Immunological castration can be an alternative to traditional surgical castration. The active immunization against GnRH or kisspeptin has a castrating effect. To date, the fusion protein vaccine of combination with GnRH and kisspeptin have not been studied. Thus, the present study will develop a GnRH6-kisspeptin vaccine by genetic engineering method and investigate its immunocastration effect in male rats. Twenty 20-day-old male rats were randomly divided into two groups: the control group (n=10) and the immunization group (n=10). The initial immunization took place at week 0 followed by three booster doses administered intervals. The control group received an equivalent dose of white oil adjuvant. Orbital blood samples were collected at various time points following the initial immunization, at 0, 2, 4, 6, 8, 10 and 12 weeks, respectively. The entire left testis was weighed and its volume measured at week 12. Samples from the right testis were obtained for histological analysis. Serum levels of GnRH and kisspeptin antibodies, as well as testosterone levels were determined using ELISA. The results showed that the serum levels of GnRH and kisspeptin antibody titres of the immunized rats were significantly higher compared to the control group (P<0.05). Additionally, the testosterone concentration was effectively reduced following the intensified immunization. The testes of the immunized group exhibited a reduction in size and a significant decrease in the number of spermatogonia in the testicular tissue compared to the control group (P<0.05). These data indicate that the recombinant GnRH6-kisspeptin protein effectively induced immunological castration in rats.

Western Zhou Dynasty (ca. 1046–771 BC) was established soon after conquering the Shang Dynasty (ca. 1600–1046 BC) and brought about the earliest enfeoffment system in Chinese history. Yan was one of the vassal states of the same clan as Zhou. According to historical records, the capital of Yan state was located near Yan mountain, which is now known as the Liulihe site in the Fangshan District, Beijing. This study carries out the high-precision dating of two newly discovered Western Zhou Dynasty noble tombs at the Liulihe site. The man in tomb M1902 participated in the groundbreaking ceremony of Yan’s capital according to inscriptions on the bronze vessel found in this tomb. Samples of different materials, especially different parts of human skeletons from the tombs, were selected to form a sample series in chronological order. Wiggle-matching models were established in OxCal program based on the growth and development time of different teeth and bones of human skeletons. More accurate ages were acquired for the death of the individuals. The results indicate that the most probable distribution range of the death date of the individual in M1902 is about 1045–1010 BC. The radiocarbon dates of M1902 give important chronological information about the founding of Yan state, and they are very close to those of the year in which King Wu of Zhou conquered the Shang Dynasty.

Suppressing mode degradation is the key issue for high-power laser delivery; however, diagnosing mode degradation in its entirety, ranging from the contents and origins to locations, has always been a major obstacle. Here, a versatile approach for tracing the origins of mode coupling is demonstrated through addressing the differential intermodal dispersions of fiber modes. Full recognition for modal contents and the origins of mode degradation are experimentally completed in a two-mode fiber laser delivery system, which assists a significant improvement of beam quality M2 from 1.35 to 1.15 at the highest power of over 300 W. This method yields a quantitative characterization for manipulating the individual mode of dual-mode coupling origins or their combinations. This work points toward a promising strategy for the online tracing of mode coupling in cascade fiber links, thus enabling further pursuit of seeking extreme beam quality in high-power fiber laser systems.

This paper systematically investigated the impact mechanisms of proton irradiation, atomic oxygen irradiation and space debris collision, both individually and in combination, on the laser damage threshold and damage evolution characteristics of HfO2/SiO2 triple-band high-reflection films and fused silica substrates using a simulated near-Earth space radiation experimental system. For the high-reflection film samples, the damage thresholds decreased by 15.38%, 13.12% and 46.80% after proton, atomic oxygen and simulated space debris (penetration) irradiation, respectively. The coupling irradiation of the first two factors resulted in a decrease of 26.93%, while the combined effect of all the three factors led to a reduction of 63.19%. Similarly, the fused silica substrates exhibited the same pattern of laser damage performance degradation. Notably, the study employed high-precision fixed-point in situ measurement techniques to track in detail the microstructural changes, surface roughness and optical-thermal absorption intensity before and after proton and atomic oxygen irradiation at the same location, thus providing a more accurate and comprehensive analysis of the damage mechanisms. In addition, simulations were conducted to quantitatively analyze the transmission trajectories and concentration distribution lines of protons and atomic oxygen incident at specific angles into the target material. The research findings contribute to elucidating the laser damage performance degradation mechanism of transmissive elements in near-Earth space environments and provide technical support for the development of high-damage-threshold optical components resistant to space radiation.

