Birds in flight are prone to collide with various transparent or reflective structures. While bird–window collision has been recognised as a critical conservation issue, collision with other transparent structures has been less understood. Noise barriers made of transparent materials are considered critical hazards for birds; however, little is known about the bird mortality they cause. We conducted the first nationwide-scale estimates of bird-collision mortality caused by transparent noise barriers (TNBs) along roads in the Republic of Korea. The total length of existing roadside transparent noise barriers was estimated at 1,416 km nationwide (as of 2018), and it had been increasing exponentially. Based on carcass surveys at 25 sites, daily mortality at the observed barriers was 0.335 ± 1.132 birds/km on average, and no difference in observed mortality was detected between both sides of a single barrier and between road types (i.e. local roads and motorways). Finally, we estimated that approximately 186,000 birds (95% confidence interval: 162,465–204,812 birds) are killed annually by collisions with roadside TNBs. As privately installed barriers were not considered in this study, the actual mortality is likely be higher than our estimates. Thus, collision with TNBs could become an emerging threat to avian conservation, especially in developing and urbanising regions around the world. As such structures are not formally recognised as conservation issues of importance, more systematic surveys aided by citizen science, both for the status of TNBs and bird-collision mortality, are needed in addition to management and mitigation policies.

In this review, we introduce our recent applications of deep learning to solar and space weather data. We have successfully applied novel deep learning methods to the following applications: (1) generation of solar farside/backside magnetograms and global field extrapolation based on them, (2) generation of solar UV/EUV images from other UV/EUV images and magnetograms, (3) denoising solar magnetograms using supervised learning, (4) generation of UV/EUV images and magnetograms from Galileo sunspot drawings, (5) improvement of global IRI TEC maps using IGS TEC ones, (6) one-day forecasting of global TEC maps through image translation, (7) generation of high-resolution magnetograms from Ca II K images, (8) super-resolution of solar magnetograms, (9) flare classification by CNN and visual explanation by attribution methods, and (10) forecasting GOES solar X-ray profiles. We present major results and discuss them. We also present future plans for integrated space weather models based on deep learning.

This article examines the effects of electoral systems on issue ownership. This study argues that electoral rules significantly affect issue ownership because they prompt candidates to adopt different types of electoral campaigns. Compared to the single non-transferable vote (SNTV) system, the mixed-member majoritarian (MMM) system prods candidates to change the pattern of electoral campaigns from candidate-centred to issue-centred competition. In particular, partisan issue effects are more effective in gaining votes under the MMM. To support the argument, I find evidence from content analyses of party manifestos and multinomial logistic regression models of electoral surveys between the pre-reform and post-reform elections in Japan.

We trace Sn nanoparticles (NPs) produced from SnO2 nanotubes (NTs) during lithiation initialized by high energy e-beam irradiation. The growth dynamics of Sn NPs is visualized in liquid electrolytes by graphene liquid cell transmission electron microscopy. The observation reveals that Sn NPs grow on the surface of SnO2 NTs via coalescence and the final shape of agglomerated NPs is governed by surface energy of the Sn NPs and the interfacial energy between Sn NPs and SnO2 NTs. Our result will likely benefit more rational material design of the ideal interface for facile ion insertion.

To evaluate the appropriateness of the screening strategy for healthcare personnel (HCP) during a hospital-associated Middle East Respiratory Syndrome (MERS) outbreak, we performed a serologic investigation in 189 rRT-PCR–negative HCP exposed and assigned to MERS patients. Although 20%–25% of HCP experienced MERS-like symptoms, none of them showed seroconversion by plaque reduction neutralization test (PRNT).

Infect Control Hosp Epidemiol 2017;38:234–238

In this paper, the electrical properties of bottom-gate (BG) polycrystalline silicon (poly-Si) thin-film transistors (TFTs) by NiSi2 seed-induced lateral crystallization (SILC) and its applications are presented. Sequential lateral solidification (SLS), which is one of crystallization methods, is known to have poor electrical properties of TFTs with BG structures due to problems induced by laser. Therefore, the laser method cannot be used to well-developed production line of amorphous-Si (a-Si) TFT, resulting in large initial investment cost to change fabrication procedures. On the other hand, the BG poly-Si TFT by SILC (SILC-BGPS TFT) has basically compatible process flows with that of the a-Si TFT. The SILC-BGPS TFT exhibited threshold voltage of -3.9 V, steep subthreshold slope of 130 mV/dec, a high field-effect mobility of 129 cm2/Vs , and I on /I off ratio of ∼106.

