Dinaric up-thrusts in the Pliocene evolution of the Central Apennines thrust belt of Italy: the Montagna dei Fiori structure

Abstract Several orogenic belts exhibit regional-scale anticlines characterized by prominent faults in their crestal/forelimb zone. These faults are also a common feature in the Neogene fold-and-thrust belt of the Apennines, where they have been contrastingly interpreted as younger-on-older thrust faults, large-scale strike-slip faults, and pre- or syn-thrusting normal faults. In this study, we analysed a NW–SE-trending fault (Montagna dei Fiori Fault) that affects the hinge-zone/forelimb of the Montagna dei Fiori Anticline. This fold is the outermost exposed contractional structure within the Pliocene–Quaternary antiformal stack of the outer Central Apennines. The integration of stratigraphic and structural data collected during a field geological survey enabled us to reconstruct a multiphase reactivation and deformation along the Montagna dei Fiori Fault. From the novel field data, a different interpretation for the evolution of the Montagna dei Fiori Fault is proposed. The fault originated as a Late Cretaceous – middle Miocene, NE-dipping, Dinaric up-thrust and was later reactivated, displaced and rotated during Pliocene Apennine thrusting and related folding, until assuming a present-day SW-dipping attitude with an apparent normal fault character. This newly proposed Dinaric origin of the Montagna dei Fiori structure is compared with an analogous subsurface example of a Palaeogene–Quaternary structure imaged by seismic reflection profile in the Adriatic foreland. The outcome of this combined field and subsurface investigation provides new elements to unravel the complex evolution of the Apennine thrust belt that developed at the expense of a previously deformed foreland, ahead of the advancing Dinaric chain.

In the outer zones of orogenic belts, precursor structures developed during the tectonic history of a foreland domain that has experienced repeated events of extension and contraction are usually difficult to decipher since they are strongly overprinted by the progressive incorporation of the foreland into the thrust belt. As a consequence, the unambiguous interpretation of the regional hinterland-dipping faults within the thrust-related anticlines as pre-, syn-or post-thrusting remains challenging, particularly when absolute timing constraints are lacking as a result of the incompleteness of the stratigraphic record.
In the outer sector of the Central Apennine foothills, the Montagna dei Fiori Anticline is a NNW-SSE-trending thrustrelated fold characterized by an overturned forelimb, developed during lower Pliocene foreland thrusting (Calamita et al. 1994;Tozer et al. 2006) (Fig. 1). A hinterland-and SW-dipping regional fault (i.e. the Montagna dei Fiori Fault or MdFF), sub-parallel to the anticline axial trend, characterizes the hinge-forelimb zone of the fold. Various interpretations have been proposed for the MdFF, with either a Miocene pre-thrusting normal fault related to foreland flexural processes (Calamita et al. 1998;Scisciani et al. 2001aScisciani et al. , b, 2002Mazzoli et al. 2002) or a Pliocene-Quaternary syn-thrusting normal fault (Ghisetti & Vezzani, 2000;Storti et al. 2018).
This study provides a reappraisal of the structural-geological development of the MdFF by integrating original stratigraphic and structural data and observations with extensive previously published geological and structural information. The newly acquired dataset allows the development of an alternative prethrusting structural model for the Montagna dei Fiori structure and the proposal of a new interpretation of the tectonic origin of the MdFF. The newly proposed pre-Apennines model for the Montagna dei Fiori structure, involved in the frontal Pliocene-Quaternary antiformal stack of the Central Apennines, is compared with subsurface analogues that can be found among the Palaeogene-Quaternary structures of the Mid-Adriatic ridge in the Adriatic foreland (Fig. 2).