To meet the demands of laser-ion acceleration at a high repetition rate, we have developed a comprehensive diagnostic system for real-time and in situ monitoring of liquid sheet targets (LSTs). The spatially resolved rapid characterizations of an LST’s thickness, flatness, tilt angle and position are fulfilled by different subsystems with high accuracy. With the help of the diagnostic system, we reveal the dependence of thickness distribution on collision parameters and report the 238-nm liquid sheet generated by the collision of two liquid jets. Control methods for the flatness and tilt angle of LSTs have also been provided, which are essential for applications of laser-driven ion acceleration and others.

The collector for separating diasporic bauxite serves as a type of flotation reagent by adsorbing selectively on diaspore to make it hydrophobic enough to separate it from the aluminosilicates. Although the flotation process is considered economical in the desilication of Chinese diasporic bauxite, the existing collectors fail to separate these ores because of their poor adsorption selectivity over other minerals. The present study was an attempt to seek a collector for selective flotation of diaspore over aluminosilicates. A novel carboxyl hydroxamic acid compound, 2,2-bis(hydroxycarbamoyl) decanoic acid (BHDA), was designed and synthesized, and the flotation behavior of diaspore, kaolinite, and illite was investigated by flotation tests with BHDA. The interactions between the BHDA and the minerals were also explored by Fourier-transform infrared spectroscopy (FTIR), zeta-potential measurement, and density functional theory (DFT) calculation. Using BHDA as the collector, the pulp pH value affected the floatability of diaspore significantly while the floatability of kaolinite or illite was unaffected or only slightly affected. The dosage of BHDA had little effect on the floatability of the three minerals. The greatest difference in floatability between diaspore and aluminosilicates occurred at mid-range pulp pH (7). Large shifts in characteristic absorption peaks and new absorption peaks were observed for BHDA-treated diaspore but were absent from BHDA-treated aluminosilicates. The change in the negative zeta potential of diaspore was also greater than those of aluminosilicates in the presence of BHDA. The O atoms in the carboxyl and hydroxycarbamoyl of BHDA have highly negative charges, and favorable stereo conditions existed to form five- or six-membered rings, resulting in their coordination with the Al atoms of diaspore, leading to chemisorption in chelate rings; the adsorption of BHDA on kaolinite or illite, on the other hand, was mainly physical in nature. The BHDA was, therefore, highly selective in the flotation between diaspore and aluminosilicates and possibly suitable for the separation of diasporic bauxite.

Here, we report the generation of MeV alpha-particles from H-11B fusion initiated by laser-accelerated boron ions. Boron ions with maximum energy of 6 MeV and fluence of 109/MeV/sr@5 MeV were generated from 60 nm-thick self-supporting boron nanofoils irradiated by 1 J femtosecond pulses at an intensity of 1019 W/cm2. By bombarding secondary hydrogenous targets with the boron ions, 3 × 105/sr alpha-particles from H-11B fusion were registered, which is consistent with the theoretical yield calculated from the measured boron energy spectra. Our results demonstrated an alternative way toward ultrashort MeV alpha-particle sources employing compact femtosecond lasers. The ion acceleration and product measurement scheme are referential for the studies on the ion stopping power and cross section of the H-11B reaction in solid or plasma.

