Hostname: page-component-848d4c4894-r5zm4 Total loading time: 0 Render date: 2024-06-18T05:01:01.867Z Has data issue: false hasContentIssue false
  • English
  • Français

Electron Drift Mobility in a-Si:H Prepared by Hot-Wire Deposition

Published online by Cambridge University Press:  15 February 2011

Qing Gu ,
E. A. Schiff ,
R. S. Crandall ,
E. Iwaniczko  and
B. Nelson
Qing Gu
Affiliation:
Department of Physics, Syracuse University, Syracuse, NY 13244–1130, USA
E. A. Schiff
Affiliation:
Department of Physics, Syracuse University, Syracuse, NY 13244–1130, USA
R. S. Crandall
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401, USA
E. Iwaniczko
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401, USA
B. Nelson
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401, USA
Get access

Abstract

We have measured the electron drift mobility in a-Si:H prepared by hot wire (HW) deposition using photocarrier time-of-flight. Initial work has shown that light-soaked HW material can have much better ambipolar diffusion lengths than the plasma-deposited material following extended light soaking. In a sample with about 2% H-concentration in the intrinsic layer, we find that the electron drift mobility is quite different from that of a-Si:H alloys prepared by normal glow-discharge CVD, even allowing for the reduced bandgap of the hot Wire material. This result challenges the principle that the bandgap of optimized amorphous silicon based material is sufficient to predict the electron drift mobility.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 377: Symposium A – Amorphous Silicon Technology 1995 , 1995 , 437
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Karg, F., Krühler, W., Möller, M. and Klitzing, K. v., J. Appl. Phys, 60 (6), 2016 (1986).Google Scholar
[2] Bauer, G. H., Nebel, C. E., Schubert, M. B. and Schumn, G., Mat. Res. Soc. Symp. Proc., 149, 485 (1989)Google Scholar
[3] Wang, Qi, Antoniadis, Homer, Schiff, E. A. and Guha, S., Phys. Rev. B, 47, 9435 (1993).Google Scholar
[4] Guha, S., Payson, J. S., Agarwal, S. C. and Ovshinsky, S. R., J. Non-Cryst. Solids, 97&98, 1455 (1987).Google Scholar
[5] Vanderhaghen, R. and Longeaud, C., J. Non-Cryst. Solids, 114, 540 (1989).Google Scholar
[6] Maruyama, E., Yoshimine, Y., Terakawa, A., Sayama, K., Ninomiya, K., Hishikawa, Y., Tarui, H., Tsuda, S., Nakano, S. and Kuwano, Y., Mat. Res. Soc. Symp. Proc., 297, 821 (1993)Google Scholar
[7] Mahan, A. H. and Vanecek, M., in Amorphous Silicon Materials and Solar Cells, edited by Stafford, B. L. (American Institute of Physics, New York, 1991), p. 195.Google Scholar
[8] Crandall, R. S., in Photovoltaic Advanced Research & Development Project: AIP Conference Proceedings No. 268, edited by Noufi, R. (American Institute of Physics, New York, 1992), p. 81.Google Scholar