Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-17T20:46:40.352Z Has data issue: false hasContentIssue false
  • English
  • Français

Precise Absorbent ink Deposition and Optical Inspection System

Published online by Cambridge University Press:  19 December 2011

Andreas Willert ,
Joerg Lucas ,
Enrico Sowade ,
Christian Rahnfeld ,
Andreas Heilmann  and
Reinhard R. Baumann
Andreas Willert
Affiliation:
Fraunhofer Institute for Electronic Nano Systems ENAS, Printed Functionalities, Technologie-Campus 3, 09126 Chemnitz, Germany
Joerg Lucas
Affiliation:
Fraunhofer Institute for Mechanics of Materials IWM, Interface and Surface Technology, Walter-Hülse-Straße 1, 06120 Halle, Germany
Enrico Sowade
Affiliation:
Chemnitz University of Technology, Digital Printing and Imaging, Reichenhainer Str. 70, 09126 Chemnitz, Germany
Christian Rahnfeld
Affiliation:
Chemnitz University of Technology, Digital Printing and Imaging, Reichenhainer Str. 70, 09126 Chemnitz, Germany
Andreas Heilmann
Affiliation:
Fraunhofer Institute for Mechanics of Materials IWM, Interface and Surface Technology, Walter-Hülse-Straße 1, 06120 Halle, Germany
Reinhard R. Baumann
Affiliation:
Fraunhofer Institute for Electronic Nano Systems ENAS, Printed Functionalities, Technologie-Campus 3, 09126 Chemnitz, Germany Chemnitz University of Technology, Digital Printing and Imaging, Reichenhainer Str. 70, 09126 Chemnitz, Germany
Get access

Abstract

Foils from the ethylene-tetrafluoroethylene (ETFE) copolymer are used as transparent, humidity resistant and UV-stabile facade and roof coverings, e.g. for stadia, indoor swimming pools or greenhouses [1]. With pneumatically supported cushions, large translucent structures can be realized. Until now, they are assembled through a thermal welding process [2]. The development of welding techniques using laser irradiation is under way.

Laser welding of transparent polymer foils requires an optical absorber placed in the interface between the two welding pairs. Usually, dye molecules with absorption properties adapted to the laser wavelength are used as absorbers. At a well-defined temperature, the dye molecules will be chemically modified, and transparent laser welding seams can be achieved. To get reproducible laser welding results, a homogenous layer of absorbent molecules or materials at the welding interface have to be realized, which is often very hard to achieve by wet deposition of dye molecules dispersed in a solution.

In our contribution, we report on an inkjet printing system that can be mounted on a R2R manufacturing setup. The main challenge to this approach is to find the right ink that is compatible with this highly hydrophobic ETFE foil. Therefore, both the pretreatment of the substrate as well as the utilization of different inkjet technologies are dealt with in this contribution. It is demonstrated that the inkjet printing of a laser absorbent ink in a defined way onto the substrate is possible.

For quality assurance, an optical inspection system has been developed to ensure a proper deposition of material. This ensures the quality control for the inkjet printing process of the special functional material. In that part the results of the comparison of the use of a dedicated 14‑bit grey level CCD line camera is compared to a high quality webcam.

Laser irradiation of the foil with printed laser absorbent lines together with the untreated joining partner was performed by a continuous wave diode laser at a wavelength of 808 nm using a defocused laser spot. A nearly transparent welding seam was achieved. Mechanical tensile tests of the laser welding seams have demonstrated that their tensile strength is comparable to conventional thermal welding seams.

Keywords

absorbentink-jet printingoptical properties
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1285: Symposium D – Challenges in Roll-to-Roll (R2R) Fabrication for Electronics and Other Functionalities , 2011 , mrsf10-1285-d02-09
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Moritz, K., „Bauweisen der ETFE-Foliensysteme“, Stahlbau, 76(5), 336–342. doi: 10.1002/stab.200790052 (2007)Google Scholar
2. Robinson-Gayle, S., “ETFE foil cushions in roofs and atria”, Construction and Building Materials, 15(7), 323–327 doi: 10.1016/S0950-0618(01)00013-7. (2001)Google Scholar
3. Tanno, S., “ETFE foil cushions as an alternative to glass for atriums and rooflights.”, International Conference on Building, Envelope Systems and Technologys (ICBEST) 97 Conference, CWCT, Bath, UK (1997)Google Scholar
4. Schöne, L., “Bauen mit ETFE-Folien – Ein Praxisbericht.“, Stahlbau, 76(5), 305–313. doi: 10.1002/stab.200710036 (2007)Google Scholar
5. O’Hagan, D., “Understanding organofluorine chemistry. An introduction to the C-F bond.”, Chemical Society reviews, 37(2), 308–19. doi: 10.1039/b711844a (2008)Google Scholar
6. Biffinger, J. C., Kim, H. W., DiMagno, S. G., „The polar hydrophobicity of fluorinated compounds”, Chembiochem: a European journal of chemical biology, 5(5), 622–7. doi: 10.1002/cbic.200300910 (2004)Google Scholar
7. Haberstroh, E., Hoffmann, W.-M., “Laser welding of micro plastic parts”, International Society for Optical Engineering (SPIE), Proceedings of Photonics West Conference, San Jose (CA), USA (2007)Google Scholar
8. Neuber, M., Heilmann, A., “Laser welding of polymer foils with gold nanoparticles as optical absorber”, submitted Google Scholar