Regional geological framework
The Apennines of Italy are a fold-and-thrust belt developed during the Neogene-Quaternary time interval in response to the convergence between Africa and Europe and following the closure of the Mesozoic Tethys Ocean during the Alpine Orogeny (e.g. Carminati & Doglioni, 2012). The orogeny affected Triassic-Miocene sedimentary successions deposited in different carbonate-dominated domains developed along the Mesozoic Adria continental margin (Ciarapica & Passeri, 2002). In addition, orogenesis was accompanied by the progressive development of foredeep and piggyback basins migrating towards the foreland from the innermost Oligocenelower Miocene basin to the present-day Pliocene-Quaternary Adriatic Basin (Boccaletti et al. 1990). The geometry of the Apennine thrust belt is arranged in two NE-to SE-verging arcsthe Northern and Southern Apennineswhich are connected through the Central Apennine thrust system via two regional-scale oblique thrust ramps Satolli et al. 2014).
The Central-Northern Apennines foothills are characterized by fold-and-thrust structures involving a sedimentary cover composed of pre-orogenic Mesozoic-Palaeogene carbonates and Neogene syn-orogenic, siliciclastic, foredeep deposits. The ENE-directed outer Apennine thrust system is stacked onto the undeformed Adriatic plate, representing a common foreland domain shared with the WSW-directed Dinarides thrust system (Fig. 1). In the Apennine-Adriatic thrust-belt-foreland system, faults developed prior to Apennine thrusting that recorded the structural and stratigraphic signature of pre-orogenic extension are widely recognized. These faults record a polyphase tectonic history, with repeated events of basin formation associated with normal faulting (i.e. Jurassic rifting and Cretaceous-Tertiary foreland extension), and were later variously reworked by the contractional deformation during the Upper Cretaceous -Palaeogene Dinaric and Pliocene-Quaternary Apennine thrust belt development (e.g. Tavarnelli & Peacock, 1999;Scisciani et al. 2001aScisciani et al. , b, 2002Scisciani et al. , 2014Di Domenica et al. 2012Cardello & Doglioni, 2014;Pace et al. 2017Pace et al. , 2020Calamita et al. 2018).
In the inner zone of the Apennine thrust belt, Quaternary and still-active post-orogenic normal faults dissect the axial zone of the Apennine mountain ridge, whereas in the Apennine foreland, Pliocene-Quaternary thrusts and folds are buried below the synorogenic sediments beneath the Po Plain and in the Adriatic Basin (e.g. Doglioni, 1991;Barchi et al. 1998;Finetti et al. 2001). The NW-SE-oriented Mid-Adriatic Ridge, developed in the central zone of the Adriatic foreland, represents a polyphase deformed area characterized by up-thrust faults (i.e. basement-rooted, convex-upwards, high-angle reverse faults developing in deformed forelands, sensu Prucha et al. 1965;Sales, 1968) and thrust-related folds resulting from the Palaeogene (i.e. Dinaric phase; Figs 1, 2) and Pliocene-Quaternary (i.e. Apennine phase) reverse/transpressional reactivation of rift-inherited Mesozoic normal faults (Scisciani & Calamita, 2009;Pace et al. 2015b).
The Neogene arcuate thrusts of the Olevano-Antrodoco-Mt Sibillini and Gran Sasso represent the Umbria-Marche and Latium-Abruzzi Apennine mountain fronts, respectively. In the footwall of these thrust fronts, the Messinian siliciclastic deposits of the Laga Formation are widely exposed within the former foreland basin (Bigi et al. 2011). Contractional structures occur within the Laga Basin and consist of two main double-plunging thrustrelated anticlines, namely, the Acquasanta and Montagna dei Fiori anticlines, exposing the pre-orogenic Mesozoic carbonate sequence in the fold core (Fig. 1). These anticlines represent the upper hanging-wall structure of the Pliocene-Quaternary antiformal stack of the Central Apennines foothills (Paltrinieri et al. 1982;Scisciani & Montefalcone, 2006;Artoni, 2007;Scisciani & Calamita, 2009).
