Accurate channel characterization is extremely helpful in channel estimation, channel coding, and many other parts of communication system design and can effectively reduce overhead. Ray tracing (RT) shows accurate channel reconstruction for specific maps, but the multipath propagation in indoor scenes is far more complex than in outdoor scenes leading to a challenge for RT. This work presents and validates an RT tool for a massive multiple-input multiple-output (MIMO) system in the millimeter-wave frequency bands with the associated channel beamforming algorithm and provides ideas for channel estimation algorithm in subsequent MIMO systems. The impact of the order of interactions, e.g. reflections and diffractions on the channel impulse response reconstruction are analyzed in the RT simulation. The comparison between RT simulated and measured results shows a reasonable level of agreement. The presented RT tool that can provide complete and accurate channel information is of high value for the design of reliable communication systems.

L-aspartic acid was intercalated into layered double hydroxides by coprecipitation. Two types of well crystallized material were obtained and were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetry, differential thermal analysis and polarimetry. Schematic models of two intercalation structures with different basal spacings are given. It is proved that the optical activity of L-aspartic acid is retained during and after the intercalation process.

Burn patients are at high risk of central line–associated bloodstream infection (CLABSI). However, the diagnosis of such infections is complex, resource-intensive, and often delayed. This study aimed to investigate the epidemiology of CLABSI and develop a prediction model for the infection in burn patients. The study analysed the infection profiles, clinical epidemiology, and central venous catheter (CVC) management of patients in a large burn centre in China from January 2018 to December 2021. In total, 222 burn patients with a cumulative 630 CVCs and 5,431 line-days were included. The CLABSI rate was 23.02 CVCs per 1000 line-days. The three most common bacterial species were Acinetobacter baumannii, Staphylococcus aureus, and Pseudomonas aeruginosa; 76.09% of isolates were multidrug resistant. Compared with a non-CLABSI cohort, CLABSI patients were significantly older, with more severe burns, more CVC insertion times, and longer total line-days, as well as higher mortality. Regression analysis found longer line-days, more catheterisation times, and higher burn wounds index to be independent risk factors for CLABSI. A novel nomogram based on three risk factors was constructed with an area under the receiver operating characteristic curve (AUROC) value of 0.84 (95% CI: 0.782–0.898) with a mean absolute error of calibration curve of 0.023. The nomogram showed excellent predictive ability and clinical applicability, and provided a simple, practical, and quantitative strategy to predict CLABSI in burn patients.

Nitrogen fertilizer and water are two major nutrients required for the optimal production of rice worldwide. The utilization of different irrigation techniques to save water and fertigation to maximize rice production has been the main focus. A field experiment was conducted to explore the responses of 16 rice varieties to different irrigation and nitrogen fertilizer regimes. Two nitrogen treatments, 270 kg ha−1 and 225 kg ha−1 (urea N ≥ 46.4%), and two irrigation regimes, 8.7 t ha−1 and 5.22 t ha−1, were applied three times. Plant height and the soil and plant analyser development (SPAD) values were measured throughout the growth period. The total yield and quality characteristics of the rice varieties were also determined. Based on the yield, the 16 rice varieties were divided into three groups: high yield (I), middle yield (II) and low yield (III) using cluster analysis. A positive correlation was found between the growth period and yield of these 16 rice varieties. In the water-deficient regime, the growth period of the 16 varieties was reduced by 1.68–2.93%. Furthermore, nitrogen- and water-deficient regimes had significant effects on the polishing rate, protein content and taste values of all varieties. At maturity stage under these regimes, plant height and chlorophyll SPAD values were decreased by 1.25–6.05% and 1.60–31.48%, respectively. Deficient nitrogen fertilization, along with appropriate irrigation, is an effective method for the efficient utilization of irrigation and fertilizer resources in rice-growing areas.

