\documentclass[crop,onecolumn]{CSL}

\makeatletter
\def\onecolumn{%
  \global\columnwidth\textwidth
  \global\hsize\columnwidth
  \global\linewidth\columnwidth
  \global\@twocolumnfalse
  \col@number \@ne
  \@floatplacement}
\makeatother

\usepackage{boites}

\jname{International Journal of Microwave and Wireless Technologies}%

\newtheorem{theorem}{Theorem}
\newtheorem{condition}{Condition}

\begin{document}

\supertitle{Research Paper}

\title[Recto Running Head]{How to use the CUP Standard Large (CSL) \LaTeX\ class file}

\author[verso running head]{First author$^{1}$, Second author$^{2}$,
Third author$^{2}$, Fourth author$^{2}$, Fifth author$^{2}$ and
Seventh author$^{2}$}

\corres{\name{First author} \email{xxxx@xxxx.xxx.xx}}

\address{\auadd{1}{First author address} and
\auadd{2}{Second author address}}

\begin{abstract}
This sample is a guideline for preparing technical papers using \LaTeX\
for \textbf{CUP Standard Large (CSL)} manuscript submission. It contains the documentation for CSL \LaTeX\
class file, which implements the layout of the manuscript for CSL journals.
This sample file uses a class file named \texttt{CSL.cls} where the authors
should use during their manuscript preparation.
\end{abstract}

\selfcitation{Erhart C, Lutz S, Mutschler MA, Scharf PA, Walter T,
Mantz H, Weigel R (2019). Compact polarimetry for automotive
applications. International Journal of Microwave and Wireless
Technologies 1--7. https://xxxx/xx.xxxx/00000000}

\received{xx xxxx xxxx}

\revised{xx xxxx xxxx}

\accepted{xx xxxx xxxx}

\keywords{keyword entry 1, keyword entry 2, keyword entry 3}

\JELclassification{Q11; Q12; D81; M31}

\MSCcodes{Q14; Q18; D21}

\Abbreviations{BDHS: Bangladesh Demographic and HealthSurvey, IDA: Fe-deficiency anaemia, IFA: Fe-folic acid, MNP: multiple micronutrient powder, VAD: vitamin A deficiency}

\maketitle

\section{Introduction}\label{sec1}

This latex class file (CSL.cls) is available for authors to prepare
the manuscript for their own publishers. It is assumed that
the authors are familiar with either plain \TeX, \LaTeX,\
\AmS-\TeX\ or a standard latex set-up, hence only the
essential points are described in this document. For more
details please see the \textit{\LaTeX\ User's Guide} or
\textit{The not so short introduction to \LaTeXe} (which is available online).

\section{Installation}
The \texttt{CSL.cls} must be copied into a directory
where tex looks for an input files. The other files should be
keep as a reference during the preparation of the
manuscript. Please use pre-defined commands for title,
authors, address, abstract, keywords, body etc. as shown in Box~1.

\section{How to start using CSL.cls}

Before you type anything that actually appears in the paper
you need to include a \verb|\documentclass{CSL}|
command at the very beginning and the two commands
that have to be a part of any latex document,
\verb|\begin{document}| at the starting and the
\verb|\end{document}| at the end of the paper. The main
structure of the document should be as follows:


In order to start the second page in two column mode,
please use the command \verb+\Fpagebreak+ at end of the
first page text. If the above command is not given then it will throw
error message during compilation.

\vskip1pc

\noindent\verb+! LaTeX Error: Please insert \Fpagebreak tag at the end of first page.+

\section{Preamble part}

Please define the author macros, definitions and other packages in the preamble part.

\subsection{Paper Title}

The paper title is declared like: \verb|\title{...}| in the standard LATEX manner.
Line breaks \verb|\\| may be used to equalize the length of the title lines.

\subsection{Author Names}

The name and associated information is declared with the
\verb|\author| command. For more details about author information see Box 1.

\Fpagebreak

\onecolumn

\noindent Box 1: Structure of a document.

