The delay-shift of the pre-pulse may mislead the determination of its origination and cause problems for the temporal contrast improvement of high-peak-power lasers, especially when the corresponding post-pulse is beyond the time window of the measurement device. In this work, an empirical formula is proposed to predict the delay-shift of pre-pulses for the first time. The empirical formula shows that the delay-shift is proportional to the square of the post-pulse’s initial delay, and also the ratio of the third-order dispersion to the group delay dispersion’s square, which intuitively reveals the main cause for the delay-shift and may provide a convenient routing for identifying the real sources of pre-pulses in both chirped-pulse amplification (CPA) and optical parametric chirped-pulse amplification (OPCPA) systems. The empirical formula agrees well with the experimental results both in the CPA and the OPCPA systems. Besides, a numerical simulation is also carried out to further verify the empirical formula.

The development of high-intensity ultrafast laser facilities provides the possibility to create novel physical phenomena and matter states. The timing fluctuation of the laser pulses is crucial for pump–probe experiments, which is one of the vital means to observe the ultrafast dynamics driven by intense laser pulses. In this paper, we demonstrate the timing fluctuation characterization and control of the front end of a 100-PW laser that is composed of a high-contrast optical parametric amplifier (seed) and a 200-TW optical parametric chirped pulse amplifier (preamplifier). By combining the timing jitter measurement with a feedback system, the laser seed and preamplifier are synchronized to the reference with timing fluctuations of 1.82 and 4.48 fs, respectively. The timing system will be a key prerequisite for the stable operation of 100-PW laser facilities and provide the basis for potential pump–probe experiments performed on the laser.

Microcapsules are successfully used in various applications such as self-healing, drug delivery and military camouflage. The shells of the microcapsules based on the traditional surfactant-stabilized emulsion template method are often single organic materials. The surfactants generally have insufficient stability against demulsification during preparation of the microcapsules. In the present study, kaolinite was used as an emulsifier for stabilizing Pickering emulsions and subsequently as an enhancer for forming microcapsules. Kaolinite-armoured polyurea microcapsules were fabricated based on the interfacial polymerization of isophorone diisocyanate at the oil–water interfaces of kaolinite-stabilized Pickering emulsions. The prepared microcapsules with core–shell structure were spherical and exhibited good dispersibility in anhydrous ethanol. The shell thickness (~0.5–1.0 μm) and diameter (~20.0–160.0 μm) of kaolinite-armoured polyurea microcapsules may be tailored by varying the dosages of isophorone diisocyanate and kaolinite and the emulsifying speed of the high-shear homogenizer. Hence, the encapsulation and release performance of microcapsules may be controlled. The kaolinite particles were embedded and armoured in a polyurea matrix. The formed kaolinite-embedded and -armoured polyurea structures might prolong the release of the encapsulated lipophilic Sudan Red (III) from 20 to 45 h. The microcapsules have controllable encapsulation and release characteristics for lipophilic compounds and are cost effective, making them suitable pesticides.

In this paper, we report the recent progress on the $1~\text{PW}/0.1~\text{Hz}$ laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The SULF-1 PW laser beamline is based on the double chirped pulse amplification (CPA) scheme, which can generate laser pulses of 50.8 J at 0.1 Hz after the final amplifier; the shot-to-shot energy fluctuation of the amplified pulse is as low as 1.2% (std). After compression, the pulse duration of 29.6 fs is achieved, which can support a maximal peak power of 1 PW. The contrast ratio at $-80~\text{ps}$ before main pulse is measured to be $2.5\times 10^{-11}$. The focused peak intensity is improved by optimizing the angular dispersion in the grating compressor. The maximal focused peak intensity can reach $2.7\times 10^{19}~\text{W}/\text{cm}^{2}$ even with an $f/26.5$ off-axis parabolic mirror. The horizontal and vertical angular pointing fluctuations in 1 h are measured to be 1.89 and $2.45~\unicode[STIX]{x03BC}\text{rad}$, respectively. The moderate repetition rate and the good stability are desirable characteristics for laser–matter interactions. The SULF-1 PW laser beamline is now in the phase of commissioning, and preliminary experiments of particle acceleration and secondary radiation under 300–400 TW/0.1 Hz laser condition have been implemented. The progress on the experiments and the daily stable operation of the laser demonstrate the availability of the SULF-1 PW beamline.

Previous studies have supported the theory that there is a positive association between ferritin and carotid atherosclerosis in Western people. Diet plays an important role in determining serum ferritin concentration. Asian dietary patterns are different from Western dietary patterns, implying that there may be a difference in the association of ferritin with carotid atherosclerosis between Asian and Western people. However, few studies focus on the association between ferritin and carotid atherosclerosis among Asians. The aim of this study was to investigate how serum ferritin levels are associated with carotid atherosclerosis in an Asian adult population. A cross-sectional assessment was performed in 8302 adults in Tianjin, China. Carotid intima-media thickness (IMT) and plaques were assessed using ultrasonography, and serum ferritin was measured using the protein chip-chemiluminescence method. Multiple logistic regression analysis was used to examine the association between quartiles of serum ferritin concentration and carotid atherosclerosis. In the present study, the overall prevalence of IMT and carotid plaques in participants is 29·2 and 22·7 %, respectively. In women, after adjustments for potentially confounding factors, the OR of IMT and carotid plaques by increasing serum ferritin quartiles were 1·00, 1·39 (95 % CI 0·98–1·99), 1·39 (95 % CI 0·99–1·97), 1·81 (95 % CI 1·30–2·55) (Pfor trend<0·001) and 1·00, 1·24 (95 % CI 0·89–1·73), 1·18 (95 % CI 0·85–1·65), 1·59 (95 % CI 1·15–2·20) (Pfor trend<0·01), respectively. However, no association was found between serum ferritin and carotid atherosclerosis in men. The study demonstrated that increased serum ferritin levels are independently associated with IMT and carotid plaques in Asian women but not in Asian men.

We develop a splicing technology of Ti:sapphire crystals for a high-energy chirped pulse amplifier laser system that can suppress the parasitic lasing to improve the amplification efficiency compared to a large-size single Ti:sapphire crystal amplifier. Theoretical investigations on the characteristics of the amplifier with four splicing Ti:sapphire crystals, such as parasitic-lasing suppression and amplification efficiencies, are carried out. Some possible issues resulting from this splicing technology, including spectral modulation, stretching or splitting of the temporal profile, and the sidelobe generation in the spatial domain (near field and far field), are also investigated. Moreover, the feasibility of the splicing technology is preliminarily demonstrated in an experiment with a small splicing Ti:sapphire crystals amplifier. The temporal profile and spatial distribution of the output pulse from the splicing Ti:sapphire crystal amplifier are discussed in relation to the output pulse from a single Ti:sapphire crystal amplifier.

In the preparation process for scanning electron microscopy (SEM), flexed silkworm embryos typically assume several curled shapes with irregular postures that obscure morphological details during SEM observation. We describe a preparation technique based on glycerol substitution for better SEM visualization of straight and flat silkworm embryos. Glycerol has high viscosity, low vapor pressure, and sufficient electrical conductivity. Silkworm embryos were infiltrated with glycerol and arranged in a straight posture or flattened using a cover slip. Samples were directly observed by SEM without additional dehydration, drying, or coating procedures. The complete ventral side could be easily viewed in one image. Recoating alleviated the charging phenomenon. This represents a simple method for preparation of straight and flat samples from curled biological specimens for SEM observation.