This paper provides an overview of the current status of ultrafast and ultra-intense lasers with peak powers exceeding 100 TW and examines the research activities in high-energy-density physics within China. Currently, 10 high-intensity lasers with powers over 100 TW are operational, and about 10 additional lasers are being constructed at various institutes and universities. These facilities operate either independently or are combined with one another, thereby offering substantial support for both Chinese and international research and development efforts in high-energy-density physics.

The laboratory generation and diagnosis of uniform near-critical-density (NCD) plasmas play critical roles in various studies and applications, such as fusion science, high energy density physics, astrophysics as well as relativistic electron beam generation. Here we successfully generated the quasistatic NCD plasma sample by heating a low-density tri-cellulose acetate (TCA) foam with the high-power-laser-driven hohlraum radiation. The temperature of the hohlraum is determined to be 20 eV by analyzing the spectra obtained with the transmission grating spectrometer. The single-order diffraction grating was employed to eliminate the high-order disturbance. The temperature of the heated foam is determined to be T = 16.8 ± 1.1 eV by analyzing the high-resolution spectra obtained with a flat-field grating spectrometer. The electron density of the heated foam is about $N_e=4.0\pm 0.3\times {10}^{20}{\text{cm}}^{-3}$ under the reasonable assumption of constant mass density.

High-resolution X-ray flash radiography of Ti characteristic lines with a multilayer Kirkpatrick–Baez microscope was developed on the Shenguang-II (SG-II) Update laser facility. The microscope uses an optimized multilayer design of Co/C and W/C stacks to obtain a high reflection efficiency of the Ti characteristic lines while meeting the precise alignment requirement at the Cu Kα line. The alignment method based on dual simulated balls was proposed herein, which simultaneously realizes an accurate indication of the center field of view and the backlighter position. The optical design, multilayer coatings, and alignment method of the microscope and the experimental result of Ti flash radiography of the Au-coned CH shell target on the SG-II Update are described.

In inertial confinement fusion experiments that involve short-laser pulses such as fast ignition (FI), diagnosis of neutrons is usually very challenging because high-intensity γ rays generated by short-laser pulses would mask the much weaker neutron signal. In this paper, fast-response scintillators with low afterglow and gated microchannel plate photomultiplier tubes are combined to build neutron time-of-flight (nTOF) spectrometers for such experiments. Direct-drive implosion experiments of deuterium-gas-filled capsules were performed at the Shenguang-II Upgrade (SG-II-UP) laser facility to study the compressed fuel areal density (〈ρR〉) and evaluate the performance of such nTOF diagnostics. Two newly developed quenched liquid scintillator detectors and a gated ultrafast plastic scintillator detector were used to measure the secondary DT neutrons and primary DD neutrons, respectively. The secondary neutron signals were clearly discriminated from the γ rays from (n, γ) reactions, and the compressed fuel areal density obtained with the yield-ratio method agrees well with the simulations. Additionally, a small scintillator decay tail and a clear DD neutron signal were observed in an integrated FI experiment as a result of the low afterglow of the oxygen-quenched liquid scintillator.

Muons produced by a short pulse laser can serve as a new type of muon source having potential advantages of high intensity, small source emittance, short pulse duration and low cost. To validate it in experiments, a suitable muon diagnostics system is needed since high muon flux generated by a short pulse laser shot is always accompanied by high radiation background, which is quite different from cases in general muon researches. A detection system is proposed to distinguish muon signals from radiation background by measuring the muon lifetime. It is based on the scintillator detector with water and lead shields, in which water is used to adjust energies of muons stopped in the scintillator and lead to against radiation background. A Geant4 simulation on the performance of the detection system shows that efficiency up to 52% could be arrived for low-energy muons around 200 MeV and this efficiency decreases to 14% for high-energy muons above 1000 MeV. The simulation also shows that the muon lifetime can be derived properly by measuring attenuation of the scintilla light of electrons from muon decays inside the scintillator detector.

We investigate the influence of the initial size of the proton layer on proton acceleration in the interaction of high intensity laser pulses with double-layer targets by using two-dimensional particle-in-cell code. We discuss the influence of proton layer initial sizes on the cut-off energy, energy spread, and divergence angle of proton beam. It is found that Coulomb explosion plays an important role on the proton cut-off energy. This causes the cut-off energy to increase for increasing proton layer thickness, at the expense of energy spread. The proton divergence angle reaches a peak value and then falls again with increasing the width. Proton divergence angle grows with target thickness. It is found that there is an optimal thickness to obtain the narrowest energy spread, which may provide an effective method (change the size of proton layer) to obtain high quality proton beams. This work may serve to improve the understanding of sheath field proton acceleration.

