Volume 55 - Issue 5 - October 2007
Research Article
Polytype and morphological analyses of gümbelite, a fibrous Mg-rich illite
- Jun Kameda, Ritsuro Miyawaki, Victor A. Drits, Toshihiro Kogure
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 453-466
-
- Article
- Export citation
-
Polytypism in gümbelite and its relationship to the fibrous or ribbon-like morphology exhibited by this Mg-rich illite were investigated by powder X-ray diffraction (XRD), electron back-scattered diffraction (EBSD) and transmission electron microscopy (TEM). Comparison between the XRD pattern from oriented fibers using a conventional powder diffractometer and a randomly oriented pattern using a Gandolfi camera suggested that 2M2 is dominant but other polytypes belonging to subfamily A also exist, and that the fiber axis of gümbelite is parallel to <110> in 2M2, <110> in 2M1, and <100> in 1M. The EBSD analyses confirmed these crystallographic directions directly from individual crystals. Electron diffraction and high-resolution TEM showed that twinning and intergrowths of various polytypes including both subfamilies are common in a single crystal and that the two types of rotations [2n60° and (2n+1)60°] between adjacent layers are often randomly mixed at the monolayer level. The data suggest that high densities of twinning and intergrowths account for the origin of the fibrous morphology along <110> for 2M1 and 2M2 polytypes. Volume restriction in a confined vein space may also play a role.
X-ray diffraction criteria for the identification of trans- and cis-vacant varieties of dioctahedral micas
- Bella B. Zviagina, Boris A. Sakharov, Victor A. Drits
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 467-480
-
- Article
- Export citation
-
To provide structural and diffraction criteria for the identification of trans-vacant (tv) and cis-vacant (cv) mica varieties with different layer stackings, powder X-ray diffraction (XRD) patterns have been simulated for 1M, 2M1, 2M2, 3T and 2O structural models consisting of either tv or cv layers. The differences in the unit-cell parameters resulting from the specific structural distortions of tv and cv layers lead to the differences in the positions of reflections having the same indices in the XRD patterns for tv and cv 1M, 2M1 and 2M2 mica varieties. The tv 1M, 2M1 and 2M2 varieties of Al-rich micas can therefore be distinguished from the corresponding cv varieties using powder XRD diffraction provided that the d values are measured with high precision and accurately compared with those calculated from the unit-cell parameters for the corresponding hkl indices. The differences in reflection positions for these tv and cv varieties should decrease with increasing Mg and/or Fe contents, thus complicating their identification.
The peak positions and intensity distributions in the XRD pattern for the tv 3T variety are similar to those for the cv 3T structure with the vacancy in the right-hand cis site (3T-cv1), and both XRD patterns are similar to that for the 1M-cv mica. The simulated XRD pattern for the cv 3T structure with the vacancy in the left-hand cis site (3T-cv2) is similar to that for the 1M-tv variety. The similarities and dissimilarities in intensity distribution between the XRD patterns simulated for the 1M and 3T varieties in question may be associated with the differences in the mutual arrangement of cations and anions in successive layers.
Possible interstratification of tv and cv layers within the same structure should seriously complicate the identification of dioctahedral mica polytypes and polymorphs.
Extensive dickitization of the permo-triassic fluvial sandstones from the eastern Iberian Range, Spain
- J. D. Martín-Martín, D. Gómez-Gras, T. Sanfeliu, M. Thiry, M. D. Ruiz-Cruz, F. Franco
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 481-490
-
- Article
- Export citation
-
Diagenetic kaolin minerals are very common in the Permo-Triassic succession from the SE Iberian Range, Spain. The morphology and crystal structure of kaolin minerals has been examined in four size fractions (<1 µm, <2 µm, <6.3 µm and <20 µm) of sandstone samples by means of scanning electron microscopy, X-ray diffraction, infrared spectroscopy, differential thermal analysis and thermogravimetry. Experimental data reveal that dickite is the dominant kaolin-type mineral in the entire range of size fractions, whereas small amounts of kaolinite coexists with dickite in all size fractions. Dickite appears typically as booklets of pseudo-hexagonal plates with blocky habit. The increase in size fraction is concomitant with the increase in the amount of dickite and the progressive improvement of its structural order. The extensive dickitization is attributed to the high paleogeothermal gradient recorded in the studied area and the increase in H+, presumably resulting from the flux of organic acids derived from the underlying Carboniferous rocks and/or the late Permian succession. These conditions are more likely to be associated with the late Cretaceous post-rift thermal stage of the eastern Iberian Basin. Lately, during the maximum burial depth, the fine crystalline kaolin minerals were slightly illitized. Given the very small feldspar content in the studied sequence, the results reflect the important contribution of mica alteration to the early diagenetic formation of kaolinite as well as the late conversion to dickite.
