Hostname: page-component-848d4c4894-wzw2p Total loading time: 0 Render date: 2024-06-12T13:01:23.970Z Has data issue: false hasContentIssue false
  • English
  • Français

A comparative study of VR CAD modelling tools for design

Published online by Cambridge University Press:  16 May 2024

Aman Kukreja ,
Christopher Michael Jason Cox ,
James Gopsill  and
Chris Snider
Aman Kukreja*
Affiliation:
University of Bristol, United Kingdom
Christopher Michael Jason Cox
Affiliation:
University of Bristol, United Kingdom
James Gopsill
Affiliation:
University of Bristol, United Kingdom
Chris Snider
Affiliation:
University of Bristol, United Kingdom
*
aman.kukreja@bristol.ac.uk

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

With recent advancements in Virtual reality (VR), 3D design in VR has gained significant interest from both academia and industries. However, the development of these VR CAD tools is either skewed towards the creative industry or simply mimicking conventional CAD. This paper presents three different tools, analyzes them, and compares their capabilities over various performance parameters. The paper finally suggests where these tools can be used in the design process and some critical pathways for developing VR-based CAD modeling software for practical use in the engineering design industry.

Keywords

virtual reality (VR)computer-aided design (CAD)engineering designvirtual prototyping
Type
Design Methods and Tools
Information
Proceedings of the Design Society , Volume 4: DESIGN 2024 , May 2024 , pp. 643 - 652
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2024.

