Rhopalosiphum padi is an important grain pest, causing severe losses during crop production. As a systemic insecticide, flonicamid can control piercing-sucking pests efficiently. In our study, the lethal effects of flonicamid on the biological traits of R. padi were investigated via a life table approach. Flonicamid is highly efficiently toxic to R. padi, with an LC50 of 9.068 mg L−1. The adult longevity and fecundity of the R. padi F0 generation were markedly reduced under the LC25 and LC50 concentrations of flonicamid exposure. In addition, negative transgenerational effects on R. padi were observed under exposure to lethal concentrations of flonicamid, with noticeable decreases in the reproductive period, adult longevity, total longevity, and total fecundity of the F1 generation under the LC25 concentration of flonicamid. Furthermore, the third nymph stage (N3), preadult stage, duration of the adult pre-reproductive period, duration of the total pre-reproductive period, reproductive period, adult longevity, total longevity, and total fecundity of the F1 generation were significantly lower under treatment with the LC50 concentration of flonicamid. The life table parameters were subsequently analysed, revealing that the intrinsic rate of increase (rm) and the net reproductive rate (R0) were significantly lower but that the finite rate of increase (λ) and the mean generation time (T) were not significantly different under the LC25 and LC50 concentrations of flonicamid. These data are beneficial for grain aphid control and are critical for exploring the role of flonicamid in the integrated management of this key pest.

We demonstrated a method to improve the output performance of a Ti:sapphire laser in the long-wavelength low-gain region with an efficient stimulated Raman scattering process. By shifting the wavelength of the high-gain-band Ti:sapphire laser to the long-wavelength low-gain region, high-performance Stokes operation was achieved in the original long-wavelength low-gain region of the Ti:sapphire laser. With the fundamental wavelength tuning from 870 to 930 nm, first-order Stokes output exceeding 2.5 W was obtained at 930–1000 nm, which was significantly higher than that directly generated by the Ti:sapphire laser, accompanied by better beam quality, shorter pulse duration and narrower linewidth. Under the pump power of 42.1 W, a maximum first-order Stokes power of 3.24 W was obtained at 960 nm, with a conversion efficiency of 7.7%. Furthermore, self-mode-locked modulations of first- and second-order Stokes generation were observed in Ti:sapphire intracavity solid Raman lasers for the first time.

The delay-shift of the pre-pulse may mislead the determination of its origination and cause problems for the temporal contrast improvement of high-peak-power lasers, especially when the corresponding post-pulse is beyond the time window of the measurement device. In this work, an empirical formula is proposed to predict the delay-shift of pre-pulses for the first time. The empirical formula shows that the delay-shift is proportional to the square of the post-pulse’s initial delay, and also the ratio of the third-order dispersion to the group delay dispersion’s square, which intuitively reveals the main cause for the delay-shift and may provide a convenient routing for identifying the real sources of pre-pulses in both chirped-pulse amplification (CPA) and optical parametric chirped-pulse amplification (OPCPA) systems. The empirical formula agrees well with the experimental results both in the CPA and the OPCPA systems. Besides, a numerical simulation is also carried out to further verify the empirical formula.

Femtosecond oscillators with gigahertz (GHz) repetition rate are appealing sources for spectroscopic applications benefiting from the individually accessible and high-power comb line. The mode mismatch between the potent pump laser diode (LD) and the incredibly small laser cavity, however, limits the average output power of existing GHz Kerr-lens mode-locked (KLM) oscillators to tens of milliwatts. Here, we present a novel method that solves the difficulty and permits high average power LD-pumped KLM oscillators at GHz repetition rate. We propose a numerical simulation method to guide the realization of Kerr-lens mode-locking and comprehend the dynamics of the Kerr-lens mode-locking process. As a proof-of-principle demonstration, an LD-pumped Yb:KGW oscillator with up to 6.17-W average power and 184-fs pulse duration at 1.6-GHz repetition rate is conducted. The simulation had a good agreement with the experimental results. The cost-effective, compact and powerful laser source opens up new possibilities for research and industrial applications.

Despite the salutary effects of mask wearing broadly recognized during the COVID-19 pandemic, little is known about the consequences of wearing masks in the workplace. The current research raises the question of whether and how mask wearing may impact employees' emotional well-being at work. Drawing on emotion regulation theory (e.g., Gross, 1998, 2015), we propose that mask wearing enables employees to adopt more authentic emotional displays, which in turn decreases emotional exhaustion. Furthermore, guided by the social interaction model of emotion regulation (Coté, 2005), we further posit that for employees whose work requires more frequent face-to-face interaction, the positive impact of mask wearing on emotional exhaustion becomes more significant. Across a pilot study and a three-wave field survey, we find support for this hypothesized model. Implications of these findings for future theorizing and research on mask wearing are discussed.

