This study examined the sour grapes/sweet lemons rationalization through 2 conditions: ‘attainable’ (sweet lemons) and ‘unattainable’ (sour grapes), reflecting China’s 2019-nCoV vaccination strategy. The aim was to find ways to change people’s beliefs and preferences regarding vaccines by easing their safety concerns and encouraging more willingness to get vaccinated. An online survey was conducted from January 22 to 27, 2021, with 3,123 residents across 30 provinces and municipalities in the Chinese mainland. The direction of belief and preference changed in line with the sour grapes/sweet lemons rationalization. Using hypothetical and real contrasts, we compared those for whom the vaccine was relatively unattainable (‘sour grapes’ condition) with those who could get the vaccine easily (‘sweet lemons’). Whether the vaccine was attainable was determined in the early stage of the vaccine roll-out by membership in a select group of workers that was supposed to be vaccinated to the greatest extent possible, or, by being in the second stage when the vaccine was available to all. The attainable conditions demonstrated higher evaluation in vaccine safety, higher willingness to be vaccinated, and lower willingness to wait and see. Hence, we propose that the manipulation of vaccine attainability, which formed the basis of the application of sour grapes/sweet lemons rationalization, can be utilized as a means to manipulate the choice architecture to nudge individuals to ease vaccine safety concerns, reducing wait-and-see tendencies, and enhancing vaccination willingness. This approach can expedite universal vaccination and its associated benefits in future scenarios resembling the 2019-nCoV vaccine rollout.

In the double-cone ignition scheme of inertial confinement fusion, the head-on collision of two compressed fuel jets from the cone-tips forms an isochoric plasma, which is then heated suddenly by a MeV relativistic electron beam produced by ultra-intense picosecond laser pulses. This fast-heating process was studied experimentally at the Shenguang II upgrade laser facility. By observing temporal-resolved X-ray emission and the spatial-resolved X-ray spectrum, the colliding process and heating process are carefully studied. The colliding plasma was imaged to have dimensions of approximately 86 μm in the implosion direction and approximately 120 μm in the heating direction. By comparing the simulated plasma X-ray spectrum with experimental data, the electron temperature of the heated plasma was found to rapidly increase to 600 ± 50 eV, almost doubling the temperature achieved before the heating laser incidence.

Physically compliant actuator brings significant benefits to robots in terms of environmental adaptability, human–robot interaction, and energy efficiency as the introduction of the inherent compliance. However, this inherent compliance also limits the force and position control performance of the actuator system due to the induced oscillations and decreased mechanical bandwidth. To solve this problem, we first investigate the dynamic effects of implementing variable physical damping into a compliant actuator. Following this, we propose a structural scheme that integrates a variable damping element in parallel to a conventional series elastic actuator. A damping regulation algorithm is then developed for the parallel spring-damping actuator (PSDA) to tune the dynamic performance of the system while remaining sufficient compliance. Experimental results show that the PSDA offers better stability and dynamic capability in the force and position control by generating appropriate damping levels.

Dyes are toxic and considered to be extremely hazardous to natural environments. Hence, adsorbents to remove dyes from contaminated water are needed. To develop adsorbents with a high adsorption capacity for different dyes, easy separation, and low cost, a novel dye adsorbent was prepared by activating fly ash with NaOH. The adsorbent morphology, structure, and specific surface area were characterized using scanning electron microscopy, X-ray powder diffraction, and surface area measurements using N2 adsorption-desorption. The adsorption abilities of the synthesized adsorbents were examined based on methylene blue and acid fuchsin adsorption from water. The capabilities of the adsorbents as a function of adsorbent use, dye type, dye concentration, time, and pH were investigated and compared. The results for methylene blue and acid fuchsin adsorption were modeled using pseudo-second order kinetics and the Langmuir adsorption isotherm, respectively. These modified adsorbents synthesized from fly ash may provide a promising solution to purify dye-contaminated waste water with the advantages of high efficiency and low cost.

The velocity interferometer system for any reflector (VISAR) coupled with a streaked optical pyrometer (SOP) system is used as a diagnostic tool in inertial confinement fusion (ICF) experiments involving equations of state and shock timing. To validate the process of adiabatically compressing the fuel shell through precise tuning of shocks in experimental campaigns for the double-cone ignition (DCI) scheme of ICF, a compact line-imaging VISAR with an SOP system is designed and implemented at the Shenguang-II upgrade laser facility. The temporal and spatial resolutions of the system are better than 30 ps and 7 μm, respectively. An illumination lens is used to adjust the lighting spot size matching with the target size. A polarization beam splitter and λ/4 waveplate are used to increase the transmission efficiency of our system. The VISAR and SOP work at 660 and 450 nm, respectively, to differentiate the signals from the scattered lights of the drive lasers. The VISAR can measure the shock velocity. At the same time, the SOP system can give the shock timing and relative strength. This system has been used in different DCI campaigns, where the generation and propagation processes of multi-shock are carefully diagnosed.

