An optical spectrometer system based on 60 channels of fibers has been designed and employed to diagnose light emissions from laser–plasma interactions. The 60 fiber collectors cover an integrated solid angle of $\pi$, enabling the measurement of global energy losses in a symmetrical configuration. A detecting spectral range from ultraviolet to near-infrared, with angular distribution, allows for the understanding of the physical mechanisms involving various plasma modes. Experimental measurements of scattered lights from a conical implosion driven by high-energy nanosecond laser beams at the Shenguang-II Upgrade facility have been demonstrated, serving as reliable diagnostics to characterize laser absorption and energy losses from laser–plasma instabilities. This compact diagnostic system can provide comprehensive insights into laser energy coupling in direct-drive inertial confinement fusion research, which are essential for studying the driving asymmetry and improving the implosion efficiencies.

A multifunctional optical diagnostic system, which includes an interferometer, a refractometer and a multi-frame shadowgraph, has been developed at the Shenguang-II upgrade laser facility to characterize underdense plasmas in experiments of the double-cone ignition scheme of inertial confinement fusion. The system employs a 266 nm laser as the probe to minimize the refraction effect and allows for flexible switching among three modes of the interferometer, refractometer and multi-frame shadowgraph. The multifunctional module comprises a pair of beam splitters that attenuate the laser, shield stray light and configure the multi-frame and interferometric modules. By adjusting the distance and angle between the beam splitters, the system can be easily adjusted and switched between the modes. Diagnostic results demonstrate that the interferometer can reconstruct electron density below 1019 cm–3, while the refractometer can diagnose density approximately up to 1020 cm–3. The multi-frame shadowgraph is used to qualitatively characterize the temporal evolution of plasmas in the cases in which the interferometer and refractometer become ineffective.

The associations between obesity and liver diseases are complex and diverse. To explore the causal relationships between obesity and liver diseases, we applied two-sample Mendelian randomisation (MR) and multivariable MR analysis. The data of exposures (BMI and WHRadjBMI) and outcomes (liver diseases and liver function biomarker) were obtained from the open genome-wide association study database. A two-sample MR study revealed that the genetically predicted BMI and WHRadjBMI were associated with non-alcoholic fatty liver disease, liver fibrosis and autoimmune hepatitis. Obesity was not associated with primary biliary cholangitis, liver failure, liver cell carcinoma, viral hepatitis and secondary malignant neoplasm of liver. A higher WHRadjBMI was associated with higher levels of biomarkers of lipid accumulation and metabolic disorders. These findings indicated independent causal roles of obesity in non-alcoholic fatty liver disease, liver fibrosis and impaired liver metabolic function rather than in viral or autoimmune liver disease.

Light stimulation can realise the remote control of the deformation of the specific position of 4D printing structure. Shape-memory polymer–carbon nanotube (CNT) composite materials, with outstanding near-infrared photothermal conversion rate and shape-memory ability, is one type of the most popular light responsive smart materials. However, current studies focused on the photothermal effect and shape-memory applications of light-responsive shape-memory polymer composite (SMPC) sheet structures, and there is no research on the photothermal effect in the depth direction of light-responsive SMPC three-dimensional structures. Here, we prepared a UV curable, mechanically robust, and highly deformable shape-memory polymer (IBBA) as the matrix of light responsive SMPC. CNTs were added as photothermal conversion materials. We explore the photothermal effect of near-infrared laser on the surface and depth of IBBA–CNT composites cube. Shape-memory experiments show that different folded shapes can be obtained by selective near-infrared laser programming. Selective near-infrared laser programming three-dimensional movable type plate shows a programming application in depth direction of three-dimensional light-responsive intelligent structure. This research extends the application of near-infrared laser in 4D printing to the depth direction of intelligent structures, which will bring more complex and interesting 4D printing structures in the future.

