No CrossRef data available.
Article contents
Circularity in product engineering – towards a forward-looking approach across product generations
Published online by Cambridge University Press: 16 May 2024
Abstract
Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.
To enable a truly circular economy in product engineering, the development of products in generations must be considered. Thus, we strive to enable a forward-looking circularity approach, proposing the integration of system generation engineering (SGE) with circular economy principles. By analysing the qualitative interrelations among product generations driven by distinct value preservation strategies on various value creation tiers ("R-strategies"), we extend prior SGE research to advance model theory and support practical application of circular product engineering.
Keywords
- Type
- Design Theory and Research Methods
- Information
- Creative Commons
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.- Copyright
- The Author(s), 2024.
References
adidas (2023), “Primeblue”, available at: https://www.adidas.de/en/primeblue (accessed 15 November 2023).Google Scholar
Aguiar, M.F., Mesa, J.A., Jugend, D., Pinheiro, M.A.P. and Fiorini, P.D.C. (2022), “Circular product design: strategies, challenges and relationships with new product development”, Management of Environmental Quality: An International Journal, Vol. 33 No. 2, pp. 300–329. https://doi.org/10.1108/MEQ-06-2021-0125.CrossRefGoogle Scholar
Albæk, J.K., Shahbazi, S., McAloone, T.C. and Pigosso, D. (2020), “Circularity evaluation of alternative concepts during early product design and development”, Sustainability (Switzerland), Vol. 12 No. 22, pp. 1–25. https://doi.org/10.3390/su12229353.Google Scholar
Albers, A., Bursac, N. and Wintergerst, E. (2015), “Produktgenerationsentwicklung – Bedeutung und Herausforderungen aus einer entwicklungsmethodischen Perspektive”, Stuttgarter Symposium für Produktentwicklung, Fraunhofer IAO, Stuttgart, Germany, pp. 1–10.Google Scholar
Albers, A. and Gausemeier, J. (2012), “Von der fachdisziplinorientierten Produktentwicklung zur Vorausschauenden und Systemorientierten Produktentstehung”, in Anderl, R., Eigner, M., Sendler, U. and Stark, R. (Eds.), Smart Engineering, acatech DISKUSSION, Springer, Berlin/Heidelberg, Germany, pp. 17–29. https://doi.org/10.1007/978-3-642-29372-6_3.Google Scholar
Albers, A., Kempf, C., Haberkern, P., Mandel, C. and Kubin, A., et al. . (2024, Manuscript submitted for publication), “The Reference System in Product Generation Engineering: Structuring Reference System Elements for Advanced Systems Engineering Based on the System Triple”, Design Science.Google Scholar
Albers, A. and Meboldt, M. (2007), “IPEMM – Integrated Product Development Process Management Model, Based on Systems Engineering and Systematic Problem Solving”, Proceedings of ICED 2007, the 16th International Conference on Engineering Design, The Design Society, Glasgow, 611-619.Google Scholar
Albers, A. and Rapp, S. (2022), “Model of SGE: System Generation Engineering as Basis for Structured Planning and Management of Development”, in Krause, D. and Heyden, E. (Eds.), Design Methodology for Future Products: Data Driven, Agile and Flexible, Springer International Publishing, Cham, Germany, pp. 27–46. https://doi.org/10.1007/978-3-030-78368-6_2.CrossRefGoogle Scholar
Albers, A., Rapp, S., Birk, C. and Bursac, N. (2017), “Die Frühe Phase der PGE - Produktgenerations-entwicklung”, Stuttgarter Symposium für Produktentwicklung 2017, Univ. Stuttgart, Stuttgart, pp. 345–354.Google Scholar
Albers, A., Rapp, S., Spadinger, M., Richter, T. and Birk, C., et al. . (2019), “The Reference System in the Model of PGE: Proposing a Generalized Description of Reference Products and their Interrelations”, Proceedings of the 22nd International Conference on Engineering Design (ICED19), pp. 1693–1702. https://doi.org/10.1017/dsi.2019.175.CrossRefGoogle Scholar
Becker, J., Beverungen, D., Winter, M. and Menne, S. (Eds.) (2019), Umwidmung und Weiterverwendung von Traktionsbatterien: Szenarien, Dienstleistungen und Entscheidungsunterstützung, Springer Vieweg, Wiesbaden/Heidelberg, Germany. https://doi.org/10.1007/978-3-658-21021-2.CrossRefGoogle Scholar
