Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-10-31T23:42:27.472Z Has data issue: false hasContentIssue false

An energy-based method to extract plastic properties of metal materials from conical indentation tests

Published online by Cambridge University Press:  03 March 2011

Yan Ping Cao
Affiliation:
Laboratoire des systèmes mécaniques et díngénierìe simultanée, FRE, CNRS 2719, Université de technologie de Troyes, Troyes 10010, France
Xiu Qing Qian
Affiliation:
Department of Engineering Mechanics, Tsinghua University, Beijing 100084, People's Republic of China
Jian Lu*
Affiliation:
Laboratoire des systèmes mécanique et dingénierie simultanée, FRE, CNRS 2719, Université de technologie de Troyes, Troyes 10010, France
Zhen Han Yao
Affiliation:
Department of Engineering Mechanics, Tsinghua University, Beijing 100084, People's Republic of China
*
a) Address all correspondence to this author. e-mail: Jian.Lu@utt.fr
Get access

Abstract

Based on dimensional analysis and finite element computations, an energy-based representative strain for conical indentation in elastoplastic materials has been proposed to establish an explicitly one-to-one relationship between the representative stress σr, the indentation loading curvature C, and the ratio of reversible work We to total work Wt performed by the indenter, i.e., σr/C = F0(We/Wt), where σr is the flow stress corresponding to the representative strain. The relationship provides a very simple method to evaluate the representative stress σr from the three directly measurable quantities We, Wt, and C. Numerical examples and further theoretical analysis reveal that a unique, stable solution can be obtained from the present method for a wide range of material properties, including both highly plastic materials (e.g., Ni for which Ey = 1070) and highly elastic materials (e.g., materials for which Ey = 25 and n = 0.5), using indenters with different tip apex angles. Based on the representative strains and stresses given by two indenters with different tip apex angles, e.g., (σr,80, ϵr,80) and (σr,65, ϵr,65), the plastic properties of materials, i.e., the yield strength σy and strain hardening exponent n can be further determined.