A high-energy, alignment-insensitive, injection-seeded Q-switched Ho:yttrium aluminum garnet (YAG) single-frequency laser is developed. Both the slave Q-switched laser and the seed laser are Ho:YAG ring lasers based on a pair of corner cubic reflectors. The seed laser has an available power of 830 mW at 2096.667 nm. At 100 Hz, the Q-switched Ho:YAG laser provides a single-frequency pulsed output using injection-seeded technology. The 7.3 mJ single-frequency pulse energy from the slave laser has a pulse width of 161.2 ns and is scaled to 33.3 mJ after passing through the Ho:YAG single-pass amplifier. According to the measurement results of the heterodyne beating technique, the single-frequency pulse has a half-width of 4.12 MHz.

Coastal eutrophication and hypoxia remain a persistent environmental crisis despite the great efforts to reduce nutrient loading and mitigate associated environmental damages. Symptoms of this crisis have appeared to spread rapidly, reaching developing countries in Asia with emergences in Southern America and Africa. The pace of changes and the underlying drivers remain not so clear. To address the gap, we review the up-to-date status and mechanisms of eutrophication and hypoxia in global coastal oceans, upon which we examine the trajectories of changes over the 40 years or longer in six model coastal systems with varying socio-economic development statuses and different levels and histories of eutrophication. Although these coastal systems share common features of eutrophication, site-specific characteristics are also substantial, depending on the regional environmental setting and level of social-economic development along with policy implementation and management. Nevertheless, ecosystem recovery generally needs greater reduction in pressures compared to that initiated degradation and becomes less feasible to achieve past norms with a longer time anthropogenic pressures on the ecosystems. While the qualitative causality between drivers and consequences is well established, quantitative attribution of these drivers to eutrophication and hypoxia remains difficult especially when we consider the social economic drivers because the changes in coastal ecosystems are subject to multiple influences and the cause–effect relationship is often non-linear. Such relationships are further complicated by climate changes that have been accelerating over the past few decades. The knowledge gaps that limit our quantitative and mechanistic understanding of the human-coastal ocean nexus are identified, which is essential for science-based policy making. Recognizing lessons from past management practices, we advocate for a better, more efficient indexing system of coastal eutrophication and an advanced regional earth system modeling framework with optimal modules of human dimensions to facilitate the development and evaluation of effective policy and restoration actions.

In this study, we analysed the relationship between meteorological factors and the number of patients with coronavirus disease 2019 (COVID-19). The study period was from 12 April 2020 to 13 October 2020, and daily meteorological data and the daily number of patients with COVID-19 in each state of the United States were collected. Based on the number of COVID-19 patients in each state of the United States, we selected four states (California, Florida, New York, Texas) for analysis. One-way analysis of variance ( ANOVA), scatter plot analysis, correlation analysis and distributed lag nonlinear model (DLNM) analysis were used to analyse the relationship between meteorological factors and the number of patients with COVID-19. We found that the significant influencing factors of the number of COVID-19 cases differed among the four states. Specifically, the number of COVID-19 confirmed cases in California and New York was negatively correlated with AWMD (P < 0.01) and positively correlated with AQI, PM2.5 and TAVG (P < 0.01) but not significantly correlated with other factors. Florida was significantly correlated with TAVG (positive) (P < 0.01) but not significantly correlated with other factors. The number of COVID-19 cases in Texas was only significantly negatively associated with AWND (P < 0.01). The influence of temperature and PM2.5 on the spread of COVID-19 is not obvious. This study shows that when the wind speed was 2 m/s, it had a significant positive correlation with COVID-19 cases. The impact of meteorological factors on COVID-19 may be very complicated. It is necessary to further explore the relationship between meteorological factors and COVID-19. By exploring the influence of meteorological factors on COVID-19, we can help people to establish a more accurate early warning system.

A 1178 J near diffraction limited 527 nm laser is realized in a complete closed-loop adaptive optics (AO) controlled off-axis multi-pass amplification laser system. Generated from a fiber laser and amplified by the pre-amplifier and the main amplifier, a 1053 nm laser beam with the energy of 1900 J is obtained and converted into a 527 nm laser beam by a KDP crystal with 62% conversion efficiency, 1178 J and beam quality of 7.93 times the diffraction limit (DL). By using a complete closed-loop AO configuration, the static and dynamic wavefront distortions of the laser system are measured and compensated. After correction, the diameter of the circle enclosing 80% energy is improved remarkably from 7.93DL to 1.29DL. The focal spot is highly concentrated and the 1178 J, 527 nm near diffraction limited laser is achieved.