The E-dipping and overturned frontlimb of the Montagna dei Fiori Anticline has a NW-SE trend in the northern sector, changing from axial culmination S-wards to a N-S orientation. Contractional shear zones characterized by S-C (schistosité-cisaillement) fabric and parasitic folds occur along the forelimb of the anticline. The kinematic indicators consistently show a topto-NE (60-70°N) tectonic transport direction (Koopman, 1983). Reverse shear zones and detachment folds are also exposed in the backlimb of the anticline. The shear zones are confined to the upper section of the Miocene marly sequence, whereas the overlying Messinian turbidites (i.e. Laga Formation) appear undeformed (Koopman, 1983;Invernizzi & Ridolfi, 1992;Calamita et al. 1998;Mazzoli et al. 2002;Scisciani & Montefalcone, 2006). The similarity between the geometries and kinematics of the shear zones observed along the flanks of the Montagna dei Fiori Anticline indicates that the Palaeogene-Miocene pre-orogenic succession acted as a regional detachment level, along which the thick sedimentary wedge of the Laga Formation was translated foreland-wards with respect to the underlying Mesozoic sequence (Laga Detachment sensu Koopman, 1983).
The deep (> 10 km) structural setting of the Montagna dei Fiori structure has been debated by many authors, and both thin-and thick-skinned tectonic models have been applied to interpret the tectonic style of this sector of the outer Central Apennines (Paltrinieri et al. 1982;Bally et al. 1986;Calamita et al. 1994;Tozer et al. 2002;Albouy et al. 2003;Scisciani & Montefalcone, 2006).
Reconstructions showing low-angle thrust short-cut trajectories through the high-angle MdFF has highlighted a pre-thrusting origin (Scisciani et al. 2001a(Scisciani et al. , b, 2002Calamita et al. 2011Calamita et al. , 2012. The asymmetric ENE-verging, overturned anticline rides over a blind thrust and tips up-section into folded, thin-bedded, Cretaceous-Tertiary limestones. Based on this geometrical configuration, a simple fault-propagation folding was reconstructed by Di Francesco et al. (2010) for the Montagna dei Fiori structure.
During compilation of a revisited structural map of the area, we collected new structural-geological data. The documented structures are exposed within the overstep between the two en échelon arranged segments of the MdFF system in the axial culmination of the anticline. The collected field data and observations allow us to suggest a novel interpretation for the MdFF and to propose an alternative pre-thrusting structural setting for the Montagna dei Fiori structure.

3.a. Field data and observations
The crestal zone of the Montagna dei Fiori Anticline is affected by the WSW-dipping (N240-N260) MdFF. The fault extends for an   along-strike length of c. 12-14 km, running parallel to the anticlinal axial trend (Fig. 3). The fault system juxtaposes the weak Miocene hemipelagic succession (Marne Con Cerrogna Formation) in the hanging wall onto the mechanically stiff Jurassic-Cretaceous carbonate sequence in the footwall. At Colle Osso Caprino (COC in Fig. 4a, c), the well-exposed fault plane has a dip between 75°and 88°. In the anticline forelimb, c. 50 m from the MdFF footwall damage zone, bedding planes of the Corniola Formation have a constant dip of 30-40°towards the NE (Fig. 4c).
In the Castel Manfrino area, the MdFF system is composed of two NW-SE-striking, right-stepping en échelon arranged segments (Fig. 4). Along the Salinello River valley, these fault segments are linked by a transverse fault segment with a NE-SW trend (Fig. 4). Within the MdFF system stepover, the collected stratigraphic and structural data allow us to infer pre-Apennine contractional activity along the MdFF. In this area, a transversal fault palaeo-scarp is exposed on the left cliffside of the Salinello River. Along this outcrop, the Lower-Middle Jurassic Calcare Massiccio -Corniola formations are unconformably overlain by the Scaglia Rossa Formation. Samples collected along this contact and field mapping indicate a reduced succession (8-10 m thick) from the Late Cretaceous (Campanian-Maastrichtian) to late Paleocene (Planorotalites pseudomenardii Biozone) to middle Eocene (transition from the Scaglia Rossa Formation to Scaglia Variegata Formation) periods, as constrained by biostratigraphic dating. The unconformity exhibits an irregular and wavy surface dipping towards the NW with an average angle of 40° (Fig. 5a-d). Below the unconformity, the shallow-water platform carbonates of the Calcare Massiccio Formation are typically massive with metre-thick beds; above it, the pelagic limestones and marly limestones of the Scaglia Rossa Formation with centimetrethick chert intercalations show strata sub-parallel to the unconformity surface.
