Hostname: page-component-848d4c4894-nr4z6 Total loading time: 0 Render date: 2024-06-03T05:08:41.263Z Has data issue: false hasContentIssue false
  • English
  • Français

Deposition of Gan Films Using Seeded Supersonic Jets

Published online by Cambridge University Press:  21 February 2011

H. Henry Lamb ,
Ken K. Lai ,
Victor Torres  and
Robert F. Davis
H. Henry Lamb
Affiliation:
Department of Chemical Engineering, North Carolina State University, Raleigh, NC 27695-7905
Ken K. Lai
Affiliation:
Department of Chemical Engineering, North Carolina State University, Raleigh, NC 27695-7905
Victor Torres
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695-7907
Robert F. Davis
Affiliation:
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695-7907
Get access

Abstract

GaN films were deposited on sapphire (0001) from triethylgallium (TEG) and NH3 seeded in separate He free jets. as the dissociative chemisorption of NH3 is expected to be rate-limiting in GaN growth, the NH3/He nozzle temperature was varied to control the incident kinetic energy of the NH3 molecules. Using an NH3/TEG flow ratio of 205 and an NH3/He nozzle temperature of 400°C, stoichiometric films were deposited at substrate temperatures ≥530°C. Scanning electron microscopy revealed that films deposited at 580°C are polycrystalline α-GaN with randomly oriented 0.5-μm grains. Films with a closely similar morphology are deposited by using an NH3/He nozzle temperature of 90°C. IN contrast, films deposited at 580°C using an NH3/He nozzle temperature of 510°C consist of whiskers (aspect ratio = c A. 4) which exhibit a-GaN (0001)/sapphire (0001) heteroepitaxy, as evidenced by X-ray diffraction and reflection high-energy electron diffraction.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 388: Symposium Q – Film Synthesis and Growth Using Energetic Beams , 1995 , 265
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Pankove, J. I., Mater. Res. Soc. Proc. 162, 515 (1990).Google Scholar
2 Davis, R. F., Proc. IEEE 79, 702 (1991).Google Scholar
3 Yoshida, S., Misawa, S. and Gonda, S., Appl. Phys. Lett. 42, 427 (1983).Google Scholar
4 Maruska, H. P. and Tietjen, J. J., Appl. Phys. Lett. 15, 327 (1969).Google Scholar
5 Nakamura, S., Japan. J. appl. Phys. 30, L1705 (1991).Google Scholar
6 Powell, R. C., N. -E. Lee and Greene, J. E., Appl. Phys. Lett. 60, 2505 (1992).Google Scholar
7 Eddy, C. R. Jr., Moustakas, T. D., and Scanlon, J., J. appl. Phys. 73, 448 (1993).Google Scholar
8 Wang, C. and Davis, R. F., Appl. Phys. Lett. 63, 990 (1993).Google Scholar
9 Ceyer, S. T., Science 249, 133 (1990).Google Scholar
10 Engstrom, J. R., Hansen, D. A., Furjanic, M. J., and Xia, L. Q., J. Chem. Phys. 99, 4051 (1993).Google Scholar
11 Miller, D. R., in Atomic and Molecular Beam Methods, edited by Scoles, G. (Oxford Press, New York, 1988) pp. 14–53.Google Scholar