Quaternary marine terrace deposits consisting of gravels interbedded with thin sandy gravel layers have been subjected to subaerial weathering. Restricted to the sandy gravel layers, allophane gel either replaced bytownite sands to form a pseudomorph or coated the pebbles. The allophane has an average Al/Si atomic ratio of 1.5 with 45% H2O. The sandy gravels were originally rich in bytownite (av. An86) sands derived from underlying Tertiary basaltic lapilli tuff. The highly soluble and aluminous bytownite favored the formation of allophane. In the sandy gravel layers, pebbles coated with allophane gel were almost fresh whereas those in the gravel layers were highly weathered to form halloysite-rich clays. Allophane gels acted as a somewhat impermeable geochemical barrier impeding a mineral-water reaction in the bytownite-rich sandy gravel layers and thus significantly retarding pebble weathering, while prolonged weathering in the gravel layers resulted in the severe decomposition of pebbles. Bytownite protected the pebbles against weathering, implying that minor soluble minerals might be one of the factors in the natural variation of the weathering rates of rocks and sediments.

A quantitative analysis of In concentration in InGaN/GaN multiquantum wells in light-emitting diodes was carried out using high-resolution transmission electron microscopy (HRTEM) and high-angle annual dark-field scanning TEM (HAADF-STEM). The In composition in InGaN was evaluated by the precise measurement of c-lattice parameters in the HRTEM micrographs, which increase with increasing In composition. The reliability of the results was confirmed by high-resolution x-ray diffraction measurements and Rutherford backscattering spectrometry. Quantitative In compositions can, therefore, be determined using HRTEM. We tried to determine the quantitative In compositions in InGaN by analyzing the intensity profiles of the HAADF-STEM images. However, several problems were encountered, such as differences in the thickness of the region observed, carbon contamination, and ion beam damage during specimen preparation. Therefore, relative differences in composition were observed in the HAADF-STEM images.

An indexed offset distance of the tricuspid septal leaflet ⩾8 mm/m2 is a quantitative criterion for the diagnosis of Ebstein’s anomaly. The purpose of this study was to investigate the validity of this criterion for the discrimination of Ebstein’s anomaly from pulmonary atresia with intact ventricular septum in neonatal patients. A total of 122 neonatal patients, 56 with Ebstein’s anomaly and 66 with pulmonary atresia with intact ventricular septum, were enrolled. Diagnosis of each anomaly was based on typical morphologic features. Echocardiographic variables, including the offset distance of the tricuspid septal leaflet, were measured via an offline analysis of images recorded before 1 month of age. The offset distance of the tricuspid septal leaflet was indexed by the body surface area, and the indexed offset distances in the Ebstein’s anomaly and pulmonary atresia with intact ventricular septum groups were 34.2 mm/m2 (7.1–119.1 mm/m2) and 7.2 mm/m2 (0.0–25.6 mm/m2), respectively. The indexed offset distance was ⩾8 mm/m2 in 29 (43.9%) of the patients with pulmonary atresia with intact ventricular septum; clinical and echocardiographic characteristics were comparable between these 29 patients and the remaining 37 patients with pulmonary atresia with intact ventricular septum. When an indexed offset distance ⩾8 mm/m2 was applied as a cut-off for the diagnosis of Ebstein’s anomaly, the sensitivity was 0.963 and the specificity was 0.561. In conclusion, indexed offset distance ⩾8 mm/m2 cannot be used as a cut-off for the diagnosis of complicated Ebstein’s anomaly in neonatal patients with pulmonary atresia with intact ventricular septum.

The crystallization of amorphous silicon thin films by electron beam exposure was studied. Amorphous silicon and silicon dioxide layers were deposited on glass substrate by PECVD at 360 °C. The optimization to crystallize 300 nm thick amorphous silicon film was carried out at a RF power of 300 W, DC voltage of 1500 V, Argon gas flow rate of 3 sccm and a distance between electron beam mesh and sample of 40 mm. High quality nano-crystalline silicon films with an activation energy of 0.47 eV from conductivity, a grain size of 15–45 nm from SEM and Raman crystalline volume fraction of 93.1% were fabricated. We expect that e-beam exposure will be applied to crystallization of amorphous silicon films.