\vspace*{1pc}

\begin{breakbox}
\begin{verbatim}
\documentclass{CSL}

\jname{International Journal of Microwave and Wireless Technologies}
% Please include respective journal name here

\begin{document}

\supertitle{}%Insert Article type here

\title[Recto Running Head]{How to use the CUP Standard Large (CSL) \LaTeX\  class file}

\author[verso running head]{First  author$^{1}$, Second author$^{2}$,
 Third author$^{2}$, Fourth author$^{2}$, Fifth author$^{2}$
 and Seventh author$^{2}$}

\corres{\name{First author} \email{xxxx@xxxx.xxx.xx}}

\address{\auadd{1}{First author address} and \auadd{2}{Second author address}}

\begin{abstract}
Insert abstract text here
\end{abstract}

\selfcitation{Cite this article here}

\received{Received dates here}

\revised{Revised dates here}

\accepted{Accepted dates here}

\keywords{Insert key words here}

\JELclassification{Insert JEL classifications}

\MSCcodes{MSC Codes here}

\Abbreviations{Insert Abbreviations here}


\maketitle

\section{....}
...
\subsection{....}
....
\subsubsection{....}
...
\paragraph{....}
....

\end{document}
\end{verbatim}
\end{breakbox}

\subsection{Abstract \& Keywords}

The abstract is generally the first part of a paper. The abstract text is placed within the abstract
environment.

Keywords should be inserted immediately after the abstract text with grouping as shown below.
\begin{verbatim}
\begin{abstract}
Abstract text here
\end{abstract}

\keywords{Keyword text here}
\end{verbatim}

\section{Body part}

\subsection{Sections}
\label{sec3.6}

The coding for section is \verb|\section{text}|. This will generate section number automatically.
Use the starred form \verb|\section*{text}| of the command to suppress the automatic numbering.
If you want to make cross references to the section levels use the \verb|\label| and \verb|\ref| command.
You can have sections up to five levels.

The sectioning commands are \verb|\section|, \verb|\subsection|, \verb|\subsubsection|,
\verb|\paragraph| and \verb|\subparagraph|.

\section{Shaded Box}

To get the Shaded box, please use the command.

\begin{verbatim}
\begin{boxtext}
Sample box text sample box text sample box text sample box text
sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text.
\end{boxtext}
\end{verbatim}

\noindent\textbf{Output:}

\begin{boxtext}
Sample box text sample box text sample box text sample box text
sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text sample box text.
\end{boxtext}


\subsection{Figures and tables}\label{sec3.9}

Use the default \LaTeX\ coding for figures and tables.
Figure and table environments should be inserted
after the citations. The figures \& tables numberings will generate automatically. For example:

\vspace*{1pc}

\noindent The coding for figure is:

\begin{verbatim}
\begin{figure}
\includegraphics{sample.eps}
\caption{Insert figure caption\label{fig1}}
\end{figure}
\end{verbatim}

\noindent The coding for table is shown below, please use the command
\verb+\rowcolor{Theadcolor}+ to get the table head in shaded format.

{\small\begin{verbatim}
\begin{table}[!t]
\tabcolsep4pt
\processtable{Insert table caption here\label{tab1}}
{\begin{tabular*}{\textwidth}{@{\extracolsep{\fill}}llll@{}}\hline
\rowcolor{Theadcolor}Column head 1 & Column head 2  & Column head 3 & Column head 4\\\hline
Table body & Table body & Table body & Table body\\
Table body & Table body & Table body & Table body\\
Table body & Table body & Table body & Table body\\
Table body & Table body & Table body & Table body\\
Table body & Table body & Table body & Table body\\
\hline
\end{tabular*}}{\begin{tablenotes}
\item note 1
\item note 2
\end{tablenotes}}
\end{table}\end{verbatim}}

\begin{table}[!h]
\tabcolsep4pt
\processtable{Insert table caption here\label{tab1}}
{\begin{tabular}{@{\hspace*{4pt}}llll@{\hspace*{4pt}}}
\rowcolor{Theadcolor}
Column head 1 & Column head 2 & Column head 3 & Column head 4\\\hline
Table body & Table body & Table body & Table body\\\hline
Table body & Table body & Table body & Table body\\\hline
Table body & Table body & Table body & Table body\\\hline
Table body & Table body & Table body & Table body\\\hline
Table body & Table body & Table body & Table body\\\hline
\end{tabular}}{\begin{tablenotes}
\item note 1
\item note 2
\end{tablenotes}}
\end{table}