In the double-cone ignition scheme of inertial confinement fusion, the head-on collision of two compressed fuel jets from the cone-tips forms an isochoric plasma, which is then heated suddenly by a MeV relativistic electron beam produced by ultra-intense picosecond laser pulses. This fast-heating process was studied experimentally at the Shenguang II upgrade laser facility. By observing temporal-resolved X-ray emission and the spatial-resolved X-ray spectrum, the colliding process and heating process are carefully studied. The colliding plasma was imaged to have dimensions of approximately 86 μm in the implosion direction and approximately 120 μm in the heating direction. By comparing the simulated plasma X-ray spectrum with experimental data, the electron temperature of the heated plasma was found to rapidly increase to 600 ± 50 eV, almost doubling the temperature achieved before the heating laser incidence.

The measurement of X-ray continuous emission from laser-driven plasma was achieved through multiple monochromatic imaging utilizing a multilayer mirror array. This methodology was exemplified by the development of an eight-channel X-ray imaging system, capable of operating in the energy range of several keV with a spatial resolution of approximately 3 μm. By integrating this system with a streak camera, the temperature and trajectory of imploding capsules were successfully measured at the kJ-class Shenguang III prototype laser facility. This approach provides a synchronous diagnostic method for the spatial, temporal and spectral analysis of laser-driven plasma, characterized by its high efficiency and resolution.

Double-cone ignition [Zhang et al., Phil. Trans. R. Soc. A 378, 20200015 (2020)] was proposed recently as a novel path for direct-drive inertial confinement fusion using high-power lasers. In this scheme, plasma jets with both high density and high velocity are required for collisions. Here we report preliminary experimental results obtained at the Shenguang-II upgrade laser facility, employing a CHCl shell in a gold cone irradiated with a two-ramp laser pulse. The CHCl shell was pre-compressed by the first laser ramp to a density of 3.75 g/cm3 along the isentropic path. Subsequently, the target was further compressed and accelerated by the second laser ramp in the cone. According to the simulations, the plasma jet reached a density of up to 15 g/cm3, while measurements indicated a velocity of 126.8 ± 17.1 km/s. The good agreements between experimental data and simulations are documented.

The silkworm Bombyx mori (Lepidoptera: Bombycidae) is a lepidopteran model insect of great economic importance. The parasitoid Exorista sorbillans (Diptera, Tachinidae) is the major pest of B. mori and also a promising candidate for biological control. However, the molecular interactions between hosts and dipteran parasitoids have only partially been studied. Gene expression analysis by reverse-transcription quantitative real-time polymerase chain reaction (RT-qPCR) is indispensable to characterise their interactions. Accurate normalisation of RT-qPCR-based gene expression requires the use of reference genes that are constantly expressed irrespective of experimental conditions. In this study, the expression stability of 13 traditionally used reference genes was estimated by five statistical algorithms (ΔCt, geNorm, Normfinder, BestKeeper, and RefFinder) to determine the best reference genes for gene expression studies in different tissues of B. mori under E. sorbillans parasitism. Specifically, TATA-box-binding protein was the best reference gene in epidermis and testis, while elongation factor 1α was the most stable gene in prothoracic gland and midgut. Elongation factor 1γ, ribosomal protein L3, actin A1, ribosomal protein L40, glyceraldehyde-3-phosphate dehydrogenase and eukaryotic translation initiation factor 4A were the most suitable genes in head, silk gland, fat body, haemolymph, Malpighian tubule and ovary, respectively. Our study offers a set of suitable reference genes for gene expression normalisation in B. mori under the parasitic stress of E. sorbillans, which will benefit the in-depth exploration of host-dipteran parasitoid interactions, and also provide insights for further improvements of B. mori resistance against parasitoids and biocontrol efficacy of dipteran parasitoids.

In this note, assuming the nonvanishing result of explicit theta correspondence for the symplectic–orthogonal dual pair over quaternion algebra $\mathbb {H}$, we show that, for metapletic–orthogonal dual pair over $\mathbb {R}$ and the symplectic–orthogonal dual pair over quaternion algebra $\mathbb {H}$, the theta correspondence is compatible with tempered condition by directly estimating the matrix coefficients, without using the classification theorem.

