A simplified configuration was developed to facilitate the mode transition process within an over-under Turbine-Based Combined Cycle (TBCC) inlet. Leveraging dynamic mesh technology, an unsteady numerical simulation of the mode transition was conducted, emphasising the flow characteristics of the mode transition and the impact of key similarity criteria numbers. The findings indicate that at an incoming Mach number of 2.0, the mode transition is paired with a continuous alteration in the capture mass flow of the high-speed duct. This continual change instigates the inlet unstarting, with subsequent flow characteristics being contingent on the historical effect, exhibiting a degree of hysteresis characteristics. When the scale effect is considered, it is observed that a larger model scale results in higher Reynolds (Re) and Strouhal (St) numbers. This directly contributes to a notable delay in the unstart moment, a decrease in the unstart interval, and an enlargement of the hysteresis loop. An examination of control variables reveals that the Re number marginally influences mode transition characteristics, while the St number’s effect constitutes approximately 90% of the scale effect. This conclusively demonstrates that the St number is the predominant similarity criterion number in the mode transition process.

Diets low in vegetables are a main contributor to the health burden experienced by Australians living in rural communities. Given the ubiquity of smartphones and access to the Internet, digital interventions may offer an accessible delivery model for a dietary intervention in rural communities. However, no digital interventions to address low vegetable intake have been co-designed with adults living in rural areas(1). This research aims to describe the co-design of a digital intervention to improve vegetable intake with rural community members and research partners. Active participants in the co-design process were adults ≥18 years living in three rural Australian communities (total n = 57) and research partners (n = 4) representing three local rural governments and one peak non-government health organisation. An iterative co-design process(2) was undertaken to understand the needs (pre-design phase) and ideas (generative phase) of the target population through eight online workshops and a 21-item online community survey between July and December 2021. Prioritisation methods were used to help workshop participants identify the ‘Must-have, Should-have, Could-have, and Won’t-have or will not have right now’ (MoSCoW) features and functions of the digital intervention. Workshops were transcribed and inductively analysed using NVivo. Convergent and divergent themes were identified between the workshops and community survey to identify how to implement the digital intervention in the community. Consensus was reached on a concept for a digital intervention that addressed individual and food environment barriers to vegetable intake, specific to rural communities. Implementation recommendations centred on i) food literacy approaches to improve skills via access to vegetable-rich recipes and healthy eating resources, ii) access to personalisation options and behaviour change support, and iii) improving the community food environment by providing information on and access to local food initiatives. Rural-dwelling adults expressed preferences for personalised intervention features that can enhance food literacy and engagement with community food environments. This co-design process will inform the development of a prototype (evaluation phase) and feasibility testing (post-design phase) of this intervention. The resulting intervention is anticipated to reduce barriers and support enablers, across individual and community levels, to facilitate higher consumption of vegetables among rural Australians. These outcomes have the potential to contribute to improved wellbeing in the short term and reduced chronic disease risk in the long term, decreasing public health inequities.

This paper proposes a fixed-time anti-saturation (FT-AS) control scheme with a simple control loop for the 6-Degree-of-Freedom tracking (6-DOF) control problem of spacecraft with parameter uncertainties, external disturbances and input saturation. Considering the external disturbance and parameter uncertainties, the dynamical model of the tracking error is established. The traditional methods of handling input saturation usually add anti-saturation subsystems in the control system to suppress the impact of input overshoot. However, this paper directly inputs the input overshoot into the tracking error model, thus constructing a modified lumped disturbance term that includes the influence of input overshoot. Then, a novel fixed-time disturbance observer (FT-DO) is designed to estimate and compensate for this modified lumped disturbance. Therefore, there is no need to add the anti-saturation structures in the control loop, significantly reducing the complexity of the system. Finally, an observer-based fixed-time non-singular terminal sliding mode (FT-NTSM) controller is designed to guarantee the fixed-time stability of the whole system. In this way, the convergence time of the proposed scheme does not depend on the system’s initial conditions. Simulation results illustrate that the proposed method keeps the control input within the limit while achieving high-precision tracking control of attitude and position.