Oligocene clay mineralogy of the linxia basin: evidence of paleoclimatic evolution subsequent to the initial-stage uplift of the Tibetan Plateau
- Hanlie Hong, Zhaohui Li, Huijuan Xue, Yunhai Zhu, Kexin Zhang, Shuyuan Xiang
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 491-503
-
- Article
- Export citation
-
The clay mineral content of the Oligocene sediments in the Linxia Basin has been investigated using X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. The clay mineral assemblages are mainly mixed-layer illite-smectite (I-S), illite, kaolinite and minor palygorskite in the early-Middle Oligocene deposits, mixed-layer I-S, illite and kaolinite in the Middle Oligocene deposits, mainly illite and chlorite (usually >50–70 vol.%), mixed-layer I-S, and trace to minor palygorskite in the late Oligocene sediments, respectively. The mineral assemblage indicates a warm and seasonally humid climate in the Middle Oligocene, with an episode of warm and dry conditions in the early stage of the Middle Oligocene, and a trend of temperature decrease and more arid conditions in the late Oligocene. Climate evolution in the Oligocene corresponds with the significant elevation change in central Tibet since late Oligocene, and therefore, suggests that tectonic-forced cooling of climate took place in Linxia in the northeast margin of the Tibetan Plateau. The ubiquitous mixed-layer I-S and carbonates throughout the Oligocene sediments reflect relatively small fluctuations in climate conditions during the epoch. The changes in clay mineral components and feldspars in the late Oligocene suggest a variation in the source of clastic materials, which probably reflects an increase in erosion of soils and poorly weathered parent rock in more elevated or high-relief source areas during this period of tectonic uplift.
Clay mineral assemblages and vitrinite reflectance in the Laga Basin (Central Apennines, Italy): What do they record?
- Luca Aldega, Flavia Botti, Sveva Corrado
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 504-518
-
- Article
- Export citation
-
Temperature-dependent clay mineral assemblages and vitrinite reflectance data have been used to investigate levels of diagenesis from the Messinian Laga Basin in the Central Apennines developed at the footwall of the Sibillini Mts. and the Gran Sasso Massif. Data are from stratigraphic units forming the main siliciclastic basin fill up to Middle Messinian gypsum-arenites and its pre-orogenic substratum. Specifically, the largest Rom% values and percentages of illite layers in illite-smectie (I-S) are found in the basin depocenter and at the footwall of the main carbonate thrust sheets. Smaller Rom% values, and percentage of illite layers in I-S characterize less subsided sectors surrounding the depocenter.
The X-ray diffraction data were treated using decomposition methods and the peaks identified were rationalized in terms of discrete and/or mixed-layer phases. Complex clay mineral assemblages were found in the Laga Fm. including three sub-populations of illitic material corresponding to authigenic and detrital components. I-S mixed layers record the maximum paleotemperature the Laga Fm. experienced, which is directly related to its burial history. Kübler index (KI) data, however, suggest higher temperatures related to detrital K-micas inherited from the uplift of the Alpine-Apennines chain.
A tentative calculation of paleotemperatures from selected data of organic and inorganic parameters is also proposed and compared with recent sedimentological, stratigraphic and structural data. We conclude that the Laga Basin fill never experienced temperatures of >100–110°C, generally due to variable sedimentary loading, whereas localized anomalous heating is due to the effect of the tectonic emplacement and subsequent local erosion of the Sibillini and Gran Sasso thrust sheets.