The reading the mind in the eyes test (RMET) – which assesses the theory of mind component of social cognition – is often used to compare social cognition between patients with schizophrenia and healthy controls. There is, however, no systematic review integrating the results of these studies. We identified 198 studies published before July 2020 that administered RMET to patients with schizophrenia or healthy controls from three English-language and two Chinese-language databases. These studies included 41 separate samples of patients with schizophrenia (total n = 1836) and 197 separate samples of healthy controls (total n = 23 675). The pooled RMET score was 19.76 (95% CI 18.91–20.60) in patients and 25.53 (95% CI 25.19–25.87) in controls (z = 12.41, p < 0.001). After excluding small-sample outlier studies, this difference in RMET performance was greater in studies using non-English v. English versions of RMET (Chi [Q] = 8.54, p < 0.001). Meta-regression analyses found a negative association of age with RMET score and a positive association of years of schooling with RMET score in both patients and controls. A secondary meta-analysis using a spline construction of 180 healthy control samples identified a non-monotonic relationship between age and RMET score – RMET scores increased with age before 31 and decreased with age after 31. These results indicate that patients with schizophrenia have substantial deficits in theory of mind compared with healthy controls, supporting the construct validity of RMET as a measure of social cognition. The different results for English versus non-English versions of RMET and the non-monotonic relationship between age and RMET score highlight the importance of the language of administration of RMET and the possibility that the relationship of aging with theory of mind is different from the relationship of aging with other types of cognitive functioning.

The objective of this study was to explore the geological origin of glauconite, which is believed to precipitate and mature very slowly (~1 Myr) in neritic environments (shallow water, oceanic coastal zones, at water depths of 100–200 m) with very low sedimentation rates. A series of simulation experiments was designed and carried out in sealed tubes placed in an oven and heated to a constant temperature of 50°C (±2°C) for 60 or 150 d. The parent materials used for these experiments were two low-Fe montmorillonites with different crystallinities. The montmorillonites were introduced to solutions with concentrations of 0.02–0.1 mol/L Fe3+ and 0.05–0.2 mol/L K+ with various values of pH and Eh. The products were analyzed using X-ray powder diffraction (XRD), Fourier-transform infrared (FTIR) spectrometry, electron spin resonance (ESR) spectrometry, scanning electron microscopy (SEM), and Mössbauer spectroscopy. The morphological changes from parent material to product were observed under SEM, which revealed the formation of a flaky mineral (e.g. a product formed in the interstitial spaces between montmorillonite crystals). The formation of a flaky mineral indicates that the product is a layer silicate. Qualitative analysis of XRD patterns revealed that the main product phase was a mica group mineral and the d060 value was consistent with the presence of glauconite (0.152 nm) and/or Fe-illite (0.150 nm). A glauconite and Fe-illite mineral assemblage formed in a weakly acidic solution, while Fe-illite, mixed-layer Fe-illite, and montmorillonite formed in neutral and alkaline solutions. Stretching vibrations of Fe(III)Fe(III)OH-AlFe(II)OH and/or MgFe(III)OH were observed in FTIR spectra (3550–3562 cm−1) of the products formed in acidic solutions, which along with the g = 1.978 ESR signal indicated that Fe(III) entered octahedral positions in the tetrahedral/octahedral/tetrahedral layer (TOT) platelets. The AlFe(II)OH-MgFe(III)OH (3550–3562 cm−1) and AlFe(III)OH (870 cm−1) vibrations were only observed in products formed in neutral and alkaline solutions. Analysis of the Mössbauer spectra showed that Fe(III) substituted for Al and Mg in the cis octahedral sites of montmorillonite. The simulation experiments demonstrated that the pH and redox conditions (Eh) of the environment controlled the nature of the product mineral species. Results of the present study revealed that glauconitization and illitization occurred under different conditions, where glauconitization preferentially occurred in an acidic environment and illitization preferentially occurred in a nearly neutral to alkaline environment.

Mucopolysaccharidosis type I is an inborn error of glycosaminoglycan catabolism with phenotypes ranging from severe (Hurler syndrome) to attenuated (Hurler–Scheie and Scheie syndromes). Cardiovascular involvement is common and contributes significantly to morbidity and mortality. We conducted a retrospective analysis of the prevalence and natural history of cardiac abnormalities in treatment-naïve individuals enrolled in the international Mucopolysaccharidosis Type I Registry. Interrogation of echocardiography data (presence of cardiac valve regurgitation and/or stenosis; measurements of left ventricular chamber dimensions in diastole and systole, diastolic left ventricular posterior wall and interventricular septal thicknesses and ventricular systolic function (shortening fraction)) showed that mitral regurgitation was the most common and earliest finding for individuals with both severe (58.3%, median age 1.2 years) and attenuated (74.2%, median age 8.0 years) disease. Left-sided valve stenosis was also common in individuals with attenuated disease (mitral 30.3%; aortic 25%). Abnormal ventricular wall and septal thickness (Z-scores ≥2) were observed early in both phenotypes. Z-scores for diastolic left ventricular posterior wall and interventricular septal thicknesses increased with age in the severe phenotype (annualised slopes of 0.2777 [p = 0.037] and 0.3831 [p = 0.001], respectively); a similar correlation was not observed in the attenuated phenotype (annualised slopes of −0.0401 [p = 0.069] and −0.0029 [p = 0.875], respectively). Decreased cardiac ventricular systolic function (defined as shortening fraction <28%) was uncommon but, when noted, was more frequent in infants with the severe phenotype. While cardiac abnormalities occur early in both severe and attenuated mucopolysaccharidosis type I, the pattern of valve dysfunction and progression of ventricular abnormalities vary by phenotype.