The chemistry of Al transformation has been well documented, though little is known about the mechanisms of structural perturbation of Al precipitates by carbonates at a molecular level. The purpose of the present study was to investigate the structural perturbation of Al precipitates formed under the influence of carbonates. Initial carbonate/Al molar ratios (MRs) used were 0, 0.1, and 0.5 after aging for 32 days, then the samples were analyzed by X-ray absorption near edge structure spectroscopy (XANES), X-ray diffraction (XRD), Fourier-transform infrared absorption spectroscopy (FTIR), and chemical analysis. The XRD data were in accord with the FTIR results, which revealed that as the carbonate/Al MR was increased from 0 to 0.1, carbonate preferentially retarded the formation of gibbsite and had relatively little effect on the formation of bayerite. As the carbonate/Al MR was increased to 0.5, however, the crystallization of both gibbsite and bayerite was completely inhibited. The impact of carbonate on the nature of Al precipitates was also evident in the increase of adsorbed water and inorganic C contents with increasing carbonate/Al MR. The Al K- and L- edge XANES data provide the first evidence illustrating the change in the coordination number of Al from 6-fold to mixed 6- and 4-fold coordination in the structural network of short-range ordered (SRO) Al precipitates formed under the increasing perturbation of carbonate. The fluorescence yield spectra of the O K-edge show that the intensity of the peak at 534.5 eV assigned to σ* transitions of Al-O and O-H bonding decreased with increasing carbonate/Al MR. The XANES data, along with the evidence from XRD, FTIR, and chemical analysis showed clearly that carbonate caused the alteration of the coordination nature of the Al-O bonding through perturbation of the atomic bonding and structural configuration of Al hydroxides by complexation with Al in the SRO network of Al precipitates. The surface reactivity of an Al-O bond is related to its covalency and coordination geometry. The present findings were, therefore, of fundamental significance in understanding the low-temperature geochemistry of Al and its impacts on the transformation, transport, and fate of nutrients and pollutants in the ecosystem.

The formation of siderite and magnetite by Fe(III)-reducing bacteria may play an important role in C and Fe geochemistry in subsurface and ocean sediments. The objective of this study was to identify environmental factors that control the formation of siderite (FeCO3) and magnetite (Fe3O4) by Fe(III)-reducing bacteria. Psychrotolerant (<20°C), mesophilic (20–35°C) and thermophilic (>45°C) Fe(III)-reducing bacteria were used to examine the reduction of a poorly crystalline iron oxide, akaganeite (β-FeOOH), without a soluble electron shuttle, anthraquinone disulfuonate (AQDS), in the presence of N2, N2-CO2(80:20, V:V), H2 and H2-CO2 (80:20, V:V) headspace gases as well as in -buffered medium (30–210 mM) under a N2 atmosphere. Iron biomineralization was also examined under different growth conditions such as salinity, pH, incubation time, incubation temperature and electron donors. Magnetite formation was dominant under a N2 and a H2 atmosphere. Siderite formation was dominant under a H2-CO2 atmosphere. A mixture of magnetite and siderite was formed in the presence of a N2-CO2 headspace. Akaganeite was reduced and transformed to siderite and magnetite in a -buffered medium (>120 mM) with lactate as an electron donor in the presence of a N2 atmosphere. Biogeochemical and environmental factors controlling the phases of the secondary mineral suite include medium pH, salinity, electron donors, atmospheric composition and incubation time. These results indicate that microbial Fe(III) reduction may play an important role in Fe and C biogeochemistry as well as C sequestration in natural environments.

Competition among the two-plasmon decay (TPD) of backscattered light of stimulated Raman scattering (SRS), filamentation of the electron-plasma wave (EPW) and forward side SRS is investigated by two-dimensional particle-in-cell simulations. Our previous work [K. Q. Pan et al., Nucl. Fusion 58, 096035 (2018)] showed that in a plasma with the density near 1/10 of the critical density, the backscattered light would excite the TPD, which results in suppression of the backward SRS. However, this work further shows that when the laser intensity is so high ($>{10}^{16}$ W/cm2) that the backward SRS cannot be totally suppressed, filamentation of the EPW and forward side SRS will be excited. Then the TPD of the backscattered light only occurs in the early stage and is suppressed in the latter stage. Electron distribution functions further show that trapped-particle-modulation instability should be responsible for filamentation of the EPW. This research can promote the understanding of hot-electron generation and SRS saturation in inertial confinement fusion experiments.

