Hostname: page-component-848d4c4894-5nwft Total loading time: 0 Render date: 2024-06-13T08:50:43.081Z Has data issue: false hasContentIssue false
  • English
  • Français

Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-deposition modeling three-dimensional printing – CORRIGENDUM

Published online by Cambridge University Press:  27 December 2017

Hoejin Kim ,
Fernando Torres ,
Tariqul Islam ,
Didarul Islam ,
Luis A. Chavez ,
Carlos A. Garcia Rosales ,
Bethany R. Wilburn ,
Calvin M. Stewart ,
Juan C. Noveron  and
Tzu-Liang B. Tseng
...Show all authors

Abstract

An abstract is not available for this content. As you have access to this content, full HTML content is provided on this page. A PDF of this content is also available in through the ‘Save PDF’ action button.
Type
Corrigendum
Information
MRS Communications , Volume 7 , Issue 4 , December 2017 , pp. 974
Copyright
Copyright © Materials Research Society 2017 

In Kim et al.,Reference Kim, Torres, Islam, Islam, Chavez, Garcia Rosales, Wilburn, Stewart, Noveron, Tseng and Lin 1 a calculation error was made in the piezoelectric coefficient d 31 for 3D printed MWCNT/BT/PVDF nanocomposites. Output millivolts were used instead of volts in the equation to get the final d 31, so all values of d 31 should be divided by 1000 to get the correct values. A detailed list of corrections follows:

Abstract, line 5: the value 129 pC/N should be 0.13 pC/N. The sentence beginning “Measured d 31 of 3D printed…” should be deleted.

Page 5, right column, paragraph 2, line 7: the values 0.22 to 57.6 pC/N should be 0.002 to 0.058 pC/N.

Page 5, right column, paragraph 2, line 13: the values 21.8 (0 wt%-BT) to 129 pC/N (18 wt%-BT) should be 0.022 (0 wt%-BT) to 0.13 pC/N (18 wt%-BT).

Page 5, right column, paragraph 2, line 14: the sentence beginning “The measured d 31 of the nanocomposites is comparable…” should be deleted.

Page 7, left column, paragraph 1, line 6: the value of 129 pC/N should be 0.13 pC/N.

Figure 3 is corrected below.

The authors regret these errors.

References

1. Kim, H., Torres, F., Islam, M.T., Islam, M.D., Chavez, L.A., Garcia Rosales, C.A., Wilburn, B. R., Stewart, C.M., Noveron, J.C., Tseng, T.-L.B., and Lin, Y.: Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-deposition modeling three-dimensional printing. MRS Communications (2017). https://doi.org/10.1557/mrc.2017.126 Google Scholar