Coastal eutrophication and hypoxia remain a persistent environmental crisis despite the great efforts to reduce nutrient loading and mitigate associated environmental damages. Symptoms of this crisis have appeared to spread rapidly, reaching developing countries in Asia with emergences in Southern America and Africa. The pace of changes and the underlying drivers remain not so clear. To address the gap, we review the up-to-date status and mechanisms of eutrophication and hypoxia in global coastal oceans, upon which we examine the trajectories of changes over the 40 years or longer in six model coastal systems with varying socio-economic development statuses and different levels and histories of eutrophication. Although these coastal systems share common features of eutrophication, site-specific characteristics are also substantial, depending on the regional environmental setting and level of social-economic development along with policy implementation and management. Nevertheless, ecosystem recovery generally needs greater reduction in pressures compared to that initiated degradation and becomes less feasible to achieve past norms with a longer time anthropogenic pressures on the ecosystems. While the qualitative causality between drivers and consequences is well established, quantitative attribution of these drivers to eutrophication and hypoxia remains difficult especially when we consider the social economic drivers because the changes in coastal ecosystems are subject to multiple influences and the cause–effect relationship is often non-linear. Such relationships are further complicated by climate changes that have been accelerating over the past few decades. The knowledge gaps that limit our quantitative and mechanistic understanding of the human-coastal ocean nexus are identified, which is essential for science-based policy making. Recognizing lessons from past management practices, we advocate for a better, more efficient indexing system of coastal eutrophication and an advanced regional earth system modeling framework with optimal modules of human dimensions to facilitate the development and evaluation of effective policy and restoration actions.

This study presents a dual-circularly polarized (CP) Fabry–Pérot (FP) antenna, employing a novel receiver–transmitter (RT) metasurface (MS). The RT-MS unit cell consists of two identical neighboring substrates, with a three-layer metal coating printed on their surfaces. The bottom patch is adopted as a receiver to transfer electromagnetic waves to the top-corner cut patch, passing through the coupling cross-slot sandwiched in the middle. The RT-MS has high reflectivity to achieve a high gain. Through energy and a cross-slot, high aperture efficiency can be realized. A conventional corner cut patch can excite a CP mode of equal magnitude and a 90° phase difference. The RT-MS is arranged in 12 × 12 unit cells and used as a superstrate for a dual-CP antenna. Two orthogonally etched slots fed by two branch-matched orthogonally arranged feed lines are used as feeders to produce perpendicular linearly polarized waves. To enhance the bandwidth and improve the gain, double identical stack substrate patches are placed at the top side of the slot with no air gap, for a wide impedance band and high gain. Two wide CP bands, left-hand circular polarization and right-hand circular polarization, of 12.21–13.1 GHz (7.03%) and 12.35–13.1 GHz (5.89%), respectively, have maximum high gains of 16.5 and 15.97 dBic at 12.58 and 12.7 GHz, respectively, with a compact size of 2.6λ0 × 2.6λ0, suggesting better properties than recent antennas. The aperture efficiency can reach 63.2%. Thus, the RT-MS-based FP antenna is a good candidate for commercial and military communication systems.

Comprehensive screening of rice (Oryza sativa L. subsp. japonica Kato) germplasm resources with different nitrogen (N) efficiency levels is effective for improving N use efficiency (NUE) while reducing pollution and providing high quality, yield, and efficiency agriculture. We investigated 14 indices of 38 varieties under three N application levels to assess differences among genotypes. Rice varieties were classified for screening and identifying N efficient. Descriptive statistical analysis results indicated significant differences in relative yield, and also in NUE indices (agronomic utilization rate and partial productivity of N fertilizer). The genotype main effects and genotype–environment interaction effects (GGE) biplot analysis was used to evaluate suitable varieties, compare the stable and high yield capabilities of different varieties, find the ideal variety, and describe the correlation, discrimination and representativeness of the indices under different N application levels. Descriptive statistical, discrimitiveness and representativeness and factor analysis were used to select indices, in which the panicle number per plant and soil and plant analyzer development (SPAD) value were the key indices for evaluation and identification. Heatmap and hierarchical cluster analysis based on the average value of evaluation indices, and scatter plot based on the comprehensive value of N efficiency (P) according to formula showed that all varieties could be divided into five types under different N treatments. Our findings work toward developing N efficient rice varieties to improve NUE, reduce N fertilizer application and thus N waste, consequently mitigating the effects of rice production on the environment to ensure food security and sustainable agricultural development.