The target backsheath field acceleration mechanism is one of the main mechanisms of laser-driven proton acceleration (LDPA) and strongly depends on the comprehensive performance of the ultrashort ultra-intense lasers used as the driving sources. The successful use of the SG-II Peta-watt (SG-II PW) laser facility for LDPA and its applications in radiographic diagnoses have been manifested by the good performance of the SG-II PW facility. Recently, the SG-II PW laser facility has undergone extensive maintenance and a comprehensive technical upgrade in terms of the seed source, laser contrast and terminal focus. LDPA experiments were performed using the maintained SG-II PW laser beam, and the highest cutoff energy of the proton beam was obviously increased. Accordingly, a double-film target structure was used, and the maximum cutoff energy of the proton beam was up to 70 MeV. These results demonstrate that the comprehensive performance of the SG-II PW laser facility was improved significantly.

Currently there is lack of knowledge on how new types of alternative fuels and their storage conditions change the droplet evaporation characteristics. Liquid fuel is commonly stored in wide varieties of containers, where fuel characteristics may change because of the exposure to the material of the container. This study evaluates the impact of different storage containers on droplet evaporation characteristics of different fuels. It was found that there is a distinct phase transition between high volatility to low volatility phase in each fuel stored in steel drums verses fuel that is stored in plastic drums. The type of fuel contaminated by polymer additive has a high impact on fuel droplet burn rates. Polymer additives also have an impact on nucleate boiling, sub-droplets and soot particles. The burning rate constant, K, of selected pure aromatics, various fuel mixtures and Jet A with different cetane numbers have been evaluated. Research has shown that in the low volatility combustion phase a trend reduction of lowest boiling point pure aromatic burning rate to the highest boiling point pure aromatic burning rate is obvious. Irregular change in droplet diameter between the high volatility phase and low volatility phase during the combustion of aromatics blend was observed. This work has also evaluated the relationship between burning rates and cetane numbers.

As a typical plasma-based optical element that can sustain ultra-high light intensity, plasma density gratings driven by intense laser pulses have been extensively studied for wide applications. Here, we show that the plasma density grating driven by two intersecting driver laser pulses is not only nonuniform in space but also varies over time. Consequently, the probe laser pulse that passes through such a dynamic plasma density grating will be depolarized, that is, its polarization becomes spatially and temporally variable. More importantly, the laser depolarization may spontaneously take place for crossed laser beams if their polarization angles are arranged properly. The laser depolarization by a dynamic plasma density grating may find application in mitigating parametric instabilities in laser-driven inertial confinement fusion.

The great demographic pressure brings tremendous volume of beef demand. The key to solve this problem is the growth and development of Chinese cattle. In order to find molecular markers conducive to the growth and development of Chinese cattle, sequencing was used to determine the position of copy number variations (CNVs), bioinformatics analysis was used to predict the function of ZNF146 gene, real-time fluorescent quantitative polymerase chain reaction (qPCR) was used for CNV genotyping and one-way analysis of variance was used for association analysis. The results showed that there exists CNV in Chr 18: 47225201-47229600 (5.0.1 version) of ZNF146 gene through the early sequencing results in the laboratory and predicted ZNF146 gene was expressed in liver, skeletal muscle and breast cells, and was amplified or overexpressed in pancreatic cancer, which promoted the development of tumour through bioinformatics. Therefore, it is predicted that ZNF146 gene affects the proliferation of muscle cells, and then affects the growth and development of cattle. Furthermore, CNV genotyping of ZNF146 gene was three types (deletion type, normal type and duplication type) by Real-time fluorescent quantitative PCR (qPCR). The association analysis results showed that ZNF146-CNV was significantly correlated with rump length of Qinchuan cattle, hucklebone width of Jiaxian red cattle and heart girth of Yunling cattle. From the above results, ZNF146-CNV had a significant effect on growth traits, which provided an important candidate molecular marker for growth and development of Chinese cattle.