Straightplasma channels are widely used to guide relativistic intense laser pulses over several Rayleigh lengths for laser wakefield acceleration. Recently, a curved plasma channel with gradually varied curvature was suggested to guide a fresh intense laser pulse and merge it into a straight channel for staged wakefield acceleration [Phys. Rev. Lett. 120, 154801 (2018)]. In this work, we report the generation of such a curved plasma channel from a discharged capillary. Both longitudinal and transverse density distributions of the plasma inside the channel were diagnosed by analyzing the discharging spectroscopy. Effects of the gas-filling mode, back pressure and discharging voltage on the plasma density distribution inside the specially designed capillary are studied. Experiments show that a longitudinally uniform and transversely parabolic plasma channel with a maximum channel depth of 47.5 μm and length of 3 cm can be produced, which is temporally stable enough for laser guiding. Using such a plasma channel, a laser pulse with duration of 30 fs has been successfully guided along the channel with the propagation direction bent by 10.4°.

In the treatment of infertile patients with non-obstructive azoospermia (NOA) caused by the deletion of the azoospermia factor c region (AZFc) on the Y chromosome, synchronous and asynchronous surgical strategies are discussed. Clinical data from NOA patients with the AZFc deletion who underwent micro-TESE were analyzed retrospectively. The sperm retrieval rate (SRR) and sperm utilization rate of synchronous and asynchronous operation groups were followed up and compared. The fertilization rate, high-quality embryo rate, clinical pregnancy rate, abortion rate, and cumulative live birth rate of ICSI in patients with successful sperm retrieval were compared between the two groups. The two groups had sperm utilization rates of 98.9% (93/94) and 50.0% (14/28), respectively. The asynchronous group’s sperm consumption rates were much lower than those of the synchronous operation group. Fertilization rate, high-quality embryo rate, clinical pregnancy rate of fresh transfer cycle, abortion rate, and cumulative live birth rate of patients in the synchronous operation group with fresh sperm, and the asynchronous operation group with thawed sperm, respectively, were 30.6% vs 33.8%, 33.8% vs 40.7%, 40.0% vs 12.5%, 30.4% vs 7.1%. Between the two groups, there was no significant difference. This suggests that individuals with NOA caused by the AZFc deletion have a high possibility of successfully acquiring sperm using micro-TESE and ICSI to conceive their own offspring. Synchronous micro-TESE is recommended to improve sperm utilization rate and the cumulative live birth rate.

The sequential occurrence of three layers of smooth muscle layers (SML) in human embryos and fetus is not known. Here, we investigated the process of gut SML development in human embryos and fetuses and compared the morphology of SML in fetuses and neonates. The H&E, Masson trichrome staining, and Immunohistochemistry were conducted on 6–12 gestation week human embryos and fetuses and on normal neonatal intestine. We showed that no lumen was seen in 6–7th gestation week embryonic gut, neither gut wall nor SML was developed in this period. In 8–9th gestation week embryonic and fetal gut, primitive inner circular SML (IC-SML) was identified in a narrow and discontinuous gut lumen with some vacuoles. In 10th gestation week fetal gut, the outer longitudinal SML (OL-SML) in gut wall was clearly identifiable, both the inner and outer SML expressed α-SMA. In 11–12th gestation week fetal gut, in addition to the IC-SML and OL-SML, the muscularis mucosae started to develop as revealed by α-SMA immune-reactivity beneath the developing mucosal epithelial layer. Comparing with the gut of fetuses of 11–12th week of gestation, the muscularis mucosae, IC-SML, and OL-SML of neonatal intestine displayed different morphology, including branching into glands of lamina propria in mucosa and increased thickness. In conclusions, in the human developing gut between week-8 to week-12 of gestation, the IC-SML develops and forms at week-8, followed by the formation of OL-SML at week-10, and the muscularis mucosae develops and forms last at week-12.