Background: The influences of demographics, culture, language, and environmental changes on Mini-Mental State Examination (MMSE) scores are considerable.

Methods: Using a sample of 7452 healthy, community-dwelling elderly Koreans, aged 55 to 94 years, who participated in the four ongoing geriatric cohorts in Korea, we investigated demographic influences on MMSE scores and derived normative data for this population. Geropsychiatrists strictly excluded subjects with cognitive disorders according to the protocol of the Korean version of the Consortium to Establish a Registry for Alzheimer's Disease Assessment Packet (CERAD-K) Clinical Assessment Battery (CERAD-K-C).

Results: Education (standardized β = 0.463), age (standardized β = −0.303), and gender (standardized β = −0.057) had significant effects on MMSE scores (p < 0.001). The score of MMSE increase 0.379 point per 1-year education, decrease 0.188 per 1-year older, and decrease 0.491 in women compared to men. Education explained 30.4% of the scores’ total variance, which was much larger than the variances explained by age (8.4%) or gender (0.3%). Accordingly, we present normative data for the MMSE stratified by education (0, 1–3, 4–6, 7–9, 10–12, and ≥ 13 years), age (60–69, 70–79, and 80–89 years), and gender.

Conclusions: We provide contemporary education-, age-, and gender-stratified norms for the MMSE, derived from a large, community-dwelling elderly Korean population sample, which could be useful in evaluating individual MMSE scores.

When a drop is deposited on a superhydrophilic micropillar array, the upper part of the drop (referred to as the bulk) collapses while the bottom part penetrates into the gaps of the array, forming a fringe film. Here we quantify the early stage dynamics of this process using a combination of experiment and theory. We show that the circular front of the fringe film spreads like t1/2, t being time, when coupled to the bulk flow. However, the film is found to advance like t1/3 through faceted zippering in the absence of the bulk. We then show that the spreading of the bulk and the entire drop footprint follows a power law (t1/4) that is different from Washburn's law. This work can be a starting point to completely understand the spreading of liquids on superhydrophilic surfaces and opens questions specific to superwetting behaviour including the criteria to determine whether the fringe film will expand through lateral zipping or advance radially outwards.

The unique structural, electronic, and mechanical properties of single-walled carbon nanotubes (SWNTs) have opened the doors to developments that push the limits of science. These advancements not only further scientific discovery, but also result in the development of everyday practical applications. These applications vary from singlemolecule sensors to nano-scaled transistors to multi-modal biosensors. This article focuses on three distinct developments made as a result of recent advances in spectroscopy of SWNTs. The first system examines the use of SWNTs for molecular detection using near-infrared light to produce tunable fluorescent sensors that are highly photostable. The second system examines the use of a 4-hydroxybenzene diazonium reagent to sort SWNTs based on electronic structure to create on-chip modifications of nano-electronic devices. The third system characterizes nanotube networks for such applications as flexible electronics, exploring the irreversible binding of adsorbates onto nanotube networks using electrical transport and Raman spectroscopy.

Human complement regulatory protein hCD46 may reduce the hyperacute rejection (HAR) in pig-to-human xenotransplantation. In this study, an hCD46 gene was introduced into porcine embryonic germ (EG) cells. Treatment of human serum did not affect the survival of hCD46-transgenic EG cells, whereas the treatment significantly reduced the survival of non-transgenic EG cells (p < 0.01). The transgenic EG cells presumably capable of alleviating HAR were transferred into enucleated oocytes. Among 235 reconstituted oocytes, 35 (14.9%) developed to the blastocyst stage. Analysis of individual embryos indicated that 80.0% (28/35) of embryos contained the transgene hCD46. The result of the present study demonstrates resistance of hCD46-transgenic EG cells against HAR, and the usefulness of the transgenic approach may be predicted by this cytolytic assessment prior to actual production of transgenic pigs. Subsequently performed EG cell nuclear transfer gave rise to hCD46-transgenic embryos. Further study on the transfer of these embryos to recipients may produce hCD46-transgenic pigs.