As always with \LaTeX, the \verb|\label| must be after the
\verb|\caption|, and inside the figure or table environment. The citations for
figures and tables inside text can be generate automatically by using the command \verb|\ref{key}|.

\begin{figure}[!h]
\begin{center}
{\includegraphics[width=3in]{fig1.eps}}
%%%call your figure name in the place "figurename.eps"
\caption{Insert figure caption here}
\label{fig_sim}
\end{center}
\end{figure}


\subsection{Equations}\label{sec3.10}

Equations are used in the same way as described in the \LaTeX\ manual.
The equation numbers will be generated automatically. For the below coding,
in parentheses flush right.\noindent

\begin{verbatim}
\begin{equation}\label{eq1}
\int^{r_2}_0 F(r,\varphi){\rm d}r\,{\rm d}
\varphi = [\sigma r_2/(2\mu_0)]
\end{equation}
\end{verbatim}
\begin{verbatim}
\begin{equation*}\label{eq1}
 \int^{\infty}_0\exp(-\lambda|z_j-z_i|)
\lambda^{-1}J_1 (\lambda r_2)J_0
(\lambda r_i\,\lambda {\rm d}\lambda)
\end{equation*}
\end{verbatim}
the desired output is:

\begin{equation}\label{eq1}
 \int^{\infty}_0\exp(-\lambda|z_j-z_i|)
\lambda^{-1}J_1 (\lambda r_2)J_0
(\lambda r_i\,\lambda {\rm d}\lambda)
\end{equation}

\begin{equation*}%
 \int^{\infty}_0\exp(-\lambda|z_j-z_i|)
\lambda^{-1}J_1 (\lambda r_2)J_0
(\lambda r_i\,\lambda {\rm d}\lambda)
\end{equation*}



This is one of the simplest equation of Latex. There are various complex equations which
can be achieved by using the following Latex commands which belongs to \verb|amsmath.sty|:

\verb|a) \begin{align}...\end{align},|

\verb|b) \begin{eqnarray}...\end{eqnarray},|

\verb|c) \begin{multline}...\end{multline},|

\verb|d) \begin{matrix}...\end{matrix},|

\verb|e) \begin{cases}...\end{cases},|

\verb|f) \begin{array}{ll}.....\end{array}|

\verb|g) \begin{subequations}...\end{subequations} etc.,|

\subsection{Quotes and displayed text}
\label{sec3.11}

Quotes are indented from the left and right margins. There are various types of quotes,
short quote, long quote and display poetry.\vspace*{1pc}

\noindent The coding for short quote is \verb|\begin{quote}...\end{quote}|.
\begin{quote}
   This is a short quotation.  It consists of a
   single paragraph of text.  See how it is formatted.
\end{quote}

\noindent The coding for long quote is

\verb|\begin{quotation}...\end{quotation}|.

\begin{quotation}
   This is a longer quotation.  It consists of two
   paragraphs of text, neither of which are
   particularly interesting.

   This is the second paragraph of the quotation.  It
   is just as dull as the first paragraph.
\end{quotation}

\subsection{Listings}
\label{sec3.12}

Another frequently displayed structure is a list. There are various types of list
numbered, itemized and bulleted list.