Bender, B. and Gericke, K. (2021), Pahl/Beitz Konstruktionslehre, Springer, Berlin/Heidelberg, Germany. https://doi.org/10.1007/978-3-662-57303-7.CrossRefGoogle Scholar
Blomsma, F., Pieroni, M., Kravchenko, M., Pigosso, D.C. and Hildenbrand, J., et al. . (2019), “Developing a circular strategies framework for manufacturing companies to support circular economy-oriented innovation”, Journal of Cleaner Production, Vol. 241, p. 118271. https://doi.org/10.1016/j.jclepro.2019.118271.CrossRefGoogle Scholar
Bocken, N.M.P., Pauw, I. de, Bakker, C. and van der Grinten, B. (2016), “Product design and business model strategies for a circular economy”, Journal of Industrial and Production Engineering, Vol. 33 No. 5, pp. 308–320. https://doi.org/10.1080/21681015.2016.1172124.CrossRefGoogle Scholar
Breimann, R., Rennpferdt, C., Wehrend, S., Kirchner, E. and Krause, D. (2023), “Exploiting the sustainability potential of modular products by integrating r-imperatives into product life phases”, Proceedings of the Design Society: 24th International Conference on Engineering Design (ICED23), The Design Society, Glasgow, pp. 1785–1794. https://doi.org/10.1017/pds.2023.179.Google Scholar
Cudok, A., Neugebauer, L. and Vietor, T. (2022), “Increasing Acceptance for Refurbished Products at the Example of E-Cargo Bikes”, Procedia CIRP, Vol. 105, pp. 571–576. https://doi.org/10.1016/j.procir.2022.02.095.CrossRefGoogle Scholar
Diaz, A., Reyes, T. and Baumgartner, R.J. (2022), “Implementing circular economy strategies during product development”, Resources, Conservation and Recycling, Vol. 184, p. 106344. https://doi.org/10.1016/j.resconrec.2022.106344.CrossRefGoogle Scholar
Diaz, A., Schöggl, J.-P., Reyes, T. and Baumgartner, R.J. (2021), “Sustainable product development in a circular economy: Implications for products, actors, decision-making support and lifecycle information management”, Sustainable Production and Consumption, Vol. 26, pp. 1031–1045. https://doi.org/10.1016/j.spc.2020.12.044.CrossRefGoogle Scholar
Dokter, G., van Stijn, A., Thuvander, L. and Rahe, U. (2020), “Cards for circularity: Towards circular design in practice”, IOP Conference Series: Earth and Environmental Science, Vol. 588 No. 4, p. 42043. https://doi.org/10.1088/1755-1315/588/4/042043.CrossRefGoogle Scholar
Eigner, M., Roubanov, D. and Zafirov, R. (2014), Modellbasierte virtuelle Produktentwicklung, Springer, Berlin/Heidelberg, Germany. https://doi.org/10.1007/978-3-662-43816-9.CrossRefGoogle Scholar
Foundation, Ellen MacArthur (2013), “Towards the Circular Economy: Vol. 1: Economic and Business Rationale for an accelerated Transition”, available at: https://www.emf.org/towards-the-circular-economy-vol-1-an-economic-and-business-rationale-for-an (accessed 15 November 2023).Google Scholar
Foundation, Ellen MacArthur (2015), “Growth within: a circular economy vision for a competitive Europe”, available at: https://www.emf.org/growth-within-a-circular-economy-vision-for-a-competitive-europe.Google Scholar
Geissdoerfer, M., Savaget, P., Bocken, N.M. and Hultink, E.J. (2017), “The Circular Economy – A new sustainability paradigm?”, Journal of Cleaner Production, Vol. 143, pp. 757–768. https://doi.org/10.1016/j.jclepro.2016.12.048.CrossRefGoogle Scholar
Gräßler, I. and Hesse, P. (2022), “Approach to Sustainability-Based Assessment of Solution Alternatives in Early Stages of Product Engineering”, Proceedings of the DESIGN2022, 17th International Design Conference, The Design Society, Glasgow, pp. 1001–1010. https://doi.org/10.1017/pds.2022.102.Google Scholar
Hollander, M.C. den, Bakker, C.A. and Hultink, E.J. (2017), “Product Design in a Circular Economy: Development of a Typology of Key Concepts and Terms”, Journal of Industrial Ecology, Vol. 21 No. 3, pp. 517–525. https://doi.org/10.1111/jiec.12610.CrossRefGoogle Scholar
Kadner, S., Kobus, J., Hansen, E.G., Akinci, S. and Elsner, P., et al. . (2021), Circular Economy Roadmap für Deutschland, acatech/SYSTEMIQ, Munich/London. https://doi.org/10.48669/ceid_2021-3.CrossRefGoogle Scholar
