Hostname: page-component-848d4c4894-m9kch Total loading time: 0 Render date: 2024-06-02T21:10:10.827Z Has data issue: false hasContentIssue false
  • English
  • Français

Reynolds number effect on the response of a rough wall turbulent boundary layer to local wall suction

Published online by Cambridge University Press:  12 April 2021

F. Ghanadi Open the ORCID record for F. Ghanadi [Opens in a new window]  and
L. Djenidi Open the ORCID record for L. Djenidi [Opens in a new window]
F. Ghanadi*
Affiliation:
Mechanical Engineering, University of Newcastle, Newcastle, NSW2308, Australia
L. Djenidi
Affiliation:
Mechanical Engineering, University of Newcastle, Newcastle, NSW2308, Australia
*
†Email address for correspondence: farzin.ghanadi@newcastle.edu.au
Get access Rights & Permissions [Opens in a new window]

Abstract

The combined effect of Reynolds number ($Re$) and localised wall suction applied through a porous strip on a fully rough wall turbulent boundary layer (TBL) is investigated using hot-wire anemometry. The measurements show that the response of the TBL to suction is modulated by the ratio $U_s/U_\tau$, where $U_s$ and $U_\tau$ are the suction and friction velocities, respectively. For example the suction impact on the mean velocity and the turbulence intensity profiles, which is felt across the boundary layer, decreases as $U_s/U_\tau$ decreases. Interestingly, the velocity spectra contour maps reveal that suction reduces the energy at all scales of motion across the boundary layer. Further, measurements of the velocity skewness indicate that the TBL undergoes a structural change when the ratio $U_s/U_\tau$ is relatively important. However, the measurements also reveal that TBL does not show a relaminarisation behaviour as it can be observed in a smooth wall TBL with similar localised wall suction. This lack of relaminarisation is due to the development of a growing internal boundary layer which evolves on a rough surface within the existing TBL.

