Turbulent flow widely exists in the aerospace field, and it is still challenging to realise the accurate prediction in the numerical simulation. To realise the high-fidelity numerical simulation of compressible turbulent flow, a high-order accurate self-adaptive turbulence eddy simulation (SATES) method is developed on the PHengLEI-HyOrder open-source solver, combining with the high-order accurate weighted compact nonlinear schemes (WCNS). The compressible flow in the subsonic and transonic is numerically simulated, including some typical cases, such as subsonic flow past a circular cylinder and flow past a square cylinder, high-lift configuration DLR-F11, transonic flow around a circular cylinder. The results predicted by the current high-order accurate SATES are in good agreement with the available experimental and numerical data. The present numerical method can also accurately capture the interactions between shock waves and turbulence while accurately simulating flow separation, shear layer instability and large-scale vortex shedding. The results obtained show that the current high-order accurate SATES simulations based on PHengLEI-HyOrder solver can accurately simulate complex turbulent flows with high reliability.

Loess, a geologic record of dust, is an optimal archive for exploring paleoclimate and the paleo-dust path from source to sink. The dust path for the Songnen Plain, NE China, during the last glacial period has not been established. To address this, 63 surface sediment samples from the Northeast China Sandy Lands, i.e., Onqin Daga Sandy Land (OD), Horqin Sandy Land (HQ), Hulun Buir Sandy Land (HL), and Songnen Sandy Land (SN), and six samples from the last glacial loess in the Harbin area were collected for elemental geochemical analysis of the <10 μm fraction to quantitatively reconstruct the dust pathway using a frequentist model. The results show that these sandy lands have a distinct geochemical composition due to a control from markedly different provenances. The quantitative results indicate that the dust contribution of the southwestern SN to the Harbin loess is as high as 50.4–77.2%, followed by the OD and HQ (3.3–34.8%), the northwestern SN (0–36.8%), and the HL (0–8%). Notably, the dust contribution to the Harbin loess began to change considerably after ~46–41 ka BP, with a significant increase from 1.1% to 41.2% from the northwestern direction. Some ecological safety strategies are proposed to address dust pollution in the Harbin area.

An advanced deformable Kirkpatrick–Baez (K-B) mirror system was developed, equipped with high-speed piezoelectric actuators, and designed to induce beam decoherence and significantly enhance the quality of X-ray imaging by minimizing undesirable speckles in synchrotron radiation or free-electron laser facilities. Each individual mirror is engineered with 36 independent piezoelectric actuators that operate in a randomized manner, orchestrating the mirror surface to oscillate at a high frequency up to 100 kHz. Through in situ imaging single-slit diffraction measurement, it has been demonstrated that this high-frequency-vibration mirror system is pivotal in disrupting the coherent nature, thereby diminishing speckle formation. The impact of the K-B mirror system is profound, with the capability to reduce the image contrast to as low as 0.04, signifying a substantial reduction in speckle visibility. Moreover, the coherence of the X-ray beam is significantly lowered from an initial value exceeding 80% to 13%.

Artificial sweeteners are generally used and recommended to alternate added sugar for health promotion. However, the health effects of artificial sweeteners remain unclear. In this study, we included 6371 participants from the National Health and Nutrition Examination Survey with artificial sweetener intake records. Logistic regression and Cox regression were applied to explore the associations between artificial sweeteners and risks of cardiometabolic disorders and mortality. Mendelian randomisation was performed to verify the causal associations. We observed that participants with higher consumption of artificial sweeteners were more likely to be female and older and have above medium socio-economic status. After multivariable adjustment, frequent consumers presented the OR (95 % CI) for hypertension (1·52 (1·29, 1·80)), hypercholesterolaemia (1·28 (1·10, 1·50)), diabetes (3·74 (3·06, 4·57)), obesity (1·52 (1·29, 1·80)), congestive heart failure (1·89 (1·35, 2·62)) and heart attack (1·51 (1·10, 2·04)). Mendelian randomisation confirmed the increased risks of hypertension and type 2 diabetes. Moreover, an increased risk of diabetic mortality was identified in participants who had artificial sweeteners ≥ 1 daily (HR = 2·62 (1·46, 4·69), P = 0·001). Higher consumption of artificial sweeteners is associated with increased risks of cardiometabolic disorders and diabetic mortality. These results suggest that using artificial sweeteners as sugar substitutes may not be beneficial.

The sustainability of high-level radioactive waste repositories situated in fractured crystalline rocks depends on the stability of bentonite liners, and this can pose a problem in certain groundwater conditions that favor the formation of colloids from backfill materials that are prone to erosion. The influence of different environments on the structure of Gaomiaozi bentonite (GMZ) and GMZ colloids (GMZC) is presented here. Different hydrated interlayer structures of bulk and colloidal forms of this bentonite from small-angle X-ray scattering (SAXS) data are demonstrated. Analysis of the scattering data showed that GMZ had three interlayer water structures: dehydrated (0W), monohydrated (1W), and bi-hydrated (2W). The colloids readily agglomerated at acidic pH (pH <5) but showed resistance to agglomeration in an alkaline condition (pH >7). The effect of Na+, K+, Mg2+, and Ca2+ on the lamellar structure and agglomerate morphology of GMZC particles was investigated. In general, the tendency of colloids to agglomerate was greater in the presence of divalent metal cations compared with monovalent metal cations. High concentrations (10–5 to 10–3 mol L–1) of divalent ions imparted order into the stacked lamellar structure after the saturation of the interlayer. In contrast, monovalent ions reduced the tendency of the particles to aggregate, leading to an abundance of colloidal nanoparticles prone to erosion. This work helps to better understand the structural characteristics of GMZC in the groundwater environment, and provides a valuable reference for the evaluation of nuclide migration in the deep geological disposal of high-level radioactive wastes.

