No CrossRef data available.
Article contents
Enabling the design for circularity through circularity measures: breaking down the R-strategies into useful design measures
Published online by Cambridge University Press: 16 May 2024
Abstract
Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.
Implementing a product design that incorporates circular economy aspects is a highly intricate task. Its complexity stems from various aspects, such as the interdependent solution space and the challenge to evaluate the impact of circular design in early development phases. To facilitate informed decision-making, a support system is necessary that integrates product-oriented circular measures, and derives their effect on the product's design and its circularity. We present an approach for such a support system, including its evaluation on the design of an automotive center console.
Keywords
- Type
- Systems Engineering and Design
- Information
- Creative Commons
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.- Copyright
- The Author(s), 2024.
References
Dér, A., Kaluza, Alexander, Reimer, L., Herrmann, C. and Thiede, S. (2022), “Integration of Energy Oriented Manufacturing Simulation into the Life Cycle Evaluation of Lightweight Body Parts”, International Journal of Precision Engineering and Manufacturing-Green Technology.CrossRefGoogle Scholar
Bhamra, T.A. (2004), “Ecodesign: The search for new strategies in product development”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 218 No. 5, pp. 557–569.CrossRefGoogle Scholar
Block, L., Werner, M., Spindler, H. and Schneider, B. (2023), “A Variability Model for Individual Life Cycle Paths in Life Cycle Engineering”, in Dröder, K. and Vietor, T. (Eds.), Future Automotive Production Conference 2022, Zukunftstechnologien für den multifunktionalen Leichtbau, 1st edition 2023, Springer Fachmedien Wiesbaden GmbH; Springer Vieweg, Wiesbaden, pp. 1–10.Google Scholar
Bougain, S. and Gerhard, D. (2017), “Integrating Environmental Impacts with SysML in MBSE Methods”, Procedia CIRP, Vol. 61, pp. 715–720.CrossRefGoogle Scholar
Bovea, M.D. and Pérez-Belis, V. (2018), “Identifying design guidelines to meet the circular economy principles: A case study on electric and electronic equipment”, Journal of Environmental Management, Vol. 228, pp. 483–494.CrossRefGoogle ScholarPubMed
Braungart, M. and McDonough, W. (2021), Cradle to Cradle: Einfach intelligent produzieren, Piper, Vol. 30467, 7. Auflage, ungekürzte Taschenbuchausgabe, Piper, München.Google Scholar
Cerdas, F., Thiede, S. and Herrmann, C. (2018), “Integrated Computational Life Cycle Engineering — Application to the case of electric vehicles”, CIRP Annals, Vol. 67 No. 1, pp. 25–28.CrossRefGoogle Scholar
DIN (2023), “CIRCULAR THINKING in Standards. Wie Normung eine Circular Economy unterstützen kann”, available at: https://www.din.de/resource/blob/952460/817ac05b868cad6959d3358b58127050/flyer-circular-economy-data.pdf (accessed 25 August 2023).Google Scholar
Dumitrescu, R., Albers, A., Riedel, O., Stark, R. and Gausemeier, J. (2021), Engineering in Deutschland – Status quo in Wirtschaft und Wissenschaft. Ein Beitrag zum Advanced Systems Engineering, Paderborn, 2021.Google Scholar
Eclipse (2023a), “Model Based Systems Engineering. Capella MBSE Tool”, available at: https://www.eclipse.org/capella/ (accessed 18 September 2023).Google Scholar
Eclipse (2023b), “Eclipse Modeling Framework (EMF)”, available at: https://eclipse.dev/modeling/emf/ (accessed 18 September 2023).Google Scholar
Ellen MacArthur Foundation (2013), Towards the Circular Economy: Economic and business rationale for an accelerated transition, available at: https://ellenmacarthurfoundation.org/publications (accessed 16 January 2023).Google Scholar
Ellen MacArthur Foundation (2023), “Methods”, available at: https://www.circulardesignguide.com/methods (accessed 20 November 2023).Google Scholar
Favi, C., Marconi, M., Germani, M. and Mandolini, M. (2019), “A design for disassembly tool oriented to mechatronic product de-manufacturing and recycling”, Advanced Engineering Informatics, Vol. 39, pp. 62–79.CrossRefGoogle Scholar
Fraunhofer IAO (2022), Lebenszyklusorientierte Entwicklung von Fahrzeug-Komponenten, Stuttgart, available at: https://www.iao.fraunhofer.de/de/presse-und-medien/aktuelles/lebenszyklusorientierte-entwicklung-von-fahrzeug-komponenten.html (accessed 10 November 2022).Google Scholar
Friedenthal, S., Moore, A. and Steiner, R. (2015), A practical guide to SysML: The systems modeling language, The MK/OMG Press, Third edition, Elsevier; Morgan Kaufmann, Waltham, MA.Google Scholar
Halstenberg, F.A., Lindow, K. and Stark, R. (2019), “Leveraging Circular Economy through a Methodology for Smart Service Systems Engineering”, Sustainability, Vol. 11 No. 13, p. 3517.CrossRefGoogle Scholar
Hauschild, M.Z., Kara, S. and Røpke, I. (2020), “Absolute sustainability: Challenges to life cycle engineering”, CIRP Annals, Vol. 69 No. 2, pp. 533–553.CrossRefGoogle Scholar