\noindent The following is an example of bulleted list.

\begin{verbatim}
\begin{itemize}
\item Bulleted list 1
\item Bulleted list 2
\item Bulleted list 3
\end{itemize}
\end{verbatim}

\noindent The following is an example of an numbered list.

\begin{verbatim}
\begin{enumerate}
\item Numbered list 1
\item Numbered list 2
\item Numbered list 3
\end{enumerate}
\end{verbatim}


\noindent The following is an example of description list.

\begin{verbatim}
\begin{description}
\item Description list 1
\item Description list 2
\item Description list 3
\end{description}
\end{verbatim}

\subsection{Enunciations: Theorem etc.}
\label{sec3.13}

These environments have to be defined with the help of \LaTeX's \verb|\newtheorem| command,
and also with the \AmS-\LaTeX\ package for theorems which is already with the class file.
For example \verb|\newtheorem{theorem}{Theorem}|. Pre-defined theorem styles can be used in
your chapter to differentiate the theorem-like environments.

\vskip1pc

\noindent \textbf{Input:}
\begin{verbatim}
\begin{theorem}
This is body matter for this environment
\end{theorem}
\end{verbatim}

\pagebreak

\noindent \textbf{Output:}

\begin{theorem}
This is body matter for this environment
\end{theorem}

Similarly, we can define for lemma, corollary, proposition, definition etc.

\subsection{Cross-references}
\label{sec3.14}

There are often cross-references to figures, tables and special segments of text.
\LaTeX\ provides the following commands for cross referencing\vspace*{1pc}

\noindent \verb|\label{marker}| and \verb|\ref{marker}|\vspace*{1pc}

\noindent where ``marker'' is an identifier chosen by the user. LATEX replaces \verb|\ref| by
the number of the section, subsection, figure, table, or theorem after which
the corresponding \verb|\label| command was issued.

\subsection{Citations}

For bibliography the natbib package has been defined in the
template with the options
\verb|\usepackage[authoryear]{natbib}| and
\verb|\usepackage[numbered]{natbib}|.

By default, CSL.cls produce author year references. If you
want numbered reference style then please use the option
"numbered" in the optional of document class command. For example:
\verb|\documentclass[numbered]{CSL}|

For more details about natbib.sty can be found at
http://ctan.org/tex-archive/macros/latex/contrib/natbib/

\ack[Acknowledgements]{Acknowledgements and other unnumbered sections can be achieved by
using the below command:}

\begin{verbatim}
\ack[Acknowledgement title]{Acknowledgment text}
\end{verbatim}

\section*{Back Matter}

\subsection{References}
\label{sec3.18}

The reference entries can be \LaTeX\ free text bibliographies or from a BIB\TeX\ database.
BIB\TeX\ is an adjunct to \LaTeX\ that aids in the preparation of bibliographies. BIB\TeX\
allows authors to build up a database or collection of bibliography entries that may be used for many
manuscripts. They also save us the trouble of having to specify formatting. More details can be found
in the \textit{BIB\TeX\ Guide}. For \LaTeX\ reference entries use the
\verb|\begin{thebibliography}...| \verb|\end{thebibliography}| environment to make references in your paper.

\begin{verbatim}
\begin{thebibliography}{}

\bibitem[Frey \textit{et~al.}(2003)]{Chen2001}
\textbf{Frey BS, Benz M and Stutzer A} (2003) Introducing procedural utility: not only what,
but also how matters. \textit{Journal of Institutional and Theoretical Economics} \textbf{60},
377--401.

\bibitem[Fullenkamp and Chami(2002)]{Chen1995}
\textbf{Fullenkamp R and Chami C} (2002) Trust and efficiency. \textit{Journal of Banking
and Finance} \textbf{26}(9), 1785--1809.

\bibitem[Gradstein and Justman(2002)]{Ahn1983}
\textbf{Gradstein M and Justman M} (2002) Education, social cohesion, and economic growth.
\textit{American Economic Review} \textbf{92}(4), 1192--1204.

\end{thebibliography}
\end{verbatim}

\subsection{Formatting}
\label{sec3.8}

Always use \LaTeX\ macros rather than the lower-level
\TeX\ macros, e.g., \verb|\it|, \verb|\bf| and \verb|\tt|. The
\LaTeX\ macros offer much improved features. The following table summarizes the font
selection commands in \LaTeX.

