Hostname: page-component-848d4c4894-4rdrl Total loading time: 0 Render date: 2024-06-15T16:21:29.374Z Has data issue: false hasContentIssue false
  • English
  • Français

Device Simulation and Design Optimization for Diamond Based Insulated-gate Bipolar Transistors

Published online by Cambridge University Press:  01 February 2011

Haitao Ye ,
Niall Tumilty ,
David Garner  and
Richard B. Jackman
Haitao Ye
Affiliation:
University College London, University College London, London Centre for Nanotechnology, 17-19 Gordon Street, London, N/A, United Kingdom
Niall Tumilty
Affiliation:
n.tumilty@ee.ucl.ac.uk, University College London, London Centre for Nanotechnology, 17-19 Gordon Street, London, WC1H 0AH, United Kingdom
David Garner
Affiliation:
dmg@camsemi.com, Cambridge Semiconductors, St. Andrew's House, St. Andrew's Road, Cambridge, CB4 1DL, United Kingdom
Richard B. Jackman
Affiliation:
r.jackman@ucl.ac.uk, University College London, London Centre for Nanotechnology, 17-19 Gordon Street, London, WC1H 0AH, United Kingdom
Get access

Abstract

A diamond based insulated gate bipolar transistor is incorporated into a two-dimensional device simulator (MEDICI) to examine the current gain (β) and potential distribution across the device. Initially, work has focused on an important component of IGBT structure, the PNP bipolar transistor, which has been simulated and is reported upon in this paper. Empirical parameters for emitter and collector regions were used. Various carrier concentrations for base region were used to optimize the simulation. It was found that decreasing the thickness of base region leads to an increase in current gain. A buffer layer is needed to prevent the punch-through at low carrier concentration in the base region. Various approaches of increasing the current gain are also discussed in this paper.

Keywords

diamonddevicessimulation
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 956: Symposium J – Diamond Electronics—Fundamentals to Applications , 2006 , 0956-J09-17
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Yoder, M. N., IEEE Transactions on Electron Devices 43 (1996) 1633.Google Scholar
2. Chow, T.P., Khemka, V., Fedison, J., Ramungal, N., Matocha, K., Tang, Y. and Gutmann, R.J., Solid-State Electronics 44 (2000) 277.Google Scholar
3. Khanna, Vinod Kumar, The Insulated Gate Bipolar Transistor, Theory and Design, A Wiley-Interscience publication, 2003 Google Scholar
4. Tsugawa, K., Kitatani, K., Noda, H., Hokazono, A., Hirose, K., Tajima, M. and Kawarada, H., Diamond Related Materials 8 (1999) 927 Google Scholar
5. Koizumi, S, Watanabe, K, Hasegawa, M, Kanda, H, Science 292 (2001), 1899 Google Scholar
6. MEDICI: Two-Dimensional Device Simulation Program, Version 2.0, Technology Modelling Associates, Inc., Palo Alto, CA, 1994.Google Scholar
7. Trew, R. J., Yan, J.-B. and Mock, P. M., Proceedings of IEEE 79 (1991) 598.Google Scholar
8. www.e6.comGoogle Scholar