In this paper, we propose and examine a force-resisting balance control strategy for a walking biped robot under the application of a sudden unknown, continuous force. We assume that the external force is acting on the pelvis of a walking biped robot and that the external force in the z-direction is negligible compared to the external forces in the x- and y-directions. The main control strategy involves moving the zero moment point (ZMP) of the walking robot to the center of the robot's sole resisting the externally applied force. This strategy is divided into three steps. The first step is to detect an abnormal situation in which an unknown continuous force is applied by examining the position of the ZMP. The second step is to move the ZMP of the robot to the center of the sole resisting the external force. The third step is to have the biped robot convert from single support phase (SSP) to double support phase (DSP) for an increased force-resisting capability. Computer simulations and experiments of the proposed methods are performed to benchmark the suggested control strategy.

Nitrogen fixation in legumes is an important agricultural trait that results from symbiosis between the root and rhizobia. To understand the molecular basis of nodulation, recent research has been focused on the identification of nodulation-related genes by functional analysis using two major model legumes, Medicago truncatula and Lotus japonicus. Thus far, three important processes have been discovered, namely Nod factor (NF) perception, NF signalling and autoregulation of nodulation. Nevertheless, application of the results of these studies is limited for non-model legume crops because a reference genome is unavailable. However, because the cost of whole-transcriptome analysis has dropped dramatically due to the Next generation sequencer (NGS) technology, minor crops for which reference sequences are yet to be constructed can still be studied at the genome level. In this study, we sequenced the leaf and root transcriptomes of Vigna angularis (accession IT213134) and de novo assembled. Our results demonstrate the feasibility of using the transcriptome assembly to effectively identify tissue-specific peptide clusters related to tissue-specific functions and species-specific nodulation-related genes.

Direct heteroarylation polymerization was employed to synthesize a novel low bandgap polymer, used as a p-type material of polymer photovoltaic cells. To achieve low bandgap of conjugated polymers, electron donor-acceptor (D-A) alternating strategy was used. The electron-donating 3-alkylthiophene and electron-withdrawing cyanothiophene were coupled to be polymerized via direct heteroarylation polymerization. The cyano moiety of the polymer backbone allowed a strong intermolecular interaction between neighboring chains and improved the structural perfection of the crystal structure on the substrate. The solar cell devices of ITO/PEDOT:PSS/P3HT:PCBM/LiF/Al were fabricated on ITO-coated glass substrate.

Geochemical characteristics of marine sediment from the southern Drake Passage were analyzed to reconstruct variations in sediment provenance and transport paths during the late Quaternary. The 5.95 m gravity core used in this study records paleoenvironmental changes during the last approximately 600 ka. Down-core variations in trace element, rare earth element, and Nd and Sr isotopic compositions reveal that sediment provenance varied according to glacial cycles. During glacial periods, detrital sediments in the southern Drake Passage were mostly derived from the nearby South Shetland Islands and shelf sediments. In contrast, interglacial sediments are composed of mixed sediments, derived from both West Antarctica and East Antarctica. The East Antarctic provenance of the interglacial sediments was inferred to be the Weddell Sea region. Sediment input from the Weddell Sea was reduced during glacial periods by extensive ice sheets and weakened current from the Weddell Sea. Sediment supply from the Weddell Sea increased during interglacial periods, especially those with higher warmth such as MIS 5, 9, and 11. This suggests that the influence of deep water from the Weddell Sea increases during interglacial periods and decreases during glacial periods, with the degree of influence increasing as interglacial intensity increases.

Recent extensive nanomechanical experiments have revealed that the instantaneous strength and plasticity of a material can be significantly affected by the size (of sample, microstructure, or stressed zone). One more important property to be added into the list of size-dependent properties is time-dependent plastic deformation referred to as creep; it has been reported that the creep becomes more active at the small scale. Analyzing the creep in the small scale can be valuable not only for solving scientific curiosity but also for obtaining practical engineering information about the lifetime or durability of advanced small-scale structures. For the purpose, nanoindentation creep experiments have been widely performed by far. Here we critically review the existing nanoindentation creep methods and the related issues and finally suggest possible novel ways to better estimate the small-scale creep properties.