Pervasive millimetre-to centimetre-spaced, layer-parallel, pressure-solution cleavage affects the Scaglia Rossa Formation, which is very likely the result of lithostatic loading (Fig. 6). This persistent pressure-solution cleavage is involved in asymmetrical, decimetrescale folds observable within a metre-scale deformation zone above the unconformity (Fig. 6a). Mesoscopic folding is also highlighted by centimetre-thick chert layers (Fig. 6b). Fold axes trend NW-SE on average and plunge gently (c. 20°) towards the NW (Fig. 6).
NW-SE-and NNW-SSE-trending mesoscopic conjugate normal faults, with decimetre-to metre-scale offsets, affect the Scaglia Rossa Formation above the unconformity (Fig. 7a). Sub-horizontal pressure-solution seams are evident within the marly limestones and fault-bounded wedges (Fig. 7). Some of the extensional mesoscopic faults also displace the unconformity surface with metrescale displacements, and they have caused a local juxtaposition of the Scaglia Rossa Formation onto the Calcare Massiccio Formation (Fig. 7b).
Moving laterally along the strike of the two MdFF en échelon segments, decametric tectonic lenses of Scaglia Rossa and Scaglia Cinerea Formations occur both NW-wards and SE-wards of the Salinello River. These lenses, made up of Late Cretaceous -Palaeogene rocks, are interposed between the Jurassic formations in the MdFF footwall and the Marne con Cerrogna Formation, which is widely exposed in the MdFF hanging wall. Penetrative S-C shear fabrics are developed within these tectonic lenses (Fig. 8a, b). The diffuse contractional S-C fabric is characterized by both low-and high-angle, C-type conjugate, reverse shear planes and associated high-angle (60-75°), SW-dipping, pressure-solution, S-cleavage surfaces, which are sub-parallel to the MdFF plane, dipping 60-80°towards the SW (Fig. 8a). The Cshears offset the MdFF plane with a centimetre-to-decimetre scale displacement (Fig. 8b). Another S-C shear fabric with extensional kinematics can be observed within the tectonic lenses of the Scaglia Rossa and Scaglia Cinerea formations along the MdFF damage zone (Fig. 9a), as also documented by Storti et al. (2018). The extensional shear fabric is composed of 60-85°-inclined C-shear planes and 30-40°-inclined S-surfaces, both dipping towards the WSW (Fig. 9a). The contractional and extensional shear fabrics show mutual cross-cutting relationships with high-angle, top-to-

3.b. Revisited tectonic evolution of the MdFF
The Montagna dei Fiori anticline represents the uppermost structure of the leading antiformal stack of the outer Central-Northern Apennine thrust belt (Fig. 3d). The occurrence of an unconformable stratigraphic contact between the Lower-Middle Jurassic Calcare Massiccio -Corniola formations and the Scaglia Rossa Formation, preserved within the overstep of the MdFF system, allows us to confirm a pre-thrusting timing for the MdFF, with a main activity during latest Cretaceous -Palaeogene time (Fig. 5).
The attitude (30-40°dip towards the NE) of the footwall strata and the cut-off angle of c. 70°between the MdFF plane and the footwall bedding constrain the restoration to a pre-folding state of the MdFF with important implications for defining the original attitude of the fault plane and associated shear fabrics (Figs 9, 10). Restoring the MdFF footwall bedding to the horizontal by applying a rotation of 40°of magnitude along a NNW-SSE axis, the present-day WSW-dipping attitude of the MdFF plane turns into an ENE dip-direction attaining a high-angle, reverse-faulting character (Fig. 10a-d), and the apparent present-day extensional shear fabric (Fig. 9a) turns into a contractional fabric with top-to-SW kinematics (Fig. 9c, d).