We developed a new Cu–Zn wetting layer for Pb-free solders. By adding Zn to the Cu wetting layer, intermetallic growth in the Sn–Ag–Cu (SAC) solder interfaces was delayed. Cu3Sn intermetallic compounds and microvoids were not observed in the SAC/Cu–Zn interfaces after aging. The drop reliability of the SAC solder/Cu–Zn joints was excellent.

Background: This study aims to establish the incidence rates of Alzheimer's disease (AD) and to understand the relations between illiteracy and AD in the Korean Yonchon survey cohort.

Methods: A community-based, dementia-free cohort of 966 people aged 65 years and older was followed up for an average of 5.4 ± 1.60 years to detect incident AD cases using a two-phase procedure. Age-specific incidence rates were calculated using a person-years approach with Poisson distribution confidence intervals. Data were analyzed using the Cox proportional hazards model to find the hazard ratio of illiteracy.

Results: The participating percentage of the survivors was 86.4% and 74 subjects were diagnosed with AD. Incidence rates per 1000 person-years were 20.99 (95% CI 16.48 to 26.35) for AD. The hazard ratio of illiteracy was 1.78 (95% CI 1.08 to 2.93) adjusted for age, sex, educational level. AD developed more rapidly with aging in the illiterate group than in the literate group.

Conclusions: Illiteracy is associated with a higher risk of AD and the risk increases with age.

To enhance Pt utilization in the fuel-cell electrode by microscopically controlling the distribution of liquid electrolytes around Pt catalysts, the amphiphilic surfactant tergitol phosphate was synthesized and introduced into the fuel-cell electrode. The chemical structure of the surfactant was determined by 1H-nuclear magnetic resonance, and its adsorption property on Pt–C catalyst was ascertained by Fourier transform infrared analysis. The electrode into which the amphiphilic surfactants were incorporated showed improved performance, and especially the amphiphilic surfactant with polyethylene oxide, NPE10-OPO(OH)2, produced higher cell performance.

We have fabricated a new magnetic field enhanced solid phase crystallization (FESPC) polycrystalline silicon (poly-Si) thin film transistors (TFTs), which shows the excellent electrical characteristics and superior stability compared with hydrogenated amorphous silicon (a-Si:H) TFTs. The mobility (μ) and threshold voltage (VTH) of p-type TFTs of which the channel width and length are 5 μm and 7 μm, respectively are 31.98 cm2/Vs and -6.14 V, at VDS=-0.1 V. In the FESPC TFTs, the characteristics caused by grain boundary are remarkable due to large number of grain boundaries in the channel compared with poly-Si TFTs. The VTH of the TFT which have 5 μm channel length is smaller than that of 18 μm channel length by 1.36 V, which is considerably large value. It is due to the large number of grain boundaries in the channel and the high lateral electric field. The grain boundary potential barrier height is decreased, when the large lateral electric field is applied (which is called DIGBL effect). As a result of increased mobility, the drain current is increased, and VTH can be decreased. The activation energy (Ea) is strongly depended on the drain bias and the number of grain boundaries. is decreased, caused by the large drain bias and/or smaller number of grain boundaries. This decreased Ea can be reduced VTH due to increased the drain current. VTH of p-type poly-Si TFT employing FESPC on the glass substrate is affected by channel length and VDS due to energy barrier lowering effect at the grain boundary by increased lateral electrical field.

The hydrophobicity of poly Si is reported to introduce different polishing behavior with careful control of post CMP cleaning process. The purpose of this study was to investigate the effect of poly Si wettability on its CMP behavior. The adhesion force of polymeric particle on the poly Si wafer surfaces was measured in the KOH solution (pH 11) as a function of solution A concentration. Adhesion force decreased and saturated as a function of concentration of solution A. The change of surface wettability affects not only the polishing rates but also the level of contamination on wafer because the interactions between particles and substrates are dependent on the wettability of the surface. Also, hydrophobic poly Si surfaces attracted much more pad particles with water marks than hydrophilic