Hostname: page-component-848d4c4894-5nwft Total loading time: 0 Render date: 2024-06-01T05:37:22.459Z Has data issue: false hasContentIssue false
  • English
  • Français

A review of hydraulic energy harvester designs – current practice and future improvements

Published online by Cambridge University Press:  16 May 2024

Lorenzo Giunta ,
James Roscow  and
Jingqi Liu
Lorenzo Giunta*
Affiliation:
University of Bath, United Kingdom
James Roscow
Affiliation:
University of Bath, United Kingdom
Jingqi Liu
Affiliation:
University of Bath, United Kingdom
*
*lg413@bath.ac.uk

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

This paper addresses the underexplored domain of hydraulic energy harvesters (HEH). Through a literature review, existing designs are identified, aiding in the categorisation of energy conversion technologies and fluid-mechanical interfaces. Recognizing a lack of standardized approaches to testing HEH, the paper proposes a re-configurable test platform. The platform, accommodating diverse configurations, operates at high pressures, aligns with existing hydraulic setups, and functions in static or dynamic modes. This tool aims to assist researchers further explore the implementation of HEHs.

Keywords

energy efficiencyenergy harvesterprototypingdesign review
Type
Engineering Design Practice
Information
Proceedings of the Design Society , Volume 4: DESIGN 2024 , May 2024 , pp. 2993 - 3002
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2024.