By considering the new time constraint (mainly latest Cretaceous -Palaeogene activity) and the reverse fault geometry in the restored template (Fig. 10d), the MdFF can be interpreted as an up-thrust (Montagna dei Fiori Up-Thrust or MdFUT) with a top-to-the-WSW movement. The newly documented latest Cretaceous -Palaeogene timing is consistent with the onset of Dinaric contractional deformation (e.g. Schmid et al. 2008;Porkoláb et al. 2019), allowing us to define this fault as a WSWdirected, up-thrust of Dinaric affinity. This contractional fault system, developed within the Adriatic foreland ahead of the growing Dinaric chain (Fig. 1), would have been composed of two NW-SE regional frontal ramps linked by a NE-SW-trending local lateral ramp, although a different origin for the transverse fault due to stress axes permutations during inversion tectonics (e.g. see Peacock et al. 2017) cannot be ruled out. The lateral ramp actually accommodates the tectonic contact between the Scaglia Rossa and Scaglia Cinerea formations, cropping out above the unconformity, and the Marne con Cerrogna Formation. In addition, the thickness and facies variations of the Miocene Marne con Cerrogna Formation across the hanging-wall and footwall blocks of the MdFUT document renewed reverse fault activity during middle Miocene time (Fig. 11d). The Miocene syn-tectonic sedimentation in the MdFUT footwall (present-day hanging wall of the MdFF) exceeded 1000 m in thickness in the Marne con Cerrogna Formation with the hemipelagic marly sequence interbedded by abundant thick calcarenite packages. By contrast, the mostly marly and clayey sequence exposed in the hanging wall of the MdFUT (present-day footwall of the MdFF) is more reduced in thickness and reaches a maximum of c. 400 m.
The NW-SE-trending conjugate mesoscopic normal faults offsetting the Scaglia Rossa, the unconformity surface and the underlying Calcare Massiccio Formation, along the NE-SW-aligned lateral ramp of the MdFUT, can be related to the flexure of the foreland during the Messinian Age (Fig. 7), synchronous with the early onset of the ENE-directed Apennine thrust belt development (e.g. Boccaletti et al. 1990).
Cross-cutting relationships on the well-developed shear fabrics recognized within the lenses of the Scaglia Rossa -Scaglia Cinerea formations along the MdFUT (Fig. 9) allowed us to reconstruct the subsequent evolution of the MdFUT. The reverse S-C fabric, characterized by S-cleavage sub-parallel to the MdFUP surface and mesoscopic shear planes displacing the up-thrust with a top-tothe-ENE kinematic, testifies an early Apennine-affinity contractional overprint of the MdFUT. This structural assemblage can be ascribed to the buttressing effect (terminology after Butler, 1989) achieved by the stiff footwall block of the MdFUT during the foreland-directed propagation of the Laga Detachment zone (Messinianlower Pliocene; Koopman, 1983); a similar reconstruction has also been previously proposed by Calamita et al. (1998).
By restoring the regional dip of bedding to the horizontal, the S-C fabric, showing present-day normal kinematics, exhibits a reverse character that is consistent with post-Laga Detachment reactivation of the MdFUT during Pliocene Apennine thrusting in the outer zone of the belt (Figs 10, 11f). During this incipient Pliocene development of the Montagna dei Fiori thrust-related anticline, the MdFUT was reactivated as a backthrust defining a pop-up structure with frontal NE-directed thrusting (Fig. 11d). Subsequently, with the progressive evolution of the overturned breakthrough fault-propagation fold, the MdFUT was rotated to acquire an apparent present-day normal attitude (Fig. 11e).