Type
Articles
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Tabor, D.: Indentation hardness: Fifty years on—A personal view. Philos. Mag. A 74, 1207 (1996).CrossRefGoogle Scholar
2.Doener, M.F. and Nix, W.D.: A method for interpreting the data from depth-sensing indentation instruments. J. Mater. Res. 1, 601 (1986).CrossRefGoogle Scholar
3.Oliver, W.C. and Pharr, G.M.: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).CrossRefGoogle Scholar
4.Giannakopoulos, A.E. and Suresh, S.: Determination of elastoplastic properties by instrumented sharp indentation. Scripta Mater. 40, 1191 (1999).CrossRefGoogle Scholar
5.Dao, M., Chollacoop, N., Van Vliet, K.J., Venkatesh, T.A. and Suresh, S.: Computational modelling of the forward and reverse problems in instrumented sharp indentation. Acta Mater. 49, 3899 (2001).CrossRefGoogle Scholar
6.Cheng, Y.T. and Cheng, C.M.: Can stress–strain relationships be obtained from indentation curves using conical and pyramidal indenters? J. Mater. Res. 14, 3493 (1999).CrossRefGoogle Scholar
7.Capehart, T.W. and Cheng, Y.T.: Determining constitutive models from conical indentation: Sensitivity analysis. J. Mater. Res. 18, 827 (2003).CrossRefGoogle Scholar
8.Tho, K.K., Swaddiwudhipong, S., Liu, Z.S., Zeng, K. and Hua, J.: Uniqueness of reverse analysis from conical indentation tests. J. Mater. Res. 19, 2498 (2004).CrossRefGoogle Scholar
9.Tunvisut, K., O’Dowd, N.P. and Busso, E.P.: Use of scaling functions to determine mechanical properties of thin coatings from microindentation tests. Int. J. Solids Struct. 38, 335 (2001).CrossRefGoogle Scholar
10.Mata, M. and Alcalá, J.: Mechanical property evaluation through sharp indentations in elastoplastic and fully plastic contact regimes. J. Mater. Res. 18, 1705 (2003).CrossRefGoogle Scholar
11.Mata, M. and Alcalá, J.: The role of friction on sharp indentation. J. Mech. Phys. Solids. 52, 145 (2004).CrossRefGoogle Scholar
12.Futakawa, M., Wakui, T., Tanabe, Y.J. and Ioka, I.: Identification of the constitutive equation by the indentation technique using plural indenters with different apex angles. J. Mater. Res. 16, 2283 (2001).CrossRefGoogle Scholar
13.DiCarlo, A. and Yang, H.T.Y.: Semi-inverse method for predicting stress–strain relationship from cone indentations. J. Mater. Res. 18, 2068 (2003).CrossRefGoogle Scholar
14.Bucaille, J.L., Stauss, S., Felder, E. and Michler, J.: Determination of plastic properties of metals by instrumented indentation using different sharp indenters. Acta Mater. 51, 1663 (2003).CrossRefGoogle Scholar
15.Chollacoop, N., Dao, M. and Suresh, S.: Depth-sensing instrumented indentation with dual sharp indenters. Acta Mater. 51, 3713 (2003).CrossRefGoogle Scholar
16.Swaddiwudhipong, S., Tho, K.K., Liu, Z.S. and Zeng, K.: Material characterization based on dual indenters. Int. J. Solids Struct. 42, 69 (2005).CrossRefGoogle Scholar
17.Cao, Y.P. and Lu, J.: Depth-sensing instrumented indentation with dual indenters: Stability analysis and corresponding regularization schemes. Acta Mater. 52, 1143 (2004).CrossRefGoogle Scholar
18.Cheng, Y.T. and Cheng, C.M.: Relationships between hardness, elastic modulus, and the work of indentation. Appl. Phys. Lett. 73, 614 (1998).CrossRefGoogle Scholar
19.Cheng, Y.T. and Cheng, C.M.: Scaling approach to conical indentation in elastic-plastic solids with work hardening. J. App. Phys. 84(3), 1284 (1998).CrossRefGoogle Scholar
20.Cheng, Y.T. and Cheng, C.M.: Scaling relationships in conical indentation of elastic-perfectly plastic solids. Int. J. Solids Struct. 36, 1231 (1999).CrossRefGoogle Scholar
21.Cheng, Y.T. and Cheng, C.M.: Scaling, dimensional analysis, and indentation measurements. Mater. Sci. Eng. R 44, 91 (2004).CrossRefGoogle Scholar
22.ABAQUS, : Theory Manual Version 6.4 (Hibbitt, Karlsson and Sorensen Inc, Pawtucket, RI, 2004).Google Scholar
23.Tabor, D.: Hardness of Metals (Clarendon Press, Oxford, U.K., 1951).Google Scholar
24.Johnson, K.L.: The correlation of indentation experiments. J. Mech. Phys. Solids 18, 115 (1970).CrossRefGoogle Scholar
25.Larsson, P.L.: Investigation of sharp contact at rigid–plastic conditions. Int. J. Mech. Sci. 43, 895 (2001).CrossRefGoogle Scholar
26.Bucaille, J.L. and Felder, E.: Finite-element analysis of deformation during indentation and scratch tests on elastic-perfectly plastic materials. Philos. Mag. A 82, 2003 (2002).CrossRefGoogle Scholar
27.Mata, M., Anglada, M. and Alcalá, J.: Contact deformation regimes around sharp indentations and the concept of the characteristic strain. J. Mater. Res. 17, 964 (2002).CrossRefGoogle Scholar
28.Cheng, Y.T. and Cheng, C.M.: Further analysis of indentation loading curves: Effects of tip rounding on mechanical property measurements. J. Mater. Res. 13, 1059 (1998).CrossRefGoogle Scholar
29.Bucaille, J.L., Stauss, S., Schwaller, P. and Micher, J.: A new technique to determine the elastoplastic properties of thin metallic films using sharp indenters. Thin Solid Films 447, 239 (2004).CrossRefGoogle Scholar
30.Sun, S., Zheng, S., Bell, T. and Smith, J.: Indenter tip radius and load frame compliance calibration using nanoindentation loading curves. Philos. Mag. Lett. 79, 649 (1999).CrossRefGoogle Scholar
31.Thurn, J., Morris, D.J. and Cook, R.F.: Depth-sensing indentation at macroscopic dimensions. J. Mater. Res. 17, 2679 (2002).CrossRefGoogle Scholar
32.Van, K.J., Prchlik, V.L. and Smith, J.F.: Direct measurement of indentation frame compliance. J. Mater. Res. 19, 325 (2004).Google Scholar
33.Oliver, W.C. and Pharr, G.M.: Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinement to methodology. J. Mater. Res. 19, 3 (2004).CrossRefGoogle Scholar
34.Cao, Y.P. and Lu, J.: A new method to extract the plastic properties of metal materials from an instrumented spherical indentation loading curve. Acta Mater. 52, 4023 (2004).CrossRefGoogle Scholar
35.Suresh, S.: Graded materials for resistance to contact deformation and damage. Science 292, 2447 (2001).CrossRefGoogle ScholarPubMed
36.Giannakopoulos, A.E.: Indentation of plastically graded substrates by sharp indenters. Int. J. Solids Struct. 39, 2495 (2002).CrossRefGoogle Scholar
37.De Guzman, M.S., Neubauer, G., Flinn, P., and Nix, W.D.: The role of indentation depth on the measured hardness of materials, in Thin Films: Stresses and Mechanical Properties IV, edited by Townsend, P.H., Weihs, T.P., Sanchez, J.E. Jr., and Borgesen, P. (Mater. Res. Soc. Symp. Proc. 308, Pittsburgh, PA, 1993), pp. 613.Google Scholar
38.Stelmashenko, N.A., Walls, M.G., Brown, L.M. and Milman, Y.V.: Micro-indentation on W and Mo oriented single crystals: An STM study. Acta Metall. Mater. 41, 2855 (1993).CrossRefGoogle Scholar
39.Nix, W.D. and Gao, H.: Indentation size effects in crystalline materials: A law for strain gradient plasticity. J. Mech. Phys. Solids 46, 411 (1998).CrossRefGoogle Scholar
40.Arzt, E.: Size effect in materials due to microstructural and dimensional constraints: A comparative review. Acta Mater. 46, 5611 (1998).CrossRefGoogle Scholar
41.Cao, Y.P. and Lu, J.: A new scheme for computational modelling of conical indentation in plastically-graded materials. J. Mater. Res. 19, 1703 (2004).CrossRefGoogle Scholar
42.Cao, Y.P. and Lu, J.: Size-dependent sharp indentation I: A closed-form expression of the indentation loading curve. J. Mech. Phys. Solids 53, 33 (2005).CrossRefGoogle Scholar
43.Cao, Y.P. and Lu, J.: Size-dependent sharp indentation II: A reverse algorithm to identify plastic properties of metallic materials. J. Mech. Phys. Solids 53, 49 (2005).CrossRefGoogle Scholar