References

6sense. (n.d.). “The Game Engine Landscape Report”, 2022, available at: https://6sense.com/tech/game-development/unity-vs-unrealengine (accessed 14 November 2023).Google Scholar
Alkemade, R., Verbeek, F.J. and Lukosch, S.G. (2017), “On the Efficiency of a VR Hand Gesture-Based Interface for 3D Object Manipulations in Conceptual Design”, International Journal of Human–Computer Interaction, Vol. 33 No. 11, pp. 882–901, https://dx.doi.org/10.1080/10447318.2017.1296074.CrossRefGoogle Scholar
Bourdot, P., Convard, T., Picon, F., Ammi, M., Touraine, D. and Vézien, J.-M. (2010), “VR–CAD integration: Multimodal immersive interaction and advanced haptic paradigms for implicit edition of CAD models”, Computer-Aided Design, Elsevier Ltd, Vol. 42 No. 5, pp. 445–461, https://dx.doi.org/10.1016/j.cad.2008.10.014.Google Scholar
Chang, Y., Kao, J.-Y. and Wang, Y.-Y. (2022), “Influences of virtual reality on design creativity and design thinking”, Thinking Skills and Creativity, Elsevier Ltd, Vol. 46 No. September, p. 101127, https://dx.doi.org/10.1016/j.tsc.2022.101127.Google Scholar
Eswaran, M. and Bahubalendruni, M.V.A.R. (2022), “Challenges and opportunities on AR/VR technologies for manufacturing systems in the context of industry 4.0: A state of the art review”, Journal of Manufacturing Systems, Elsevier Ltd, Vol. 65 No. September, pp. 260–278, https://dx.doi.org/10.1016/j.jmsy.2022.09.016.CrossRefGoogle Scholar
Feeman, S.M., Wright, L.B. and Salmon, J.L. (2018), “Exploration and evaluation of CAD modeling in virtual reality”, Computer-Aided Design and Applications, Vol. 15 No. 6, pp. 892–904, https://dx.doi.org/10.1080/16864360.2018.1462570.CrossRefGoogle Scholar
Horvat, N., Martinec, T., Lukačević, F., Perišić, M.M. and Škec, S. (2022), “The potential of immersive virtual reality for representations in design education”, Virtual Reality, Springer London, Vol. 26 No. 3, pp. 1227–1244, https://dx.doi.org/10.1007/s10055-022-00630-w.Google Scholar
Ibrahim, R. and Pour Rahimian, F. (2010), “Comparison of CAD and manual sketching tools for teaching architectural design”, Automation in Construction, Elsevier B.V., Vol. 19 No. 8, pp. 978–987, https://dx.doi.org/10.1016/j.autcon.2010.09.003.Google Scholar
Keefe, D.F., Zeleznik, R.C. and Laidlaw, D.H. (2007), “Drawing on Air: Input Techniques for Controlled 3D Line Illustration”, IEEE Transactions on Visualization and Computer Graphics, Vol. 13 No. 5, pp. 1067–1081, https://dx.doi.org/10.1109/TVCG.2007.1060.CrossRefGoogle ScholarPubMed
Kim, H. and Hyun, K.H. (2022), “Understanding Design Experience in Virtual Reality for Interior Design Process”, Proceedings of the 27th Conference on Computer Aided Architectural Design Research in Asia (CAADRIA) [Volume 1], Vol. 1, pp. 59–68, https://dx.doi.org/10.52842/conf.caadria.2022.1.059.CrossRefGoogle Scholar
Lau, M., Hirose, M., Ohgawara, A., Mitani, J. and Igarashi, T. (2012), “Situated Modeling: A shape-stamping interface with tangible primitives”, Proceedings of the 6th International Conference on Tangible, Embedded and Embodied Interaction, TEI 2012, ACM, New York, NY, USA, pp. 275–282, https://dx.doi.org/10.1145/2148131.2148190.Google Scholar
Lorensen, W.E. and Cline, H.E. (1987), “Marching cubes: A high resolution 3D surface construction algorithm”, ACM SIGGRAPH Computer Graphics, Vol. 21 No. 4, pp. 163–169, https://dx.doi.org/10.1145/37402.37422.CrossRefGoogle Scholar
Mathias, D., Hicks, B. and Snider, C. (2019), “Hybrid Prototyping: Pure Theory or a Practical Solution to Accelerating Prototyping Tasks?”, Proceedings of the Design Society: International Conference on Engineering Design, Vol. 1 No. 1, pp. 759–768, https://dx.doi.org/10.1017/dsi.2019.80.Google Scholar
Nandy, A., Smith, J., Jennings, N., Kuniavsky, M., Hartmann, B. and Goucher-Lambert, K. (2023), “VR OR NOT? INVESTIGATING INTERFACE TYPE AND USER STRATEGIES FOR INTERACTIVE DESIGN SPACE EXPLORATION”, Proceedings of the Design Society, Vol. 3, pp. 3851–3860, https://dx.doi.org/10.1017/pds.2023.386.CrossRefGoogle Scholar
Nanjappan, V., Uunila, A., Vaulanen, J., Välimaa, J. and Georgiev, G. V. (2023), “EFFECTS OF IMMERSIVE VIRTUAL REALITY IN ENHANCING CREATIVITY”, Proceedings of the Design Society, Vol. 3, pp. 1585–1594, https://dx.doi.org/10.1017/pds.2023.159.CrossRefGoogle Scholar
Reipschläger, P. and Dachselt, R. (2019), “DesignAR: Immersive 3D-Modeling Combining Augmented Reality with Interactive Displays”, Proceedings of the 2019 ACM International Conference on Interactive Surfaces and Spaces, ACM, New York, NY, USA, pp. 29–41, https://dx.doi.org/10.1145/3343055.3359718.CrossRefGoogle Scholar
Romeiro, F., Velho, L. and de Figueiredo, L.H. (2008), “Scalable GPU rendering of CSG models”, Computers & Graphics, Vol. 32 No. 5, pp. 526–539, https://dx.doi.org/10.1016/j.cag.2008.06.002.CrossRefGoogle Scholar
Seybold, C. and Mantwill, F. (2021), “3D sketches in virtual reality and their effect on development times”, Proceedings of the Design Society, Vol. 1 No. AUGUST, pp. 1–10, https://dx.doi.org/10.1017/pds.2021.1.CrossRefGoogle Scholar
Stãnculescu, L., Chaine, R. and Cani, M.-P. (2011), “Freestyle: Sculpting meshes with self-adaptive topology”, Computers & Graphics, Vol. 35 No. 3, pp. 614–622, https://dx.doi.org/10.1016/j.cag.2011.03.033.CrossRefGoogle Scholar
Tran, T., Foucault, G. and Pinquie, R. (2022), “Benchmarking of 3D Modelling in Virtual Reality”, Computer-Aided Design and Applications, Vol. 19 No. 6, pp. 1184–1190, https://dx.doi.org/10.14733/cadaps.2022.1184-1190.CrossRefGoogle Scholar
Trump, J. and Shealy, T. (2023), “EFFECTS OF EMBODIED AND SELF-REFLECTED VIRTUAL REALITY ON ENGINEERING STUDENTS’ DESIGN COGNITION ABOUT NATURE”, Proceedings of the Design Society, Vol. 3, pp. 1575–1584, https://dx.doi.org/10.1017/pds.2023.158.CrossRefGoogle Scholar
Xu, J., Hou, W., Sun, Y. and Lee, Y.S. (2018), “PLSP based layered contour generation from point cloud for additive manufacturing”, Robotics and Computer-Integrated Manufacturing, Elsevier Ltd, Vol. 49 No. May 2017, pp. 1–12, https://dx.doi.org/10.1016/j.rcim.2017.05.006.Google Scholar
Zhang, W., Peng, X., Leu, M.C. and Blackmore, D. (2005), “Accuracy and Computational Complexity Analysis of Design Models Created by Virtual Sculpting”, Computers and Information in Engineering, ASMEDC, pp. 63–69, https://dx.doi.org/10.1115/IMECE2005-80506.CrossRefGoogle Scholar
Zou, N., Gong, Q., Chai, Q. and Chai, C. (2023), “The role of virtual reality technology in conceptual design: positioning, applications, and value”, Digital Creativity, Vol. 34 No. 1, pp. 53–77, https://dx.doi.org/10.1080/14626268.2023.2166080.CrossRefGoogle Scholar