References

Alvarado, U., Juanicorena, A., Adin, I., Sedano, B., Gutiérrez, I. and de Nó, J. (2012), “Energy harvesting technologies for low-power electronics”, Transactions on Emerging Telecommunications Technologies, Vol. 23 No. 8, pp. 728–741, https://dx.doi.org/10.1002/ett.2529.CrossRefGoogle Scholar
Aranda, J.J., Bader, S. and Oelmann, B. (2021), “Self-Powered Wireless Sensor Using a Pressure Fluctuation Energy Harvester”, Sensors, Vol. 21 No. 4, p. 1546, https://dx.doi.org/10.3390/s21041546.CrossRefGoogle ScholarPubMed
Aranda, J.J.L., Bader, S. and Oelmann, B. (2018), “An Apparatus for the Performance Estimation of Pressure Fluctuation Energy Harvesters”, IEEE Transactions on Instrumentation and Measurement, IEEE, Vol. 67 No. 11, pp. 2705–2713, https://dx.doi.org/10.1109/TIM.2018.2828701.Google Scholar
Bakytbekov, A., Nguyen, T.Q., Li, W., Lee Cottrill, A., Zhang, G., Strano, M.S., Salama, K.N., et al. . (2020), “Multi-source ambient energy harvester based on RF and thermal energy: Design, testing, and IoT application”, Energy Science & Engineering, Vol. 8 No. 11, pp. 3883–3897, https://dx.doi.org/10.1002/ese3.784.CrossRefGoogle Scholar
Cao, D.-X., Duan, X.-J., Guo, X.-Y. and Lai, S.-K. (2020), “Design and performance enhancement of a force-amplified piezoelectric stack energy harvester under pressure fluctuations in hydraulic pipeline systems”, Sensors and Actuators A: Physical, Elsevier B.V., Vol. 309, p. 112031, https://dx.doi.org/10.1016/j.sna.2020.112031.Google Scholar
Chittibabu, S.K., Chintagumpala, K. and Chandrasekhar, A. (2022), “Porous dielectric materials based wearable capacitance pressure sensors for vital signs monitoring: A review”, Materials Science in Semiconductor Processing, Elsevier Ltd, Vol. 151 No. August, p. 106976, https://dx.doi.org/10.1016/j.mssp.2022.106976.CrossRefGoogle Scholar
Citroni, R., Di Paolo, F. and Livreri, P. (2019), “Evaluation of an optical energy harvester for SHM application”, AEU - International Journal of Electronics and Communications, Elsevier GmbH, Vol. 111, p. 152918, https://dx.doi.org/10.1016/j.aeue.2019.152918.Google Scholar
Fan, F.-R., Tian, Z.-Q. and Lin Wang, Z. (2012), “Flexible triboelectric generator”, Nano Energy, Elsevier, Vol. 1 No. 2, pp. 328–334, https://dx.doi.org/10.1016/j.nanoen.2012.01.004.CrossRefGoogle Scholar
Ko, Y., Miao Yu, S. and Bilton, A.M. (2019), “Modelling and experimental validation of a controllable energy harvester for pressure regulation”, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), Vol. 6, pp. 1–11, https://dx.doi.org/10.1115/IMECE2019-11514.Google Scholar
Kottapalli, A.G.P., Tao, K., Sengupta, D. and Triantafyllou, M.S. (2019), Self-Powered and Soft Polymer MEMS/NEMS Devices, 1st ed., Springer Cham, https://dx.doi.org/10.1007/978-3-030-05554-7.CrossRefGoogle Scholar
Aranda, Lechuga, Bader, J.J., , S. and Oelmann, B. (2019), “A space-coiling resonator for improved energy harvesting in fluid power systems”, Sensors and Actuators A: Physical, Elsevier B.V., Vol. 291, pp. 58–67, https://dx.doi.org/10.1016/j.sna.2019.01.022.CrossRefGoogle Scholar
Nechibvute, A., Chawanda, A. and Luhanga, P. (2012), “Piezoelectric Energy Harvesting Devices: An Alternative Energy Source for Wireless Sensors”, Smart Materials Research, Vol. 2012, pp. 1–13, https://dx.doi.org/10.1155/2012/853481.CrossRefGoogle Scholar
Negri, E., Fumagalli, L. and Macchi, M. (2017), “A Review of the Roles of Digital Twin in CPS-based Production Systems”, Procedia Manufacturing, The Author(s), Vol. 11 No. June, pp. 939–948, https://dx.doi.org/10.1016/j.promfg.2017.07.198.CrossRefGoogle Scholar
Ren, H. and Wang, T. (2018), “Development and modeling of an electromagnetic energy harvester from pressure fluctuations”, Mechatronics, Elsevier, Vol. 49 No. October 2017, pp. 36–45, https://dx.doi.org/10.1016/j.mechatronics.2017.11.008.Google Scholar
Shi, W., Chen, C., Yang, C., Xian, T., Luo, X. and Zhao, H. (2023), “Experimental and simulation study of a hydraulic piezoelectric energy harvester under different connection modes”, Energy, Elsevier Ltd, Vol. 281 No. June, p. 128287, https://dx.doi.org/10.1016/j.energy.2023.128287.CrossRefGoogle Scholar
Shi, W., Yang, C., Zhao, H., Chen, C., Gao, Y. and Luo, X. (2023), “Design, simulation and experiment for a piezoelectric energy harvester based on fluid pressure pulsation in water hydraulic system”, Ocean Engineering, Elsevier Ltd, Vol. 288 No. P2, p. 116097, https://dx.doi.org/10.1016/j.oceaneng.2023.116097.CrossRefGoogle Scholar
Skow, E.A., Cunefare, K.A. and Erturk, A. (2014), “Power performance improvements for high pressure ripple energy harvesting”, Smart Materials and Structures, IOP Publishing, Vol. 23 No. 10, p. 104011, https://dx.doi.org/10.1088/0964-1726/23/10/104011.Google Scholar
Sob, P.B. and Pita, M. (2020), “Simulation and theoretical Analyses of the Impact of Velocity, Pressure and Kinetic Energy during Damping in a Shock absorber”, Proceedings of 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies, ICMIMT 2020, IEEE, pp. 98–102, https://dx.doi.org/10.1109/ICMIMT49010.2020.9041170.Google Scholar
Wang, S.-W.W., Ke, Y.-W.W., Huang, P.-C.C. and Hsieh, P.-H.H. (2018), “Electromagnetic Energy Harvester Interface Design for Wearable Applications”, edited by Bizon, N., Mahdavi Tabatabaei, N., Blaabjerg, F. and Kurt, E. IEEE Transactions on Circuits and Systems II: Express Briefs, Springer International Publishing, Cham, Vol. 65 No. 5, pp. 667–671, https://dx.doi.org/10.1109/TCSII.2018.2820158.CrossRefGoogle Scholar
Xiao, H., Pan, M., Chu, J.Y.H., Bowen, C.R., Bader, S., Aranda, J. and Zhu, M. (2022), “Hydraulic Pressure Ripple Energy Harvesting: Structures, Materials, and Applications”, Advanced Energy Materials, Vol. 12 No. 9, pp. 1–23, https://dx.doi.org/10.1002/aenm.202103185.Google Scholar
Xiao, H., Qie, H. and Bowen, C.R. (2021), “Modelling of the circular edge-clamped interface of a hydraulic pressure energy harvester to determine power, efficiency and bandwidth”, Mechanical Systems and Signal Processing, Elsevier Ltd, Vol. 146, p. 107013, https://dx.doi.org/10.1016/j.ymssp.2020.107013.CrossRefGoogle Scholar
Yang, C., Shi, W., Chen, C., Gao, Y. and Wang, H. (2022), “Design and Experimental Investigation of a Novel Piezoelectric Energy Harvester in Pneumatic System”, Energy Technology, Vol. 10 No. 6, pp. 1–9, https://dx.doi.org/10.1002/ente.202200096.CrossRefGoogle Scholar
Zhou, K., Liu, Taigang and Zhou, Lifeng. (2015), “Industry 4.0: Towards future industrial opportunities and challenges”, 2015 12th International Conference on Fuzzy Systems and Knowledge Discovery (FSKD), IEEE, pp. 2147–2152, https://dx.doi.org/10.1109/FSKD.2015.7382284.CrossRefGoogle Scholar