JFM classification

Turbulent Flows: Turbulent boundary layers Boundary Layers: Boundary layer control
Type
JFM Papers
Information
Journal of Fluid Mechanics , Volume 916 , 10 June 2021 , A25
Check for updates
Copyright
© The Author(s), 2021. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Abbassi, M.R., Baars, W.J., Hutchins, N. & Marusic, I. 2017 Skin-friction drag reduction in a high-Reynolds-number turbulent boundary layer via real-time control of large-scale structures. Intl J. Heat Fluid Flow 67, 30–41.CrossRefGoogle Scholar
Antonia, R.A., Fulachier, L., Krishnamoorthy, L.V., Benabid, T. & Anselmet, F. 1988 Influence of wall suction on the organized motion in a turbulent boundary layer. J. Fluid Mech. 190, 217–240.CrossRefGoogle Scholar
Antonia, R.A., Zhu, Y. & Sokolov, M. 1995 Effect of concentrated wall suction on a turbulent boundary layer. Phys. Fluids 7 (10), 2465–2474.CrossRefGoogle Scholar
Bobke, A., Örlü, R. & Schlatter, P. 2016 Simulations of turbulent asymptotic suction boundary layers. J. Turbul. 17 (2), 157–180.CrossRefGoogle Scholar
Chung, D. & McKeon, B.J. 2010 Large-eddy simulation of large-scale structures in long channel flow. J. Fluid Mech. 661, 341–364.CrossRefGoogle Scholar
Connelly, J.S., Schultz, M.P. & Flack, K.A. 2006 Velocity-defect scaling for turbulent boundary layers with a range of relative roughness. Exp. Fluids 40 (2), 188–195.CrossRefGoogle Scholar
Çuhadaroğlu, B., Akansu, Y.E. & Turhal, A.O. 2007 An experimental study on the effects of uniform injection through one perforated surface of a square cylinder on some aerodynamic parameters. Expl Therm. Fluid Sci. 31 (8), 909–915.CrossRefGoogle Scholar
Djenidi, L., Agrawal, A. & Antonia, R.A. 2009 Anisotropy measurements in the boundary layer over a flat plate with suction. Expl Therm. Fluid Sci. 33 (7), 1106–1111.CrossRefGoogle Scholar
Djenidi, L. & Antonia, R.A. 2001 Calculation of the effect of concentrated wall suction on a turbulent boundary layer using a second-order moment closure. Intl J. Heat Fluid Flow 22 (5), 487–494.CrossRefGoogle Scholar
Djenidi, L., Gall, P.E., Vincent, A. & Antonia, R.A. 2002 Effect of wall suction on the structure of a turbulent boundary layer. In 11th International Symposium on Applications of Laser Techniques in Fluid Mechanics. Paper No 23.1.Google Scholar
Djenidi, L., Kamruzzaman, M. & Dostal, L. 2019 a Effects of wall suction on a 2D rough wall turbulent boundary layer. Exp. Fluids 60 (3), 43.CrossRefGoogle Scholar
Djenidi, L., Talluru, K.M. & Antonia, R.A. 2018 Can a turbulent boundary layer become independent of the Reynolds number? J. Fluid Mech. 851, 1–22.CrossRefGoogle Scholar
Djenidi, L., Talluru, K.M. & Antonia, R.A. 2019 b A velocity defect chart method for estimating the friction velocity in turbulent boundary layers. Fluid Dyn. Res. 51 (4), 045502.CrossRefGoogle Scholar
Fernholz, H.H. & Warnack, D. 1998 The effects of a favourable pressure gradient and of the Reynolds number on an incompressible axisymmetric turbulent boundary layer. Part 1. The turbulent boundary layer. J. Fluid Mech. 359, 329–356.CrossRefGoogle Scholar
Gad-el Hak, M. & Blackwelder, R.F. 1989 Selective suction for controlling bursting events in a boundary layer. AIAA J. 27 (3), 308–314.CrossRefGoogle Scholar
Healzer, J., Moffat, R. & Kays, W. 1974 The turbulent boundary layer on a porous, rough plate-experimentalheat transfer with uniform blowing. In Thermophysics and Heat Transfer Conference, p. 680.Google Scholar
Hultmark, M., Vallikivi, M., Bailey, S.C.C. & Smits, A.J. 2013 Logarithmic scaling of turbulence in smooth-and rough-wall pipe flow. J. Fluid Mech. 728, 376–395.CrossRefGoogle Scholar
Hutchins, N., Nickels, T.B., Marusic, I. & Chong, M.S. 2009 Hot-wire spatial resolution issues in wall-bounded turbulence. J. Fluid Mech. 635, 103–136.CrossRefGoogle Scholar
Jackson, P.S. 1981 On the displacement height in the logarithmic velocity profile. J. Fluid Mech. 111, 15–25.CrossRefGoogle Scholar
Jacobson, S.A. & Reynolds, W.C. 1998 Active control of streamwise vortices and streaks in boundary layers. J. Fluid Mech. 360, 179–211.CrossRefGoogle Scholar
Johansson, A.V. & Alfredsson, P.H. 1983 Effects of imperfect spatial resolution on measurements of wall-bounded turbulentbx shear flows. J. Fluid Mech. 137, 409–421.CrossRefGoogle Scholar