The production and industrial use of asbestos cement and other asbestos-containing materials have been restricted in most countries because of the potential detrimental effects on human health and the environment. Chrysotile is the most common form of asbestos and investigations into how to recycle this serpentine phyllosilicate mineral have attracted extensive attention. Chrysotile asbestos tailings can be transformed thermally, at high temperature, by in situ carbothermal reduction (CR). The CR method aims to maximize use of the chrysotile available and uses high temperatures and carbon to change the mineral form and structure of the chrysotile asbestos tailings. When chrysotile asbestos is employed as the raw material and coke (carbon) powder is used as the reducing agent for CR transformation, stable, high-temperature composites consisting of forsterite, stishovite, and silicon carbide are formed. Forsterite (Mg2SiO4) was the most abundant crystalline phase formed in samples heat treated below 1500ºC. At 1600ºC, forsterite was exhausted through decomposition and β-SiC formed by reduction of stishovite. A larger proportion of β-SiC was generated as the carbon content was increased. This research revealed that both temperature and carbon addition play key roles in the transformation of chrysotile asbestos tailings.

Mineral-microbe interactions are widespread in a number of environmental processes such as mineral weathering, decomposition, and transformation. Both clay minerals and silicate-weathering bacteria are widely distributed in nature, and the latter contribute to weathering, diagenesis, and mineralization of major rock-forming minerals. The purpose of this study was to observe changes in the chemical composition and structure, especially the phase transformation, of smectite after processing by a silicate-weathering bacterium. The interaction between Bacillus mucilaginosus and bentonite was studied using custom culture media. Results from Inductively Coupled Plasma-Atomic Emission Spectrometry revealed that the bacterium promoted release of Si and Al from solid bentonite to solution. Concomitantly, the Ka nd Fe contents of the mineral increased as shown by X-ray photoelectron spectroscopy results. After interaction with the bacterium, the montmorillonite underwent a possible structure transformation to smectite, as indicated by the emergence of a new weak peak (d = 9.08 Å) shown by X-ray diffraction patterns. The mineralogical changes were also demonstrated by the decrease in the specific surface area of the mineral from 33.0 to 24.0 m2/g (these lower values for SSA of bentonite are related to the particle size of the smectite examined (120-160 mesh) and the weakened absorption bands in Al-O-H and Si-O-Si vibrations by Micro Fourier-transform infrared spectroscopy. The morphology changes in the bacteria observed by environmental scanning electron microscopy and atomic force microscopy revealed an obvious growth of the flagella in the presence of bentonite.

The present study aimed at examining the perceptual span, the visual field area for information extraction within a single fixation, during the reading of traditional Chinese sentences. Native traditional Chinese readers’ eye-movements were recorded as they read sentences that were presented using a gaze-contingent technique, in which legible text was restricted within a window that moved in synchrony with the eyes, while characters outside the window were masked. Comparisons of the window conditions with a baseline condition in which no viewing constraint was applied showed that when the window revealed one previous character and three upcoming characters around the current fixation, reading speed and oculomotor activities reached peak performance. Compared to previous results with simplified Chinese reading, based on a similar set of materials, traditional Chinese exhibits a reduction of the perceptual span. We suggest that the visual complexity of a writing system likely influences the perceptual span during reading.

Post-acceleration of protons in helical coil targets driven by intense, ultrashort laser pulses can enhance ion energy by utilizing the transient current from the targets’ self-discharge. The acceleration length of protons can exceed a few millimeters, and the acceleration gradient is of the order of GeV/m. How to ensure the synchronization between the accelerating electric field and the protons is a crucial problem for efficient post-acceleration. In this paper, we study how the electric field mismatch induced by current dispersion affects the synchronous acceleration of protons. We propose a scheme using a two-stage helical coil to control the current dispersion. With optimized parameters, the energy gain of protons is increased by four times. Proton energy is expected to reach 45 MeV using a hundreds-of-terawatts laser, or more than 100 MeV using a petawatt laser, by controlling the current dispersion.