We report the experimental results of the commissioning phase in the 10 PW laser beamline of the Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72 ± 9 J is directed to a focal spot of approximately 6 μm diameter (full width at half maximum) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 × 1021 W/cm2. The first laser-proton acceleration experiment is performed using plain copper and plastic targets. High-energy proton beams with maximum cut-off energy up to 62.5 MeV are achieved using copper foils at the optimum target thickness of 4 μm via target normal sheath acceleration. For plastic targets of tens of nanometers thick, the proton cut-off energy is approximately 20 MeV, showing ring-like or filamented density distributions. These experimental results reflect the capabilities of the SULF-10 PW beamline, for example, both ultrahigh intensity and relatively good beam contrast. Further optimization for these key parameters is underway, where peak laser intensities of 1022–1023 W/cm2 are anticipated to support various experiments on extreme field physics.

Frequent freezing injury greatly influences winter wheat production; thus, effective prevention and a command of agricultural production are vital. The freezing injury monitoring method integrated with ‘3S’ (geographic information systems (GIS), global positioning system (GPS) and remote sensing (RS)) technology has an unparalleled advantage. Using HuanJing (HJ)-1A/1B satellite images of a winter wheat field in Shanxi Province, China plus a field survey, crop types and winter wheat planting area were identified through repeated visual interpretations of image information and spatial analyses conducted in GIS. Six vegetation indices were extracted from processed HJ-1A/1B satellite images to determine whether the winter wheat suffered from freezing injury and its degree of severity and recovery, using change vector analysis (CVA), the freeze injury representative vegetation index and the combination of the two methods, respectively. Accuracy of the freezing damage classification results was verified by determining the impact of freezing damage on yield and quantitative analysis. The CVA and the change of normalized difference vegetation index (ΔNDVI) monitoring results were different so a comprehensive analysis of the combination of CVA and ΔNDVI was performed. The area with serious freezing injury covered 0.9% of the total study area, followed by the area of no freezing injury (3.5%), moderate freezing injury (10.2%) and light freezing injury (85.4%). Of the moderate and serious freezing injury areas, 0.2% did not recover; 1.2% of the no freezing injury and light freezing injury areas showed optimal recovery, 15.6% of the light freezing injury and moderate freezing injury areas showed poor recovery, and the remaining areas exhibited general recovery.

The long-distance stable transport of relativistic electron beams (REBs) in plasmas is studied by full three-dimensional particle-in-cell simulations. Theoretical analysis shows that the beam transport is mainly influenced by three transverse instabilities, where the excitation of self-modulation instability, and the suppression of the filamentation instability and the hosing instability are important to realize the beam stable transport. By modulating the transport parameters such as the electron density ratio, the relativistic Lorentz factor, the beam envelopes and the density profiles, the relativistic bunches having a smooth density profile and a length of several plasma wave periods can suppress the beam-plasma instabilities and propagate in plasmas for long distances with small energy losses. The results provide a reference for the research of long-distance and stable transport of REBs, and would be helpful for new particle beam diagnosis technology and space active experiments.

The epidemic of tuberculosis has posed a serious burden in Qinghai province, it is necessary to clarify the epidemiological characteristics and spatial-temporal distribution of TB for future prevention and control measures. We used descriptive epidemiological methods and spatial statistical analysis including spatial correlation and spatial-temporal analysis in this study. Furthermore, we applied an exponential smoothing model for TB epidemiological trend forecasting. Of 43 859 TB cases, the sex ratio was 1.27:1 (M:F), and the average annual TB registered incidence was 70.00/100 000 of 2009–2019. More cases were reported in March and April, and the worst TB stricken regions were the prefectures of Golog and Yushu. High TB registered incidences were seen in males, farmers and herdsmen, Tibetans, or elderly people. 7132 cases were intractable, which were recurrent, drug resistant, or co-infected with other infections. Three likely cases clusters with significant high risk were found by spatial-temporal scan on data of 2009–2019. The exponential smoothing winters' additive model was selected as the best-fitting model to forecast monthly TB cases in the future. This research indicated that TB in Qinghai is still a serious threaten to the local residents' health. Multi-departmental collaboration and funds special for TB treatments and control are still needed, and the exponential smoothing model is promising which could be applied for forecasting of TB epidemic trend in this high-altitude province.