Hauschild, M.Z., Rosenbaum, R.K. and Olsen, S.I. (2018), Life cycle assessment: Theory and practice, Springer, Cham.CrossRefGoogle Scholar
Sillitto, Hillary, Martin, James, Mckinney, Dorothy, Griego, Regina and Jackson, Scott (2019), Systems Engineering and System Definitions.Google Scholar
INCOSE (2021), “SYSTEMS ENGINEERING VISION 2035. ENGINEERING SOLUTIONS FOR A BETTER WORLD”, available at: https://www.incose.org/docs/default-source/se-vision/incose-se-vision-2035.pdf?sfvrsn=e32063c7_10/se-vision-2025/incose-se-vision-2025.pdf?sfvrsn=602663c7_2 (accessed 21 November 2023).Google Scholar
Jeswiet, J. (2014), “Life Cycle Engineering”, in Laperrière, L., Reinhart, G., Chatti, S. and Tolio, T. (Eds.), CIRP encyclopedia of production engineering: With 85 tables, Springer reference, Springer, Berlin, pp. 757–758.CrossRefGoogle Scholar
Kadner, S., Kobus, J., Hansen, E., Akinci, S., Elsner, P., Hagelüken, C., Jaeger-Erben, M., Kick, M., Kwade, A., Kühl, C., Müller-Kirschbaum, T., Obeth, D., Schweitzer, E., Stuchtey, M., Vahle, T., Weber, T., Wiedemann, P., Wilts, H. and Wittken, R. von (2021), Circular Economy Roadmap für Deutschland, München, London, available at: https://www.acatech.de/publikation/circular-economy-roadmap-fuer-deutschland/ (accessed 7 November 2022).Google Scholar
Kuo, T.-C., Chiu, M.-C., Hsu, C.-W. and Tseng, M.-L. (2019), “Supporting sustainable product service systems: A product selling and leasing design model”, Resources, Conservation and Recycling, Vol. 146, pp. 384–394.CrossRefGoogle Scholar
Laurent, A., Molin, C., Owsianiak, M., Fantke, P., Dewulf, W., Herrmann, C., Kara, S. and Hauschild, M. (2019), “The role of life cycle engineering (LCE) in meeting the sustainable development goals – report from a consultation of LCE experts”, Journal of Cleaner Production, Vol. 230, pp. 378–382.CrossRefGoogle Scholar
McAloone, T.C. and Pigosso, D.C.A. (2021), “Ökodesign”, in Bender, B. and Gericke, K. (Eds.), Pahl/Beitz Konstruktionslehre: Methoden und Anwendung erfolgreicher Produktentwicklung, 9. Auflage, Springer, Berlin, Heidelberg, pp. 975–1021.Google Scholar
Moreno, M., los Rios, C. de, Rowe, Z. and Charnley, F. (2016), “A Conceptual Framework for Circular Design”, Sustainability, Vol. 8 No. 9, p. 937.CrossRefGoogle Scholar
OMG (2019), OMG Meta Object Facility (MOF) Core Specification, Version 2.5.1, available at: https://www.omg.org/spec/MOF/2.5.1 (accessed 18 September 2023).Google Scholar
Potting, J., Hekkert, M., Worrell, E. and Hanemaaijer, A. (2017), Circular Economy: Measuring innovation in the product chain, The Hague, available at: https://www.pbl.nl/en/publications/circular-economy-measuring-innovation-in-product-chains (accessed 7 November 2022).Google Scholar
Purvis, B., Mao, Y. and Robinson, D. (2019), “Three pillars of sustainability: in search of conceptual origins”, Sustainability Science, Vol. 14 No. 3, pp. 681–695.CrossRefGoogle Scholar
Roques, P. (2018), Systems Architecture Modeling with the Arcadia Method: A Practical Guide to CAPELLA, Elsevier Science, Saint Louis.Google Scholar
Sassanelli, C., Urbinati, A., Rosa, P., Chiaroni, D. and Terzi, S. (2020), “Addressing circular economy through design for X approaches: A systematic literature review”, Computers in Industry, Vol. 120, p. 103245.CrossRefGoogle Scholar
Sumter, D., Koning, J. de, Bakker, C. and Balkenende, R. (2020), “Circular Economy Competencies for Design”, Sustainability, Vol. 12 No. 4, p. 1561.CrossRefGoogle Scholar
Wanyama, W., Ertas, A., Zhang, H.-C. and Ekwaro-Osire, S. (2003), “Life-cycle engineering: Issues, tools and research”, International Journal of Computer Integrated Manufacturing, Vol. 16 No. 4-5, pp. 307–316.CrossRefGoogle Scholar
Watson, R. (2014), “Entmaterialisierung”, in Watson, R. and Schneider, R. (Eds.), 50 Schlüsselideen der Zukunft, Spektrum Sachbuch, Springer Spektrum, Berlin, Heidelberg, pp. 108–111.CrossRefGoogle Scholar
Weck, O.L. de (2011), Engineering systems: Meeting human needs in a complex technological world, Engineering systems, MIT Press, Cambridge, Mass.Google Scholar
Weilkiens, T. (2014), Systems engineering mit SysML/UML: Anforderungen, Analyse, Architektur, 3., überarbeitete und aktualisierte Auflage, dpunkt.verlag, Heidelberg.Google Scholar
Werner, M., Potinecke, T., Block, L. and Edel, F. (2023), “Nachhaltigkeitsorientierung im Life Cycle Engineering. Umsetzung kreislauforientierter Produkte und Dienstleistungen mithilfe der modellbasierten Systementwicklung”, in Fesidis, B., Röß, S.A. and Rummel, S. (Eds.), Mit Digitalisierung und Nachhaltigkeit zum klimaneutralen Unternehmen: Strategische Frameworks und Best-Practice-Beispiele, FOM-Edition, 1. Auflage, Springer Fachmedien, Wiesbaden, tbd.CrossRefGoogle Scholar
Yvars, P.-A. and Zimmer, L. (2021), “A Model-based Synthesis approach to system design correct by construction under environmental impact requirements”, Procedia CIRP, Vol. 103, pp. 85–90.CrossRefGoogle Scholar
You have
Access
Open access