Hostname: page-component-848d4c4894-wg55d Total loading time: 0 Render date: 2024-05-23T18:37:49.802Z Has data issue: false hasContentIssue false
  • English
  • Français

Rapid Thermal/Plasma Processing for In-Situ Dielectric Engineering (Invited)

Published online by Cambridge University Press:  28 February 2011

Mehrdad M. Moslehi
Mehrdad M. Moslehi*
Affiliation:
Center for Integrated Systems, Stanford University, Stanford, California 94305
Get access

Abstract

Rapid thermal processing of silicon in oxygen and ammonia ambients is an attractive technique for the growth of thin dielectrics such as silicon nitride, silicon dioxide, nitrided oxides, oxidized nitrides, and application-specific (composition-tailored) insulators. Multicycle rapid thermal growth processes are suitable for dielectric engineering and in-situformation of thin layered insulators with a variety of controllable oxygen and nitrogen compositional depth profiles by appropriate design of the temperature and ambient gas cycles. The growth and electrical properties of various dielectrics rapidly grown by the state-of-the-art techniques and their corresponding device performance are examined. Rapid thermal processing and microwave plasma generation have been combined in a novel custom-made multipurpose reactor for rapid plasma-enhanced multiprocessing of Si, Ge, and GaAs. Thin germanium nitride dielectrics can be formed by rapid thermal or plasma nitridation for germanium CMOS applications. Combination of in-situ rapid plasma nitridation followed by silicon nitride deposition may prove to be effective for MIS structures and surface passivation on GaAs. These new applications of rapid thermal/plasma processing are additional steps towards realization of fully RTP-based Si VLSI fabrication processes and development of new devices and technologies on other semiconductor materials.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 92: Symposium B – Rapid Thermal Processing of Electronic Materials , 1987 , 73
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Narayan, J., Holland, O., Eby, R., Wortman, J., Ozguz, V., and Rozgonyi, G., Appl.Phys.Lett. 43, 957 (1983).Google Scholar
[2] Yachi, T., IEEE Electron Dev. Lett. EDL-5, 217 (1984).Google Scholar
[3] Hara, T., Suzuki, H., and Furukawa, M., Jpn. J. Appl. Phys. 23, L452 (1984).Google Scholar
[4] Faith, T. and Wu, C., Appl. Phys. Lett. 45, 470 (1984).Google Scholar
[5] Reed, M., Fishbein, B., and Plummer, J., Appl. Phys. Lett. 46, 400 (1985).Google Scholar
[6] Weinberg, Z., Young, D., Calise, J., Cohen, S., DeLuca, J., and Deline, V., Appl. Phys. Lett. 45, 1204 (1984).Google Scholar
[7] Moslehi, M. and Saraswat, K., IEEE Trans. Electron Dev. ED-32, 106 (1985).Google Scholar
[8] Moslehi, M., Fu, C., Saraswat, K., 1985 VLSI Technol. Symp. Dig. of Tech. Papers, 14 (1985).Google Scholar
[9] Moslehi, M., Saraswat, K., and Shatas, S., Appl. Phys. Lett. 47, 1113 (1985).Google Scholar
[10] Moslehi, M., Shatas, S., and Saraswat, K., Proc. the Fifth International Symp. on Si Mat.Sci. and Technol. ECS 86–4, 379 (1986).Google Scholar
[11] Moslehi, M., Shatas, S., and Saraswat, K., Appl. Phys. Lett. 47, 1353 (1985).Google Scholar
[12] Moslehi, M., Shatas, S., Saraswat, K., and Meindl, J., IEEE Trans. Electron Dev. ED-34,(June 1987).Google Scholar
[13] Moslehi, M., Saraswat, K., and Shatas, S., Proc. MRS on Rapid Thermal Processing of Electronic Mat. (this volume), (1987).Google Scholar