Kametani, Y., Fukagata, K., Örlü, R. & Schlatter, P. 2015 Effect of uniform blowing/suction in a turbulent boundary layer at moderate Reynolds number. Intl J. Heat Fluid Flow 55, 132–142.CrossRefGoogle Scholar
Kamruzzaman, M., Talluru, K.M., Djenidi, L. & Antonia, R.A. 2014 An experimental study of turbulent boundary layer over 2d transverse circular bars. In 19th Australasian Fluid Mechanics Conference, Melbourne, Australia.CrossRefGoogle Scholar
Khapko, T., Schlatter, P., Duguet, Y. & Henningson, D.S. 2016 Turbulence collapse in a suction boundary layer. J. Fluid Mech. 795, 356–379.CrossRefGoogle Scholar
Leonardi, S., Orlandi, P., Smalley, R.J., Djenidi, L. & Antonia, R.A. 2003 Direct numerical simulations of turbulent channel flow with transverse square bars on one wall. J. Fluid Mech. 491, 229–238.CrossRefGoogle Scholar
Ligrani, P.M. & Bradshaw, P. 1987 Spatial resolution and measurement of turbulence in the viscous sublayer using subminiature hot-wire probes. Exp. Fluids 5 (6), 407–417.CrossRefGoogle Scholar
Lockerby, D.A., Carpenter, P.W. & Davies, C. 2005 Control of sublayer streaks using microjet actuators. AIAA J. 43 (9), 1878–1886.CrossRefGoogle Scholar
Marusic, I., Talluru, K.M. & Hutchins, N. 2014 Controlling the large-scale motions in a turbulent boundary layer. In Fluid-Structure-Sound Interactions and Control, pp. 17–26. Springer.CrossRefGoogle Scholar
Miller, M.A., Martin, A. & Bailey, S.C.C. 2014 Investigation of the scaling of roughness and blowing effects on turbulent channel flow. Exp. Fluids 55 (2), 1675.CrossRefGoogle Scholar
Myose, R.Y. & Blackwelder, R.F. 1995 Control of streamwise vortices using selective suction. AIAA J. 33 (6), 1076–1080.CrossRefGoogle Scholar
Örlü, R. & Schlatter, P. 2011 On the fluctuating wall-shear stress in zero pressure-gradient turbulent boundary layer flows. Phys. Fluids 23 (2), 021704.CrossRefGoogle Scholar
Oyewola, O., Djenidi, L. & Antonia, R.A. 2003 Combined influence of the Reynolds number and localised wall suction on a turbulent boundary layer. Exp. Fluids 35 (2), 199–206.CrossRefGoogle Scholar
Park, J. & Choi, H. 1999 Effects of uniform blowing or suction from a spanwise slot on a turbulent boundary layer flow. Phys. Fluids 11 (10), 3095–3105.CrossRefGoogle Scholar
Qiao, Z.X., Zhou, Y. & Wu, Z. 2017 Turbulent boundary layer under the control of different schemes. Proc. R. Soc. A 473 (2202), 20170038.CrossRefGoogle ScholarPubMed
Rathnasingham, R. & Breuer, K.S. 2003 Active control of turbulent boundary layers. J. Fluid Mech. 495, 209–233.CrossRefGoogle Scholar
Rebbeck, H. & Choi, K.-S. 2006 A wind-tunnel experiment on real-time opposition control of turbulence. Phys. Fluids 18 (3), 035103.CrossRefGoogle Scholar
Schetz, J.A. & Nerney, B. 1977 Turbulent boundary layer with injection and surface roughness. AIAA J. 15 (9), 1288–1294.CrossRefGoogle Scholar
Segawa, T., Mizunuma, H., Murakami, K., Li, F.-C. & Yoshida, H. 2007 Turbulent drag reduction by means of alternating suction and blowing jets. Fluid Dyn. Res. 39 (7), 552.CrossRefGoogle Scholar
Squire, D.T., Hutchins, N., Morrill-Winter, C., Schultz, M.P., Klewicki, J.C. & Marusic, I. 2017 Applicability of Taylor's hypothesis in rough-and smooth-wall boundary layers. J. Fluid Mech. 812, 398–417.CrossRefGoogle Scholar
Talluru, K.M., Kulandaivelu, V., Hutchins, N. & Marusic, I. 2014 A calibration technique to correct sensor drift issues in hot-wire anemometry. Meas. Sci. Technol. 25 (10), 105304.CrossRefGoogle Scholar
Taylor, G.I. 1938 The spectrum of turbulence. Proc. R. Soc. Lond. A 164 (919), 476–490.Google Scholar
Tennekes, H., et al. 1972 A First Course in Turbulence. MIT Press.CrossRefGoogle Scholar
Warnack, D. & Fernholz, H.H. 1998 The effects of a favourable pressure gradient and of the Reynolds number on an incompressible axisymmetric turbulent boundary layer. Part 2. The boundary layer with relaminarization. J. Fluid Mech. 359, 357–381.CrossRefGoogle Scholar
Yoshioka, S. & Alfredsson, P.H. 2006 Control of turbulent boundary layers by uniformwall suction and blowing. In IUTAM Symposium on Laminar-Turbulent Transition, pp. 437–442. Springer.CrossRefGoogle Scholar