The NNW-SSE-trending Montagna dei Fiori Anticline is a prominent regional-scale, overturned thrust-related fold within the antiformal stack at the leading edge of the Central Apennine thrust system. This fold represents the outermost E-verging positive structure in the peri-Adriatic foothills facing the deformed foreland basin. A map-scale, SW-dipping fault (MdFF) characterizes the hinge/forelimb zone of this anticline striking almost parallel to the anticlinal axial trend. The steeply dipping (70-80°) fault system produces a younger-on-older juxtaposition of the syn-orogenic Miocene Marne con Cerrogna Formation over the pre-orogenic Jurassic carbonate succession, with a throw of c. 1000 m. Interpretations concerning the tectonic significance and role of this fault within the evolution of this sector of the Apennines are still very controversial. This is due to a strong superimposition of different tectonic events as testified by mutual cross-cutting relationships between extensional and contractional structures recognized in the field at different observational scales and preventing unequivocal determination of the relative timing. Based on stratigraphic thickness variations of the Marne con Cerrogna Formation across hanging-wall and footwall fault blocks, Miocene prethrusting normal fault activity has been proposed by Calamita et al. (1998), Mazzoli et al. (2002 and Scisciani et al. (2001aScisciani et al. ( , b, 2002. By contrast, Ghisetti & Vezzani (2000) suggested this fault as having a substantial role as a normal fault during Pliocene syn-thrusting activity, which Storti et al. (2018) related to the collapse of the anticline backlimb as a consequence of gravitational re-equilibrium.
The structural-geological analysis presented in this study provides new stratigraphic and structural constraints to unravel the absolute and relative timing of the MdFF. By removing the Apennine contractional deformation from the Montagna dei Fiori Anticline and restoring the footwall strata to a pre-folding horizontal state, the footwall cut-off angle relationship implies an ENE dip direction of the MdFF that reveals an original highangle reverse-fault kinematics (MdFUT). The unconformable stratigraphic contact between the Lower-Middle Jurassic Calcare Massiccio -Corniola formations and the Scaglia Rossa Formation, preserved within a fault stepover, provides the absolute timing of the MdFUT that was active during Late Cretaceous -Palaeogene time.
The geological and structural setting of the peri-Adriatic foothills is characterized by the leading thrust system of the Apennine chain involving Pliocene-Quaternary foredeep deposits along the coastal area (Fig. 1b). In the Central Adriatic, compressive and transpressive tectonics produced a NW-SE-trending foreland deformation belt, known as the Mid-Adriatic Ridge (Fig. 2). The structural setting of the Mid-Adriatic Ridge is variously interpreted as intraplate inversion-dominated foreland deformation (Argnani & Gamberi, 1995;Scisciani & Calamita, 2009;Pace et al. 2015b) or as the thin-skinned thrust front of the NE-verging Apennines (Scrocca, 2006) or SW-verging Dinarides (Finetti & Del Ben, 2005) linked to onshore thrust belts via flat-laying detachments. Independent of the interpretation of the deep structural style of this contractional foreland deformation belt, two main phases of contractional deformation have been widely documented from the interpretation of seismic reflection profiles: a Late Cretaceous -Palaeogene phase, coeval with the onset of the SW-directed Dinaric thrust belt and a later Pliocene-Quaternary phase, synchronous with the late-stage evolution of the outer Apennines (e.g. Argnani & Gamberi, 1995;Finetti & Del Ben, 2005;Scisciani & Calamita, 2009). These distinct contractional pulses caused the multiple positive structural inversions of inherited Mesozoic rift basins developing symmetric or asymmetric inversion structures showing Dinaric (SW vergence) or Apennine (NE vergence) polarity, respectively. These inversion structures are frequently associated with up-thrusts (Scisciani, 2009;Pace et al. 2011;Mancinelli & Scisciani, 2020).
For instance, the Emma inversion structure is composed of an array of up-thrusts, resting mainly blind within the Palaeogene-Miocene succession, whereas the Messinian reflector and the overlying lower section of the Pliocene-Quaternary succession are gently folded. Some of these up-thrusts generated from the polyphase reverse reactivation of pre-existing Mesozoic normal faults, which bounded a Triassic-Jurassic extensional basin (Pace et al. 2015b). Unconformities, tilted on-laps and thickness variations with thinning towards the fold crest of the Upper Cretaceous -Oligocene sequence chart a first phase of up-thrusting and related anticline growth that is coeval with the onset of Dinaric foreland contractional deformation. The subsequent Pliocene-Quaternary contraction is mainly accommodated by folding, as extensively documented across the Mid-Adriatic Ridge. Lateral thickness variations of the lower-upper Pliocene sediments and converging on-laps from the fold limbs towards the fold axes of the inverted anticlines clearly constrain the subsequent Apennine foreland contractional phase (Scisciani, 2009;Pace et al. 2015b).
