the main amplifier had a pulse width of $\sim $3 ns and an average/peak power of 913 W/28.6 kW. Further power scaling of the pulses was limited by stimulated Raman scattering (SRS) for the moment, method for SRS suppression and further power scaling was briefly discussed.

We demonstrate a monolithic single frequency Tm-doped fiber amplifier with output power of 51.5 W. A single frequency fiber laser at 1.97 $\mathrm {\mu} $m is amplified by a cascaded master oscillator power amplifier (MOPA) system with all-fiber configuration. The optical-to-optical conversion efficiency of the main fiber amplifier is 45%. No amplified spontaneous emission (ASE) or stimulated Brillouin scattering (SBS) effect is observed in the fiber amplifier. The output power could be further scaled by launching more pump power.

We investigate the influence of the initial size of the proton layer on proton acceleration in the interaction of high intensity laser pulses with double-layer targets by using two-dimensional particle-in-cell code. We discuss the influence of proton layer initial sizes on the cut-off energy, energy spread, and divergence angle of proton beam. It is found that Coulomb explosion plays an important role on the proton cut-off energy. This causes the cut-off energy to increase for increasing proton layer thickness, at the expense of energy spread. The proton divergence angle reaches a peak value and then falls again with increasing the width. Proton divergence angle grows with target thickness. It is found that there is an optimal thickness to obtain the narrowest energy spread, which may provide an effective method (change the size of proton layer) to obtain high quality proton beams. This work may serve to improve the understanding of sheath field proton acceleration.

High-order interpolation algorithms for charge conservation in Particle-in-Cell (PIC) simulations are presented. The methods are valid for the case that a particle trajectory is a zigzag line. The second-order and third-order algorithms which can be applied to any even-order and odd-order are discussed in this paper, respectively. Several test simulations are performed to demonstrate their validity in two-dimensional PIC code. Compared with the simulation results of one-order, high-order algorithms have advantages in computation precision and enlarging the grid scales which reduces the CPU time.

In order to improve the total laser-proton energy conversion efficiency, a nanobrush target is proposed for proton acceleration and investigated by two-dimensional particle-in-cell simulation. The simulation results show that the nanobrush target significantly enhances the energy and number of hot electrons through the target rear side. Compared with plain target, the sheath field on the rear surface is increased near 100% and the total laser-proton energy conversion efficiency is prompted more than 70%. Furthermore, the proton divergence angle is less than 30° by using nanobrush target. The proposed target may serve as a new method to increase the energy conversion efficiency from laser to protons.