The optimization of laser pulse shapes is of great importance and a major challenge for laser direct-drive implosions. In this paper, we propose an efficient intelligent method to perform laser pulse optimization via hydrodynamic simulations guided by the genetic algorithm and random forest algorithm. Compared to manual optimizations, the machine-learning guided method is able to efficiently improve the areal density by a factor of 63% and reduce the in-flight-aspect ratio by a factor of 30% at the same time. A relationship between the maximum areal density and ion temperature is also achieved by the analysis of the big simulation dataset. This design method has been successfully demonstrated by the 2021 summer double-cone ignition experiments conducted at the SG-II upgrade laser facility and has great prospects for the design of other inertial fusion experiments.

Taurine (Tau) has many profound physiological functions, but its role and molecular mechanism in muscle cells are still not fully understood. In this study, we investigated the role and underlying molecular mechanism of Tau on protein synthesis and proliferation of C2C12 myoblast cells. Cells were treated with Tau (0, 60, 120, 180 and 240 μM) for 24 h. Tau dose-dependently promoted protein synthesis, cell proliferation, mechanistic target of rapamycin protein (mTOR) phosphorylation and also AT-rich interaction domain 4B (ARID4B) expression, with the best stimulatory effects at 120 μM. LY 294002 treatment showed that Tau promoted ARID4B expression in a phosphoinositide 3-kinase (PI3K)-dependent manner. ARID4B knockdown (by small interfering RNA transfection for 24 h) prevented Tau from stimulating protein synthesis and cell proliferation, whereas ARID4B gene activation (using the CRISPR/dCas9 technology) had stimulatory effects. ARID4B knockdown abolished Tau signalling to mRNA expression and protein phosphorylation of mTOR, whereas ARID4B gene activation had stimulatory effects. Chromatin immunoprecipitation (ChIP)-PCR identified that all of ARID4B, H3K27ac and H3K27me3 bound to the −4368 to –4591 bp site in the mTOR promoter, and ChIP-quantitative PCR (qPCR) further detected that Tau stimulated ARID4B binding to this site. ARID4B knockdown or gene activation did not affect H3K27me3 binding to the mTOR promoter but decreased or increased H3K27ac binding, respectively. Furthermore, ARID4B knockdown abolished the stimulation of Tau on H3K27ac binding to the mTOR promoter. In summary, these data uncover that Tau promotes protein synthesis and proliferation of C2C12 myoblast cells through the PI3K-ARID4B-mTOR pathway, providing a deep understanding of how Tau regulates anabolism in muscle cells.

The aim of our study was to determine the distribution of hepatitis B virus (HBV) genotypes and subgenotypes in ethnic minorities in Yunnan province to provide evidence supporting the theoretical basis for hepatitis B prevention and control. We obtained serum samples and demographic data from 765 individuals reported by Yunnan province who had either acute or chronic HBV infection and were from one of 20 ethnic minority populations: Achang, Bai, Brown, Tibetan, Dai, Deang, Dulong, Hani, Hui, Jingpo, Lahu, Yi, Lisu Miao, Naxi, Nu, Pumi, Wa, Yao, or Zhuang people. We sequenced the HBV DNA and determined the genotypes and subgenotypes of the isolated HBVs. We mapped the genotype and subgenotype distribution by ethnic minority population and conducted descriptive analyses. There were four genotypes among the 20 ethnic groups: genotype B (21.3% of samples), C (76.6%), D (1.8%) and I (0.3%). The most common subgenotype was C1. There were no genotype differences by gender (P = 0.954) or age (P = 0.274), but there were differences by region (P < 0.001). There were differences in genotype distribution (P < 0.001) and subgenotype distribution (P = 0.011) by ethnic group. Genotype D was most prominent in Tibet and most HBV isolates were C/D recombinant viruses. The only two genotype I virus isolates were in Zhuang people. Susceptibility and geographic patterns may influence HBV prevalence in different ethnic populations, but additional research is needed for such a determination.