The latest Cretaceousmiddle Miocene timing and reverse character of the MdFF, documented for the first time by this study, shows many analogies with the early growth of inversion structures in the Mid-Adriatic Ridge. This allows us to interpret the regional MdFF as a Dinaric-age up-thrust (MdFUT) developed in the Adriatic foreland that was reactivated and rotated during Pliocene Apennine thrusting to acquire an apparent present-day normal attitude in the Apennine foothills. A possible origin for the MdFUT as the result of reverse reactivation of a pre-existing, Permian-Triassic ENE-dipping normal fault cannot be ruled out, by analogy with that of other Dinaric structures identified across the Mid-Adriatic ridge.  Fig. 3a). (c) Equal-area lower-hemisphere stereographic projection showing the MdFUT by restoring the footwall beddings best-fit to the horizontal. (d) Pre-thrusting restored template with the MdFF considered as a latest Cretaceousmiddle Miocene NE-dipping up-thrust; dashed shear planes within the Marne con Cerrogna Formation represent the so-called Laga detachment (Koopman, 1983).

Conclusions
A geological and structural study was performed in the Montagna dei Fiori Anticline, located within the foothills of the Central-Northern Apennine, Pliocene-Quaternary foreland, fold-andthrust belt. The tectonic significance of the regional NW-SEtrending MdFF was examined by integrating original stratigraphic and structural data. The newly acquired dataset enabled us to define the absolute and relative timing of the MdFF and to redefine the pre-thrusting structural setting of the Montagna dei Fiori structure. Based on the new timing and the mesoscopic structural and kinematic constraints, the MdFF is interpreted to have been originally generated as a NE-dipping up-thrust (MdFUT) developed in the Adriatic foreland during Late Cretaceousmiddle Miocene time, coeval with the Dinaric contractional deformation phase. During the Pliocene Epoch, this sector of the foreland plate became progressively incorporated into the advancing Apennine thrust belt. This caused the reactivation and rotation of the MdFUT within the developing Montagna dei Fiori Anticline to acquire an apparent present-day SW-dipping normal attitude.
Five main evolutionary deformation steps were reconstructed for the MdFF and related Montagna dei Fiori anticline (Fig. 11): (1) Development of a NE-dipping up-thrust (MdFUT) and related broad fault-bend anticline (Dinaric-age Montagna dei Fiori Anticline) during latest Cretaceous -Palaeogene time, which also recorded middle Miocene reactivation and growth (syn-Marne con Cerrogna Formation) in the Adriatic remote foreland of the SW-directed Dinaric thrust (Fig. 11a).
(2) Deposition of the Messinian siliciclastic Laga Formation in the Apennine foredeep (post-dating the Dinaric activity of the MdFUT) related to the foreland flexure and associated normal faulting, as documented at the mesoscopic scale with well developed conjugate systems (Fig. 11b).
(3) Development of the upper Messinian Laga detachment related to NE-directed Apennine thrusting, deforming the MdFUT that acted as a buttress (Fig. 11c). (4) Lower Pliocene thrusting with reactivation of the MdFUT as a backthrust within the incipient Apennine-age, Montagna dei Fiori, pop-up anticline (Fig. 11d). (5) Pliocene-Quaternary thrusting in the Apennine foothills with final development of the NE-verging Montagna dei Fiori anticline causing the foreland-wards rotation of the MFdUT to its apparent present-day, SW-dipping normal attitude (Fig. 11e).
This tectonic evolution from the Late Cretaceousmiddle Miocene Dinaric event to the Pliocene-Quaternary Apennine stage is further constrained by the overprinting relations among the reverse S-C fabrics within the Scaglia Rossa -Scaglia Cinerea tectonic lenses preserved along the MdFUT (Fig. 11f).