A continuous-wave (CW) single-longitudinal-mode (SLM) Raman laser at 1240 nm with power of up to 20.6 W was demonstrated in a free-running diamond Raman oscillator without any axial-mode selection elements. The SLM operation was achieved due to the spatial-hole-burning free nature of Raman gain and was maintained at the highest available pump power by suppressing the parasitic stimulated Brillouin scattering (SBS). A folded-cavity design was employed for reducing the perturbing effect of resonances at the pump frequency. At a pump power of 69 W, the maximum Stokes output reached 20.6 W, corresponding to a 30% optical-to-optical conversion efficiency from 1064 to 1240 nm. The result shows that parasitic SBS is the main physical process disturbing the SLM operation of Raman oscillator at higher power. In addition, for the first time, the spectral linewidth of a CW SLM diamond Raman laser was resolved using the long-delayed self-heterodyne interferometric method, which is 105 kHz at 20 W.

A single-shot measurement of electron emittance was experimentally accomplished using a focused transfer line with a dipole. The betatron phase of electrons based on laser wakefield acceleration (LWFA) is energy dependent owing to the coupling of the longitudinal acceleration field and the transverse focusing (defocusing) field in the bubble. The phase space presents slice information after phase compensation relative to the center energy. Fitting the transverse size of the electron beam at different energy slices in the energy spectrum measured 0.27 mm mrad in the experiment. The diagnosis of slice emittance facilitates local electron quality manipulation, which is important for the development of LWFA-based free electron lasers. The quasi-3D particle-in-cell simulations matched the experimental results and analysis well.

Maximizing is characterized by aspirations for the highest standards. The current study explored the relationship between maximizing and risk-taking tendencies in decisions subject to risk. We propose that people first refer to expectation (i.e., the overall utility expected from an alternative) when taking risky decisions. If expectation clearly identifies the best option, maximizing will not be correlated with risk-taking tendencies. If not, people refer to maximizing to reach a decision. Maximizing will be positively associated with risk-taking tendencies because the “upper bound” of risky options helps achieve the goal of seeking the best. Four studies showed that risk-taking tendencies increased with maximizing when the options had similar expectations (Studies 1 to 3). When expectations between options were clearly different (vs. similar), the positive relationship between maximizing and risk-taking tendencies was reduced (Study 4). These findings provide an insight into how maximizing is related to risk seeking.

This article reports the results of a study investigating the impact of family orientation, the number of years spent working, and their interaction on childbearing age among women who have recently completed their childbearing.

We find that a traditional family orientation and a higher number of working years contribute to delaying the childbearing age. People with a traditional family orientation can delay childbearing because they want to make elaborate material preparations for raising their children. Women who have worked many years are more aware of gender inequality in the domestic sphere (having been exposed to gender equality in the workplace). This is especially the case for women with a modern family orientation. However, this does not necessarily lead people with a modern family orientation to delay childbearing. They may advance their childbearing in an effort to escape an oppressive domestic environment in their families of origin.

We report dispersion management based on a mismatched-grating compressor for a 100 PW level laser, which utilizes optical parametric chirped pulse amplification and also features large chirped pulse duration and an ultra-broadband spectrum. The numerical calculation indicates that amplified pulses with 4 ns chirped pulse duration and 210 nm spectral bandwidth can be directly compressed to sub-13 fs, which is close to the Fourier-transform limit (FTL). More importantly, the tolerances of the mismatched-grating compressor to the misalignment of the stretcher, the error of the desired grating groove density and the variation of material dispersion are comprehensively analyzed, which is crucially important for its practical application. The results demonstrate that good tolerances and near-FTL compressed pulses can be achieved simultaneously, just by keeping a balance between the residual second-, third- and fourth-order dispersions in the laser system. This work can offer a meaningful guideline for the design and construction of 100 PW level lasers.

The wheat aphid Sitobion miscanthi (CWA) is an important harmful pest in wheat fields. Insecticide application is the main method to effectively control wheat aphids. However, CWA has developed resistance to some insecticides due to its extensive application, and understanding resistance mechanisms is crucial for the management of CWA. In our study, a new P450 gene, CYP4CJ6, was identified from CWA and showed a positive response to imidacloprid and thiamethoxam. Transcription of CYP4CJ6 was significantly induced by both imidacloprid and thiamethoxam, and overexpression of CYP4CJ6 in the imidacloprid-resistant strain was also observed. The sensitivity of CWA to these two insecticides was increased after the knockdown of CYP4CJ6. These results indicated that CYP4CJ6 could be associated with CWA resistance to imidacloprid and thiamethoxam. Subsequently, the posttranscriptional regulatory mechanism was assessed, and miR-316 was confirmed to participate in the posttranscriptional regulation of CYP4CJ6. These results are crucial for clarifying the roles of P450 in the resistance of CWA to insecticides.