Here, we report the generation of MeV alpha-particles from H-11B fusion initiated by laser-accelerated boron ions. Boron ions with maximum energy of 6 MeV and fluence of 109/MeV/sr@5 MeV were generated from 60 nm-thick self-supporting boron nanofoils irradiated by 1 J femtosecond pulses at an intensity of 1019 W/cm2. By bombarding secondary hydrogenous targets with the boron ions, 3 × 105/sr alpha-particles from H-11B fusion were registered, which is consistent with the theoretical yield calculated from the measured boron energy spectra. Our results demonstrated an alternative way toward ultrashort MeV alpha-particle sources employing compact femtosecond lasers. The ion acceleration and product measurement scheme are referential for the studies on the ion stopping power and cross section of the H-11B reaction in solid or plasma.

Effects of solid nanolayers embedded in a near-critical density plasma on the laser-driven collisionless shock acceleration are investigated by using two-dimensional particle-in-cell simulations. Due to the interaction of nanolayers and the incident laser, an additional number of hot electrons are generated and an inhomogeneous magnetic field is induced. As a result, the collisionless shock is reinforced within the nanolayer gaps compared to the target without the structured nanolayers. When the laser intensity is 9.8 × 1019 W/cm2, the amplitude of the electrostatic field is increased by 30% and the shock velocity is increased from 0.079c to 0.091c, leading to an enhancement of the peak energy and the cutoff energy of accelerated protons, from 6.9 MeV to 9.1 MeV and 12.2 MeV to 20.0 MeV, respectively. Furthermore, the effects of the width of the nanolayer gaps are studied, by adjusting the gap width of nanolayers, and optimal nanolayer setups for collisionless shock acceleration can be acquired.

Menaquinone-7 (MK-7), a multipotent vitamin K2, possesses a wide range of biological activities, a precise curative effect and excellent safety. A simple and rapid LC-APCI-MS/MS method for the determination of MK-7 in human plasma with single liquid–liquid extraction (LLE) extraction and 4·5-min analysis time has been developed and validated. Four per cent bovine serum albumin (BSA) was used as surrogate matrix for standard curves and endogenous baseline subtraction. This method was reproducible and reliable and was used to analyse of MK-7 in human plasma. The endogenous circadian rhythm and bioavailability of MK-7 were investigated in two randomised single-dose, open, one-way clinical trials (Study I and Study II). A total of five healthy male subjects were enrolled in Study I and 12 healthy male subjects in Study II. Single-dose (1 mg) of MK-7 was given to each subject under fasting condition, and all eligible subjects were given a restricting VK2 diet for 4 d prior to drug administration and during the trial. The experiment results of Study I demonstrated that endogenous MK-7 has no circadian rhythm in individuals. Both studies showed MK-7 are absorbed with peak plasma concentrations at about 6 h after intake and has a very long half-life time.

This paper presents a gait optimization method to generate the locomotion pattern for biped and discuss its stability. The main contribution of this paper is a newly proposed energy-based stability criterion, which permits the dynamic stable walking and could be straight-forwardly generalized to different locomotion scenarios and biped robots. The gait optimization problem is formulated subject to the constraints of the whole-body dynamics and kinematics. The constraints are established based on the modelling of bipedal hybrid dynamical systems. Following the whole-body modelling, the system energy is acquired and then applied to create the stability criterion. The optimization objective is also established on the system energy. The gait optimization is solved by being converted to a large-scale programming problem, where the transcription accuracy is improved via the spectral method. To further reduce the dimensionality of the large-scale problem, the whole-body dynamics is re-constructed. The generalization of the optimized gait is improved by the design of feedback control. The optimization examples demonstrate that the stability criterion naturally leads to a cyclic biped locomotion, though the periodicity was not previously imposed. Two simulation cases, level ground walking and slope walking, verify the generalization of the stability criterion and feedback control. The stability analyses are carried out by investigating the motions of centre of gravity and centre of pressure. It is revealed that if the tracked speed is above 0.3 m/s or the biped accelerates/climbs the slope, the stability criterion accomplishes the dynamic stable walking, where zero moment point criterion is not strictly complied.