The aim of this article was to investigate the mechanism of appetite suppression induced by high-fat diets (HFD) in blunt snout bream (Megalobrama amblycephala). Fish (average initial weight 40·0 (sem 0·35) g) were fed diets with two fat levels (6 and 11 %) with four replicates. HFD feeding for 30 d could significantly increase the weight gain rate, but feeding for 60 d cannot. Food intake of M. amblycephala began to decline significantly in fish fed the HFD for 48 d. HFD feeding for 60 d significantly reduced the expression of neuropeptide Y and elevated the expression of cocaine- and amphetamine-regulated transcript (CART), actions both in favour of suppression of appetite. The activation of fatty acid sensing was partly responsible for the weakened appetite. In addition, inflammatory factors induced by the HFD may be involved in the regulation of appetite by increasing the secretion of leptin and then activating the mammalian target of rapamycin (mTOR). Lipopolysaccharide (LPS, 2·0 mg/kg of fish weight) was administered to induce inflammation, and sampling was performed after 3, 6, 9, 12, 18, 24 and 48 h of LPS injection. Within 6–24 h of LPS injection, the food intake and appetite of M. amblycephala decreased significantly, whereas the mRNA expression of leptin and mTOR increased significantly. Our results indicate that inflammatory cytokines may be the cause of appetite suppression in M. amblycephala fed a HFD.

By invoking some new ideas, we characterize Sobolev spaces Wα,p(ℝn) with the smoothness order α ∊ (0, 2] and p ∊ (max{1, 2n/(2α + n)},∞), via the Lusin area function and the Littlewood–Paley g*λ-function in terms of centred ball averages. We also show that the assumption p ∊ (max{1, 2n/(2α + n)},∞) is nearly sharp in the sense that these characterizations are no longer true when p ∊ (1, max{1, 2n/(2α + n)}). These characterizations provide a possible new way to introduce Sobolev spaces with smoothness order in (1, 2] on metric measure spaces.

The in situ synthesis of nickel-based composite coating reinforced with WC particle on mild steel has been investigated. Results show a planar crystal at the interface and some relatively coarse columnar dendrites on the side of the coating near the substrate. The synthesized WC particles homogenously distribute in the coating without cracks and pores. The maximum size, mean size, and volume fraction of the WC particle is 270 µm, 35 µm, and 71%, respectively. The microhardness value of the prepared coating can be up to a maximum of 755 HV2. The synthesized WC particles generally show a unique triangular prism shape, whose evolution rule and growth mechanism are investigated by Bravais–Friedel–Donnay–Harker theory. It is deduced that crystal structure and interface energy play important role in determining the shape of WC, which evolves from sphere to hexagonal prism and finally to triangular prism.

SG-III laser facility is now the largest laser driver for inertial confinement fusion research in China. The whole laser facility can deliver 180 kJ energy and 60 TW power ultraviolet laser onto target, with power balance better than 10%. We review the laser system and introduce the SG-III laser performance here.

Optics surface phase defects induced intensity modulation in high-power laser facility for inertial confinement fusion research is studied. Calculations and experiments reveal an exact mapping of the modulation patterns and the optics damage spot distributions from the surface phase defects. Origins are discussed during the processes of optics manufacturing and diagnostics, revealing potential improvements for future optics manufacturing techniques and diagnostic index, which is meaningful for fusion level laser facility construction and its operation safety.

In this study, Aluminum-based nanocomposites with hybrid reinforcements were successfully prepared by mechanical alloying, followed by consolidation using selective laser melting (SLM). The evolution of particle morphology and microstructural features of the milled powders at various milling times was studied. The results indicated that the milled powder particles experienced a coarsening stage at the early 5 h milling and followed by a continuous refinement during 5–20 h milling. After 20 h of milling, the original coarse needle-like Al3.21Si0.47 evolved into nanometer/submicrometer-sized spherical Al3.21Si0.47. Meanwhile, both fine Al3.21Si0.47 and ex-situ nanoscale TiN particles distributed uniformly within the Al matrix. By SLM processing of the 20-h powder, a near fully dense part with a uniform microstructure consisting of circularly dispersed and submicrometer-sized reinforcement particles embedded in α-Al matrix was obtained. The Vickers hardness and coefficient of friction of the SLM-processed part reached 178 HV0.1 and 0.38, respectively.

In this study, scanning electron microscope, electron backscatter diffraction, and transmission electron microscope have been used to investigate the microstructure evolution of Cu–0.2Mg alloy during continuous extrusion in mass production. The continuous extrusion could change the size and orientation of as-cast crystallite grains of the alloy. Hardness increased gently in upsetting zone and dropped sharply in adhesion zone. Hardness reached the maximum value in right-angle bending zone; and it decreased rapidly in extending extrusion zone. Upsetting zone was mainly composed of cell blocks and microbands, and adhesion zone mainly consisted of discontinuous recrystallize grain. Shear band and subgrains were formed in right-angle bending zone due to polygonization during shear deformation. In extending extrusion zone and extrusion rod zone, recrystallize microstructures were predominant.