Hostname: page-component-848d4c4894-hfldf Total loading time: 0 Render date: 2024-06-01T17:54:05.021Z Has data issue: false hasContentIssue false
  • English
  • Français

Electromigration Characterization Versus Texture Analysis in Damascene Copper Interconnects

Published online by Cambridge University Press:  17 March 2011

T. Berger ,
L. Arnaud ,
R. Gonella ,
I. Touet  and
G. Lormand
T. Berger
Affiliation:
ST MICROELECTRONICS, 38926 Crolles CEDEX, FRANCE
L. Arnaud
Affiliation:
CEA, Direction des Technologies Avancées, 38054 Grenoble CEDEX, FRANCE
R. Gonella
Affiliation:
ST MICROELECTRONICS, 38926 Crolles CEDEX, FRANCE
I. Touet
Affiliation:
CEA, Direction des Technologies Avancées, 38054 Grenoble CEDEX, FRANCE
G. Lormand
Affiliation:
GEMPPM UMR CNRS 5510, INSA, 69621 Villeurbanne CEDEX, FRANCE
Get access

Abstract

We have studied the effect of texture (X-ray diffraction pole figures) and grain morphology (Focus Ion Beam cross-sections) on the electromigration performances of copper damascene interconnects. Three different metallizations have been characterized : Chemical Vapor Deposition copper deposited on TiN (process A) and electroplated copper deposited either on Ta (process B) or TaN (process C). The reliability performance of these interconnects has been evaluated using both Wafer Level Reliability (WLR) and Package Level Reliability (PLR) tests on 4 and 0.6 νm wide lines using single metal level test structures. On the basis of the activation energy values and failure analysis observations, we concluded that interfacial diffusion plays a key role in the electromigration phenomenon for processes B and C whereas grain boundaries seem to be the active diffusion path for process A. The existence of several failure mechanisms during electromigration tests (interfacial or grain boundary diffusions), the impact of the damascene architecture on microstructure (sidewall textures and non columnar grain shapes) and the copper propensity for twinning seem to mask the impact of texture on the electromigration reliability of copper damascene interconnects.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 612: Symposium D – Materials, Technology & Reliability for Advanced Interconnects.. , 2000 , D2.4.1
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Lloyd, J.R. and Clement, J.J., Thin Solid Films 262 (1995) 135–141 10.1016/0040-6090(94)05806-7Google Scholar
[2] Vaidya, S. and Sinha, A.K., Thin Solid Films 75 (1981) 253–259 10.1016/0040-6090(81)90404-1Google Scholar
[3] Knorr, D.B. and Tracy, D.P., Appl. Phys. Lett. 59 (25) (1991) 3241–3243 10.1063/1.105745Google Scholar
[4] Vanasupa, L., Electrochemical and Solid-State Letters, 2 (6) (1999) 275–277 10.1149/1.1390809Google Scholar
[5] Lingk, C. et al. , Appl. Phys. Lett. 74 (5) (1999) 682–684 10.1063/1.122986Google Scholar
[6] Arnaud, L. et al. , Microelectronics Reliability 38 (1998) 1029–1034 10.1016/S0026-2714(98)00122-XGoogle Scholar
[7] Giroux, F. et al. , Proc. IEEE Int. Conf. of Microelectronics Test Structures (1995) 229 Google Scholar
[8] Glickman, E. and Nathan, M., J. of Appl. Phys. 80 (7) (1996) 3782–3791 10.1063/1.363330Google Scholar
[9] Burton, B. and Greenwood, G.W., Metal Science Journal 4 (1970) 215–218 10.1179/msc.1970.4.1.215Google Scholar
[10] Gupta, D., Mat. Chem. Phys. 41 (1995) 199 10.1016/0254-0584(95)01514-0Google Scholar
[11] Surholt, T., Phys Rev. B 50 (1994) 3577 10.1103/PhysRevB.50.3577Google Scholar
[12] Keller, R. R. et al. , Journal of Electronic Materials 26 (1997) 996–1001 10.1007/s11664-997-0236-zGoogle Scholar