We report on experimental observation of non-laminar proton acceleration modulated by a strong magnetic field in laser irradiating micrometer aluminum targets. The results illustrate the coexistence of ring-like and filamentation structures. We implement the knife edge method into the radiochromic film detector to map the accelerated beams, measuring a source size of 30–110 μm for protons of more than 5 MeV. The diagnosis reveals that the ring-like profile originates from low-energy protons far off the axis whereas the filamentation is from the near-axis high-energy protons, exhibiting non-laminar features. Particle-in-cell simulations reproduced the experimental results, showing that the short-term magnetic turbulence via Weibel instability and the long-term quasi-static annular magnetic field by the streaming electric current account for the measured beam profile. Our work provides direct mapping of laser-driven proton sources in the space-energy domain and reveals the non-laminar beam evolution at featured time scales.

Pneumatic launch systems for Unmanned Aerial Vehicles (UAVs), including mechanical and pneumatic systems, are complex and non-linear. They are subjected to system parameters during launch, which leads to difficulty in engineering research analysis. For example, the mismatch between the UAV parameters and the parameter design indices of the launch system as well as the unclear design indices of the launching speed and overload of UAVs have a great impact on launch safety. Considering this situation, some studies are presented in this paper. Taking the pneumatic launch system as a research object, a pneumatic launcher dynamic simulation model is built based on co-simulation considering the coupling characteristics of the mechanical structure and transmission system. Its accuracy was verified by laboratory test results. Based on this model, the paper shows the effects of the key parameters, including the mass of the UAV, cylinder volume, pressure and moment of inertia of the pulley block, on the performance of the dynamic characteristics of the launch process. Then, a method for matching the parameter characteristics between the UAV and launch system based on batch simulation is proposed. The set of matching parameter values of the UAV and launch system that satisfy the launch take-off safety criteria are calculated. Finally, the influence of the system parameters of the launch process on the launch performance was analysed in detail, and the design optimised. Meaningful conclusions were obtained. The analysis method and its results can provide a reference for engineering and theoretical research and development of pneumatic launch systems.

Manure is a primary source of methane (CH4) emissions into the atmosphere. A large proportion of CH4 from manure is emitted during storage, but this varies with storage methods. In this research, we tested whether covering a manure heap with plastic reduces CH4 emission during a short-term composting process. A static chamber method was used to detect the CH4 emission rate and the change of the physicochemical properties of cattle manure which was stored either uncovered (treatment UNCOVERED) or covered with plastic (treatment COVERED) for 30-day periods during the four seasons? The dry matter content of the COVERED treatment was significantly less than the UNCOVERED treatment (P < 0.01), and the C/N ratio of the COVERED treatment significantly greater than the UNCOVERED treatment (P > 0.05) under high temperature. In the UNCOVERED treatment, average daily methane (CH4) emissions were in the order summer > spring > autumn > winter. CH4 emissions were positively correlated with the temperature (R2 = 0.52, P < 0.01). Compared to the UNCOVERED treatment, the daily average CH4 emission rates from COVERED treatment manure were less in the first 19 days of spring, 13 days of summer, 10 days of autumn and 30 days of winter. In summary, covering the manure pile with plastic reduces the evaporation of water during storage; and in winter, long-term covering with plastic film reduces the CH4 emissions during the storage of manure.

Glutamine synthetase (GS) and glutamate synthase (GOGAT) play a central role in plant nitrogen (N) metabolism. In order to study the effect of powdery mildew (Blumeria graminis f. sp. tritici, Bgt) on N metabolism, field experiments were carried out to evaluate GS and GOGAT activity, GS expression and grain protein content (GPC) in susceptible (Xi'nong 979) and resistant (Zhengmai 103) wheat cultivars under three treatments. The three treatments were no inoculation (CK), inoculated once with Bgt (MP) and inoculated nine times with Bgt (HP). For Xi'nong 979, the activities of GS and GOGAT in grains as well as GS activity in flag leaves increased at 10–15 days after anthesis (DAA), and decreased significantly at 15 or 20–30 DAA in HP and MP. However, GS activity in grains decreased from 20 DAA, which was later than that of flag leaves (15 DAA). At the same time, GS expression in grains was up-regulated at early stage, with GS1 at 10 DAA and GS2 at 15 DAA, followed by a continuous down-regulation. This result indicated that GS and GOGAT activity as well as GS expression were inhibited by powdery mildew, indicating that N metabolism in grains was inhibited at 20–30 DAA. The current study also found out that the yield of the susceptible cultivar decreased significantly, while its GPC increased obviously in HP. It was shown that the increase of GPC was not due to the enhancement of N metabolism, but due to the passive increase caused by yield reduction.