Kirchherr, J., Reike, D. and Hekkert, M. (2017), “Conceptualizing the circular economy: An analysis of 114 definitions”, Resources, Conservation and Recycling, Vol. 127, pp. 221–232. 10.1016/j.resconrec.2017.09.005.Google Scholar
Mangun, D. and Thurston, D.L. (2002), “Incorporating component reuse, remanufacture, and recycle into product portfolio design”, IEEE Transactions on Engineering Management, Vol. 49 No. 4, pp. 479–490. https://doi.org/10.1109/TEM.2002.807292.CrossRefGoogle Scholar
Pigosso, D. and McAloone, T. (2017), “How can design science contribute to a circular economy?”, Proceedings of the 21st International Conference on Engineering Design, The Design Society, Glasgow.Google Scholar
Potting, J., Hekkert, M., Worrell, E. and Hanemaaijer, A. (2017), Circular Economy: measuring innovation in the product chain, PBL Netherlands Environmental Assessment Agency, The Hague.Google Scholar
Arcos, Pozo, Balkenende, B., Bakker, A.R., and Sundin, C.A., E. (2018), “Product design for a circular economy: Functional recovery on focus”, Proceedings of the DESIGN 2018, 15th International Design Conference, The Design Society, Glasgow, pp. 2727–2738. https://doi.org/10.21278/idc.2018.0214.CrossRefGoogle Scholar
Reike, D., Vermeulen, W.J. and Witjes, S. (2018), “The circular economy: New or Refurbished as CE 3.0? — Exploring Controversies in the Conceptualization of the Circular Economy through a Focus on History and Resource Value Retention Options”, Resources, Conservation and Recycling, Vol. 135, pp. 246–264. https://doi.org/10.1016/j.resconrec.2017.08.027.CrossRefGoogle Scholar
Ropohl, G. (Ed.) (1975), Systemtechnik - Grundlagen und Anwendung, Hanser, Munich, Germany.Google Scholar
Schulze, V., Aurich, J.C., Groche, P., Mantwill, F. and Albers, A., et al. . (2023), “Update-Factory für ein industrielles Produkt-Update. Ein Beitrag zur Kreislaufwirtschaft”, available at: https://wgp.de/wp-content/uploads/03_Impulspaper_WBK_2021-09_ES_WEB.pdf (accessed 15 November 2023).Google Scholar
Shahbazi, S. and Jönbrink, A.K. (2020), “Design Guidelines to Develop Circular Products: Action Research on Nordic Industry”, Sustainability, Vol. 12 No. 9, p. 3679. https://doi.org/10.3390/su12093679.CrossRefGoogle Scholar
Shevchenko, T. and Cluzel, F. (2023), “A circular product design toolkit: Methodological background, basic principles and building blocks”, Proceedings of the Design Society: 24th International Conference on Engineering Design (ICED23), The Design Society, Glasgow, pp. 59–68. https://doi.org/10.1017/pds.2023.7.Google Scholar
Singh, J. and Ordoñez, I. (2016), “Resource recovery from post-consumer waste: important lessons for the upcoming circular economy”, Journal of Cleaner Production, Vol. 134, pp. 342–353. https://doi.org/10.1016/j.jclepro.2015.12.020.CrossRefGoogle Scholar
Stölzle, M., Roth, D. and Kreimeyer, M. (2023), “Impact of the implementation of Design for Circular Economy features on the product development process”, Proceedings of the 34th Symposium Design for X (DFX2023), The Design Society, Glasgow, pp. 135–142. https://doi.org/10.35199/dfx2023.14.Google Scholar
Tolio, T., Bernard, A., Colledani, M., Kara, S. and Seliger, G., et al. . (2017), “Design, management and control of demanufacturing and remanufacturing systems”, CIRP Annals - Manufacturing Technology, Vol. 66 No. 2, pp. 585–609. https://doi.org/10.1016/j.cirp.2017.05.001.CrossRefGoogle Scholar
Wang, W., Wang, Y., Mo, D. and Tseng, M. (2017), “Component Reuse in Remanufacturing Across Multiple Product Generations”, Procedia CIRP. Proceedings of the 50th CIRP Conference on Manufacturing Systems, Elsevier B.V, pp. 704–708. https://doi.org/10.1016/j.procir.2017.02.033.Google Scholar
Zomer, T., McAloone, T.C. and Pigosso, D.C.A. (2022), “To What Extent Is Circular Product Design Supporting Carbon Reduction Strategies? An Analysis of Nordic Manufacturing Firms within the Science-Based Targets Initiative”, Proceedings of the DESIGN2022, 17th International Design Conference, The Design Society, Glasgow, pp. 1189–1198. https://doi.org/10.1017/pds.2022.121.Google Scholar
You have
Access
Open access