Correlation between surface area and Atterberg Limits of fine-grained soils
- Bojana Dolinar, Miha Mišič, Ludvik Trauner
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 519-523
-
- Article
- Export citation
-
As the water content is increased, the consistency of a fine-grained soil changes from a semi-solid state to a plastic state and finally to a liquid state. The plastic limit (PL) is the point at which the consistency, caused by the soil water content, is transformed from a semi-solid state to a plastic state. The liquid limit (LL) is the point at which the consistency is transformed from a plastic state to a liquid state. The plastic limit and liquid limit are often collectively referred to as the Atterberg (or consistency) Limits. Although the liquid and plastic limits are easily determined, fundamental interpretations of the limits and quantitative relationships between their values and compositional factors are more complex. Previous studies examined artificially-prepared soil samples that contained monomineralic clays and a non-clay substance(quartz sand). These studies have shown that in soils without expandable clays the PL and LL water contents were mostly related to surface area and clay content. For soils that contain expandable clays, the PL and LL values are also dependent on interlayer water content. Hence, expandable clay mineral contents are needed to calculate PL and LL values. These relationships have been presented in a general analytical form. The aim of these investigations was to identify practical applications. Mineral compositions and surface areas of five randomly selected natural soil samples were used to estimate PL and LL values. The estimated values were compared to experimentally measured liquid limits (by the ‘fall-cone’ test) and plastic limit (by the ‘rolling thread’ test) values. The measured PL values ranged from 18.77 to 44.92% and the LL values from 31.19 to 82.10%. The differences between estimated and measured Atterberg Limits were 3.0–7.1% for thePL and 2.7–7.8% for the LL. Minor differences in measured and estimated Atterberg Limits were probably due to soil organic matter (1.2–2.7%).
Zeolitization of tuffs at Quinamávida, central southern Chile
- Sophía Bascuñan, Ursula Kelm, Vilma Sanhueza, Guillermo Alfaro
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 524-533
-
- Article
- Export citation
-
Tuffs of the Tertiary Colbún Formation near Quinamávidain central southern Chile have been mapped and their mineralogy analyzed. The pyroclastic rocks present a maximum outcropping thickness of 120 m and are dominated by vitreous lapilli and minor lithic tuffs, the products of active volcanism nearby. About 10% of the tuffs consist of lenses of fine banded tuffs with a high leaf content that were deposited in shallow lakes during quiescent periods between periods of volcanic activity. This tuff sequence is pervasively transformed to clinoptilolite/heulandite and mordenite with variable amounts of plagioclase, minor quartz and smectite. Factors thought to have influenced this conversion to zeolites are a humid climate following deposition combined with a slightly elevated heat flow. Local hydrogeological conditions have modified the cation-hydrogen ion ratios across the study area favoring the formation of clinoptilolite/heulandite and mordenite with medium-minor smectite in the center and south, and a more abundant presence of smectite in the north of the study area.
Baseline studies of the clay minerals society special clays: Specific surface area by the Brunauer Emmett Teller (BET) method
- Meral Dogan, A. Umran Dogan, F. Irem Yesilyurt, Dogan Alaygut, Ira Buckner, Dale Eric Wurster
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 534-541
-
- Article
- Export citation
-
The Clay Minerals Society published a complete characterization scheme for its ‘Source Clays’ but not for its ‘Special Clays’. To address this issue, the specific surface areas (SSAs) of the 16 special clays from The Clay Minerals Society were determined using the Brunauer, Emmett and Teller (BET) method of adsorption of an inert gas. Two BET measurements were performed for each of the 16 special clays, and the average BET SSA of each of the special clays was determined. The BET SSA of cookeite is reported for the first time. In the present study, special clays from The Clay Minerals Society are classified under three groups based on their BET special surface area values as Group-I special clays, with BET values of 0.1–10 m2/g, Group-II special clays, with BET values of 10–100 m2/g, and Group-III special clays, with BET values >100 m2/g. Comparisons which proved interesting were the those involving the mixed-layer clays and the synthetic clays. The systematic approach employed in this paper will allow for better comparisons to be made between different clays and will provide a comprehensive database for future applications of such material (e.g. as catalyst carriers, as adsorbents in waste treatments, etc.).