Previous research has provided evidence for cross-language phonological activation during visual word recognition. However, such findings mainly came from alphabetic languages, and readers’ familiarity with the two scripts might differ. The present study aimed to test whether such cross-language phonological activation can be observed in Chinese, a logographic script, without the confounding factor of script familiarity as readers read the same script in different languages. Cantonese–Mandarin bilinguals were tested in an eye-tracking experiment in which they were instructed to read sentences silently. A target word in the sentence was replaced by either a homophone in both Cantonese and Mandarin, a homophone in Cantonese or in Mandarin only, or an unrelated character. The results showed that native Cantonese readers could activate phonological representations of L1 and L2 while reading Chinese sentences silently. However, the degree to which they relied on phonological decoding in L1 and L2 varied in the two languages.

A new approach to target development for laboratory astrophysics experiments at high-power laser facilities is presented. With the dawn of high-power lasers, laboratory astrophysics has emerged as a field, bringing insight into physical processes in astrophysical objects, such as the formation of stars. An important factor for success in these experiments is targetry. To date, targets have mainly relied on expensive and challenging microfabrication methods. The design presented incorporates replaceable machined parts that assemble into a structure that defines the experimental geometry. This can make targets cheaper and faster to manufacture, while maintaining robustness and reproducibility. The platform is intended for experiments on plasma flows, but it is flexible and may be adapted to the constraints of other experimental setups. Examples of targets used in experimental campaigns are shown, including a design for insertion in a high magnetic field coil. Experimental results are included, demonstrating the performance of the targets.

Hydrothermal alteration records fluid–rock interactions and can therefore be used to constrain element migrations during mineralization. Although hydrothermal alteration is widely developed in hydrothermal vein-type uranium deposits in South China, consideration of elemental mass changes during alteration has not been examined. The Egongtang uranium deposit in the central Nanling Range is mainly hosted by the Qingzhangshan granite in South China, and was strongly altered by K-feldspar, quartz, chlorite, illite, haematite, pyrite and carbonates. The alteration section can be divided into five horizontal zones: fresh granite (Zone V), a distal alkaline alteration zone (Zone IV), a chlorite-rich zone (Zone III), a close-to-ore sericite/illite alteration zone (Zone II) and a central mineralization zone with strong haematitization (Zone I). Whole-rock geochemistry of the altered samples indicates that from Zone IV to Zone I, the content of SiO2 and U increases significantly. The mass gains of SiO2, MgO and Fe2O3 were proportional to the concentration of U. The content of trace elements (such as Ba, K, La, Ce, Pr, Sr, P, Eu, etc.) gradually decreases from Zone V to Zone I. The rare earth elements manifest a decrease in light rare earth elements and a slight increase in heavy rare earth elements accordingly from Zone V to Zone I. This study shows that the ore materials of the Egongtang deposit were mainly derived from the Qingzhangshan granites. In the early alkali alterations, large amounts of U were partitioned into the fluids. In the ore-forming stage, ores precipitated accompanied by acid metasomatism such as chloritization, haematitization and carbonation.

In this work, a confined-doped fiber with the core/inner-cladding diameter of 40/250 μm and a relative doping ratio of 0.75 is fabricated through a modified chemical vapor deposition method combined with the chelate gas deposition technique, and subsequently applied in a tandem-pumped fiber amplifier for high-power operation and transverse mode instability (TMI) mitigation. Notably, the impacts of the seed laser power and mode purity are preliminarily investigated through comparative experiments. It is found that the TMI threshold could be significantly affected by the seed laser mode purity. The possible mechanism behind this phenomenon is proposed and revealed through comprehensive comparative experiments and theoretical analysis. Finally, a maximum output power of 7.49 kW is obtained with the beam quality factor of approximately 1.83, which is the highest output power ever reported in a forward tandem-pumped confined-doped fiber amplifier. This work could provide a good reference and practical solution to improve the TMI threshold and realize high-power high-brightness fiber lasers.