\subsection*{\LaTeX\ text formatting commands}
\begin{tabular*}{\columnwidth}{@{\extracolsep\fill}ll@{\hskip20pt}ll@{\extracolsep\fill}}
\verb|\textit|  & Italics      &\verb|\textsf|  & Sans Serif\\[3pt]
\verb|\textbf|  & Boldface     &\verb|\textsc|  & Small Caps\\[3pt]
\verb|\texttt|  & Typewriter   &\verb|\textmd|  & Medium Series\\[3pt]
\verb|\textrm|  & Roman        &\verb|\textnormal| & Normal Series\\[3pt]
\verb|\textsl|  & Slanted      &\verb|\textup|  & Upright Series
\end{tabular*}


\subsection*{\LaTeX\ math formatting commands}
{\footnotesize\begin{tabular*}{\columnwidth}{@{\extracolsep\fill}llll@{\extracolsep\fill}}
\verb|\mathit|     & Math Italics        &\verb|\mathfrak|   & Fraktur\\[3pt]
\verb|\mathbf|     & Math Boldface       &\verb|\mathbb|     & Blackboard Bold\\[3pt]
\verb|\mathtt|     & Math Typewriter     &\verb|\mathnormal| & Math Normal\\[3pt]
\verb|\mathsf|     & Math Sans Serif     &\verb|\boldsymbol| & Bold math for Greek letters\\[3pt]
\verb|\mathcal|    & Calligraphic        &                   & and other symbols
\end{tabular*}}


\section{Macro packages}
\label{sec4}

The commonly used packages which can be used frequently are:
\begin{verbatim}
amsmath         graphicx        rotating
amssymb         endnotes        subfigure
amsfonts        setspace        array
xspace          latexsym        url
amscd           multicol        algorithm
\end{verbatim}

Additionally, you can use other packages and these should be loaded
using the \verb|\usepackage| command in the preamble.


\begin{thebibliography}{}

\bibitem[Adade \textit{et~al.}(2003)]{Chen2001}
\textbf{Adade CM, de Castro SL and Soares MJ} (2007) Ultrastructural localization of
\textit{Trypanosoma cruzi} lysosomes by aryl sulphatase
cytochemistry. \textit{Micron} \textbf{38}, 252--256.


\bibitem[Bayer-Santos \textit{et~al.}(2002)]{Chen1995}
\textbf{Bayer-Santos E, Aguilar-Bonavides C, Rodrigues SP, Cordero
EM, Marques AF, Varela-Ramirez A, Choi H, Yoshida N, da Silveira JF
and Almeida IC} (2013) Proteomic analysis of \textit{Trypanosoma
cruzi}
secretome: characterization of two populations of extracellular
vesicles and soluble pro-teins. \textit{Journal of Proteome Research}
\textbf{12}, 883--897.
\end{thebibliography}

\appendix
\section{Appendix}
\label{sec3.16}

The \verb|\appendix| command signals that all following sections are
appendices, and therefore the headings will be set
as appendix headings.

Note: All the figures, tables, equations, enunciations will be automatically
numbered as A1, A2, etc. in the appendix part.

%%%%%%%%%%%% Biography text %%%%%%%%%%%%%%%%%%%%%%%%%%

\section{Author Biography}

Please use the coding \verb+\aubio{autho_rphoto.eps}{text....}+ to get the author biography details.

\aubio{author_photo.eps}{\textbf{First A. Author} received a degree in physics from the University
of A in 1998 and received his Ph.D. degree in communication engineering in
2002. He now holds a research chair at the B institute. His main research
interests are design and optimization of high power microwave power
amplifiers.}

\vskip3pc

\aubio{author_photo.eps}{\textbf{Second B. Author} received her Diploma in 1997 from the University of
C and received her Ph.D. at the D University in 2001. She became a full
university professor in 2009. She is currently serving as chair of the E
project and is active in the study of Si power electronics.}

\end{document}
