Hostname: page-component-848d4c4894-4hhp2 Total loading time: 0 Render date: 2024-06-01T07:14:01.198Z Has data issue: false hasContentIssue false
  • English
  • Français

Reduction of Selected Metal Oxides in a Thermal Plasma Produced by a Nontransferred ARC Torch

Published online by Cambridge University Press:  25 February 2011

Brent A. Detering ,
James A. Batdorf  and
Chien M. Wai
Brent A. Detering
Affiliation:
Chemistry Dept., University of Idaho, Moscow, ID 83843
James A. Batdorf
Affiliation:
Idaho National Engineering Laboratory, EG&G Idaho, Inc.P.O. Box 1625, Idaho Falls, ID 83415
Chien M. Wai
Affiliation:
Chemistry Dept., University of Idaho, Moscow, ID 83843
Get access

Abstract

Plasma flow field temperatures are determined in a nontransferred arc plasma using emission spectroscopy. This technique is then utilized to identify thermal decomposition and reduction products produced in the plasma plume when metal oxide particles are injected into the plasma arc. The processed particles are then studied using AAS, SEM, EDS and XRD to characterize the chemical changes that have occurred in the particles. A Fourier transform method is used to study changes in particle morphology.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 98: Symposium K – Plasma Processing and Synthesis of Materials II , 1987 , 359
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Camacho, S. L., Eschenbach, R. C., and Feinman, J., “Assessment of Development Problems and Future Prospects,” Plasma Technology in Metallurgical Processing, Feinman, J., ed., Warrendale: Iron and Steel Society, Inc., 1987.Google Scholar
2. MacRae, D. R., “Application of Plasma Technology to Ferroalloy Processing,” Plasma Technology in Metallurgical Processing, Feinman, J., ed., Warrendale: Iron and Steel Society, Inc., 1987.Google Scholar
3. Reid, K. J. and Camacho, S. L., “Historical Review,” Plasma Technology in Metallurgical Processing, Feinman, J., ed., Warrendale: Iron and Steel Society, Inc., 1987.Google Scholar
4. Torch operating conditions were chosen to give maximum power input to the plasma with minimum electrode wear.Google Scholar
5. OMA III, Model 1460-GID, Optical Multichannel Analyzer, EG&G Princeton Applied Research, Princeton, NJ.Google Scholar
6. Detering, B.A., PhD thesis, University of Idaho, 1987.Google Scholar
7. Boulos, M., Fauchais, P., and Pfender, E., “Diagnostic Techniques in Thermal Plasma Processing”, U.S. Department of Energy, Office of Energy Research, Office of Basic Energy Sciences, Washington, D.C., February 1986, DOE/ER-0270, pp 190–195.Google Scholar