Flat products of carbon nanotubes (CNTs) reinforced Al matrix composites were fabricated using flake powder metallurgy via shift-speed ball milling and hot-rolling. The evolution of CNTs during preparation and the final distribution in the Al matrix were investigated, and the effect of CNT content on mechanical properties were discussed. Due to the combined effect of uniform dispersion of CNTs, structural integrity, interfacial bonding and directional alignment, the balance between high strength and ductility was successfully achieved in the annealed rolled composites with 1.5 wt% CNT addition, with the value of 382.6 MPa in tensile strength and 9.8% in fracture ductility. The load transfer strengthening was the main mechanism of the strength enhancement with CNTs addition. In addition, a strong rotated cube {001}〈110〉 texture was found in the final flat product of rolled composites. This study provides an effective route to produce and improve the mechanical properties of CNT/Al flat products.

Sn–Sb alloy is an ideal candidate for lead-free solder; however, its performance has been inferior to that of Sn–Pb alloy. Here, the authors used ab initio molecular dynamics simulation to investigate the interatomic interaction in Sn–Sb-based lead-free solders. By calculating the electron density distribution, bond population, and partial density of states, the authors found that the Sn–Sb bonds are a mixture of nonlocalized metal and localized covalent bonds. The covalent bond between Sn and Sb is easy to break at higher temperatures, so Sn–Sb (6.4 wt%) had better fluidity than other studied Sn–Sb alloys. Furthermore, adding Cu or Ag into Sn–Sb alloys can decrease the strength of covalent bonds and stabilize the metal bonds, which improves the metallicity and wettability of the Sn–Sb–Cu and Sn–Sb–Cu–Ag systems when the temperature increases. These results are all in good agreement with experimental findings and have significant value for the development of new solder alloys.

We construct a nonlinear monotone finite volume scheme for three-dimensional diffusion equation on tetrahedral meshes. Since it is crucial important to eliminate the vertex unknowns in the construction of the scheme, we present a new efficient eliminating method. The scheme has only cell-centered unknowns and can deal with discontinuous or tensor diffusion coefficient problems on distorted meshes rigorously. The numerical results illustrate that the resulting scheme can preserve positivity on distorted tetrahedral meshes, and also show that our scheme appears to be approximate second-order accuracy for solution.

The extension of diamond scheme for diffusion equation to three dimensions is presented. The discrete normal flux is constructed by a linear combination of the directional flux along the line connecting cell-centers and the tangent flux along the cell-faces. In addition, it treats material discontinuities by a new iterative method. The stability and first-order convergence of the method is proved on distorted meshes. The numerical results illustrate that the method appears to be approximate second-order accuracy for solution.

In this work, we investigated the influence of N-polar wet etching on the properties of nitride-based hexagonal pyramids array (HPA) vertical-injection light emitting diodes (V-LEDs). The cathodeluminescence images showed the randomly distribution of hexagonal pyramids with isolated active regions. The transmission electron microscopy images demonstrated the reduced density of threading dislocations. The IQE was estimated by temperature dependence of photoluminescence, which showed 30% increase for HPA V-LEDs compared with broad area (BA) V-LEDs. The improved extraction efficiency was verified by finite difference time domain simulation, which was 20% higher than that of roughened BA V-LEDs. The electrical properties of HPA V-LEDs were measured by conductive atomic force microscopy (CAFM) measurements. HPA V-LEDs exhibited much lower leakage current due to the improved crystal quality.

Twenty-one trilobite species belonging to 18 genera are described from the measured section of the Pagoda Formation (Caradoc) at Donggongsi, Zunyi, Guizhou Province, China. The fauna is numerically dominated by the hammatocnemid Ovalocephalus and remopleuridid Dislobosaspis (gen. nov.), and the Ovalocephalus–Dislobosaspis Biofacies is established to represent a shallow outer-shelf trilobite association. The lithofacies and trilobite taphonomy indicate a comparatively quiet and undisturbed depositional environment. Trilobites exhibit strong SE Asian affinities and formed part of the Peri-Gondwana fauna. They are closely related to those of South- Central Europe but show some Baltoscandian aspects.