In fast ignition of inertial confinement fusion, hot electron beam is considered to be an appropriate energy source for ignition. However, hot electrons are divergent as they are transporting in over-dense plasma. So collimating the hot electrons becomes one of the most important issues in fast ignition. A method to collimate hot electron beam by external magnetic field is proposed in this paper. The external field can be generated by compressing a seed magnetic field at the stage of laser-driven implosion. This method is confirmed by particle-in-cell simulations. The results show that hot electrons are well collimated by external magnetic field from magnetic-flux compression.

High-order interpolation algorithms for charge conservation in Particle-in-Cell (PIC) simulations are presented. The methods are valid for the case that a particle trajectory is a zigzag line. The second-order and third-order algorithms which can be applied to any even-order and odd-order are discussed in this paper, respectively. Several test simulations are performed to demonstrate their validity in two-dimensional PIC code. Compared with the simulation results of one-order, high-order algorithms have advantages in computation precision and enlarging the grid scales which reduces the CPU time.

The laser-driven acceleration of proton beams from a double-layer cone target, comprised of a cone shaped high-Z material target with a low density proton layer, is investigated via two-dimensional fully relativistic electro-magnetic particle-in-cell simulations. The dependence of the inside diameter (ID) of the tip size of a double-layer cone target on proton beam characteristics is demonstrated. Our results show that the peak energy of proton beams significantly increases and the divergence angle decreases with decreasing ID size. This can be explained by the combined effects of a stronger laser field that is focused inside the cone target and a larger laser interaction area by reducing the ID size.

An advanced cone-nanolayer target with nanolayers on both inside and outside of the hollow-cone tip is proposed. Two-dimensional particle-in-cell simulations show that laser interaction with such cone-nanolayer targets can efficiently produce fast electron beams with manageable spotsize, and the beams can propagate for a relatively long distance in the vacuum beyond the cone tip.

Laser plasma experiments, which demonstrated the single order diffraction property of spectroscopic photon sieve (a novel single-order diffraction grating), were performed on the SILEX-I femto-second laser facility. High-intensity laser radiation was focused onto a Cu target to generate plasma. The spectra of soft X-ray from copper plasmas have been measured with spectroscopic photon sieve based spectrograph. The results show that the spectroscopic photon sieve is able to provide soft X-ray spectrum free from higher-order diffraction components. The measured spectra obtained with such a spectroscopic photon sieve need no unfolding process to extract higher-order diffraction interference.

For high-energy gain of electron acceleration by a laser wakefield, a stable or guiding propagation of an ultrashort, high-intensity laser pulse in a gas-target plasma is of fundamental importance. Preliminary experiments were carried out for the propagation of 30-fs, ~100-TW laser pulses of intensities ~1019W/cm2 in plasma of densities ~1019/cm3. Self-guiding length of nearly 1.4 mm was observed in a gas jet and 15 mm in a hydrogen-filled capillary. Fluid-dynamics simulations are used to characterize the two types of gas targets. Particle-in-cell simulations indicate that in the plasma, after the pulse's evolution of self-focusing and over-focusing, the high-intensity pulse could be stably guided with a beam radius close to the plasma wavelength. At lower plasma densities, a preformed plasma channel of a parabolic density profile matched to the laser spot size would be efficient for guiding the pulse.

In order to improve the total laser-proton energy conversion efficiency, a nanobrush target is proposed for proton acceleration and investigated by two-dimensional particle-in-cell simulation. The simulation results show that the nanobrush target significantly enhances the energy and number of hot electrons through the target rear side. Compared with plain target, the sheath field on the rear surface is increased near 100% and the total laser-proton energy conversion efficiency is prompted more than 70%. Furthermore, the proton divergence angle is less than 30° by using nanobrush target. The proposed target may serve as a new method to increase the energy conversion efficiency from laser to protons.

A scheme capable of enhancing the energy of monoenergetic protons in high intensity laser-plasma interactions is proposed and demonstrated by two dimensional particle-in-cell simulations. The focusing of laser light pulse and the guiding of surface current via the high Z material cone-shaped substrate increase the temperature of hot electrons, which are responsible for the electrostatic field accelerating protons. Moreover, the sub-micron proton layer coated on the cone-shaped substrate makes the total proton beam experience the same accelerating field, thus the monochromaticity is maintained. Compared to the normal film double layer target, the energy of monoenergetic proton beams can be improved about three times.