A new approach to target development for laboratory astrophysics experiments at high-power laser facilities is presented. With the dawn of high-power lasers, laboratory astrophysics has emerged as a field, bringing insight into physical processes in astrophysical objects, such as the formation of stars. An important factor for success in these experiments is targetry. To date, targets have mainly relied on expensive and challenging microfabrication methods. The design presented incorporates replaceable machined parts that assemble into a structure that defines the experimental geometry. This can make targets cheaper and faster to manufacture, while maintaining robustness and reproducibility. The platform is intended for experiments on plasma flows, but it is flexible and may be adapted to the constraints of other experimental setups. Examples of targets used in experimental campaigns are shown, including a design for insertion in a high magnetic field coil. Experimental results are included, demonstrating the performance of the targets.

The aim of this study was to evaluate the association between prenatal and neonatal period exposures and the risk of childhood and adolescent nasopharyngeal carcinoma (NPC). From January 2009 to January 2016, a total of 46 patients with childhood and adolescent NPC (i.e., less than 18 years of age) who were treated at Sun Yat-sen University Cancer Center were screened as cases, and a total of 45 cancer-free patients who were treated at Sun Yat-sen University Zhongshan Ophthalmic Center were selected as controls. The association between maternal exposures during pregnancy and obstetric variables and the risk of childhood and adolescent NPC was evaluated using logistic regression analysis. Univariate analysis revealed that compared to children and adolescents without a family history of cancer, those with a family history of cancer had a significantly higher risk of childhood and adolescent NPC [odds ratios (OR) = 3.15, 95% confidence interval (CI) = 1.02–9.75, P = 0.046], and the maternal use of folic acid and/or multivitamins during pregnancy was associated with a reduced risk of childhood and adolescent NPC in the offspring (OR = 0.07, 95% CI = 0.02–0.25, P < 0.001). After multivariate analysis, only the maternal use of folic acid and/or multivitamins during pregnancy remained statistically significant. These findings suggest that maternal consumption of folic acid and/or multivitamins during pregnancy is associated with a decreased risk of childhood and adolescent NPC in the offspring.

In the present study, we analysed the effects of SNP rs174547 (T/C) in the fatty acid desaturase 1 (FADS1) gene on long-chain PUFA levels. Four databases were searched to retrieve related literature with keywords such as fatty acid (FA), SNP, FADS1 and rs174547. A meta-analysis of the data was performed using Stata12.0 software, including summary statistics, test for heterogeneity, evaluation of publication bias, subgroup analysis and sensitivity analysis. The associations between rs174547 in FADS1 and seven types of FA, and Δ-5 (D5D) and Δ-6 fatty acid desaturase (D6D) activity were assessed based on the pooled results from eleven papers. A total of 3713 individuals (1529 TT and 2184 TC + CC) were included. The results demonstrated that minor C allele carriers of rs174547 had higher linoleic acid (LA; P < 0·001) and α-linolenic acid (P = 0·020) levels, lower γ-linolenic acid (GLA; P = 0·001) and arachidonic acid (P = 0·024) levels, and lower D5D (P = 0·005) and D6D (P = 0·004) activities than the TT genotype group. Stratification analysis showed that minor C allele carriers of rs174547 had higher LA and lower GLA levels and lower D6D activities in plasma (LA, P < 0·001; GLA, P < 0·001; D6D activity, P < 0·001) samples and in Asian populations (LA, P < 0·001; GLA, P = 0·001; D6D activity, P = 0·001) than the TT genotype group. In conclusion, minor C allele carriers of the SNP rs174547 were associated with decreased activity of D5D and D6D.

Feathers play a critical role in thermoregulation and directly influence poultry production. Poor feathering adversely affects living appearance and carcass quality, thus reducing profits. However, producers tend to ignore the importance of feather development and do not know the laws of feather growth and development. The objective of this study was to fit growth curves to describe the growth and development of feathers in yellow-feathered broilers during the embryonic and posthatching periods using different nonlinear functions (Gompertz, logistic and Bertalanffy). Feather mass and length were determined during the embryonic development and posthatching stages to identify which growth model most accurately described the feather growth pattern. The results showed that chick embryos began to grow feathers at approximately embryonic (E) day 10, and the feathers grew rapidly from E13 to E17. There was little change from E17 to the day of hatching (DOH). During the embryonic period, the Gompertz function (Y = 798.48e−203 431exp(−0.87t), Akaike’s information criterion (AIC) = −0.950 × 103, Bayesian information criterion (BIC) = −0.711 × 103 and mean square error (MSE) = 559.308) provided the best fit for the feather growth curve compared with the other two functions. After hatching, feather mass and length changed little from the DOH to day (D) 14, increased rapidly from D21 to D91 and then grew slowly after D91. The first stage of feather molting occurred from 2 to 3 weeks of age when the down feathers were mostly shed and replaced with juvenile feathers, and the second stage occurred at approximately 13 to 15 weeks of age. The three nonlinear functions could overall fit the feather growth curve well, but the Bertalanffy model (Y = 116.88 × (1−0.86e−0.02t)3, AIC = 1.065 × 105, BIC = 1.077 × 105 and MSE = 11.308) showed the highest degree of fit among the models. Therefore, the Gompertz model exhibited the best goodness of fit for the feather growth curve during the embryonic development, while the Bertalanffy model was the most suitable model due to its accurate ability to predict the growth and development of feathers during the growth period, which is an important commercial characteristic of yellow-feathered chickens.