Field experiments were conducted in 2001 and 2002 to evaluate the efficacy of herbicides on protoporphyrinogen oxidase (protox, EC 1.3.3.4) inhibitor–resistant common waterhemp in corn and soybean. All corn herbicides tested gave greater than 90% common waterhemp control by 8 wk after postemergence herbicide treatment (WAPT). In soybean, common waterhemp control was less than 40% by 8 WAPT with postemergence protox-inhibiting herbicides lactofen and acifluorfen. However, preemergence protox-inhibiting herbicides sulfentrazone and flumioxazin gave greater than 85% common waterhemp control in both years. The greatest common waterhemp control in soybean was with glyphosate alone, alachlor + metribuzin, alachlor followed by (fb) glyphosate, and S-metolachlor + metribuzin fb glyphosate.

Field trials were conducted to compare the effect of various soil fumigants along with in-bed pebulate and row-middle metribuzin applications on purple nutsedge control and on tomato and bell pepper growth and yield. Treatments consisted of combinations of soil fumigants, pebulate, and metribuzin. Fumigants levels were (1) untreated control, (2) methyl bromide (MBr) + chloropicrin (Pic) (67 + 33%, respectively), (3) Pic, (4) metham, (5) dazomet, and (6) 1,3-dichloropropene (1,3-D) + Pic (83 + 17%, respectively). Pebulate levels were either applied in-bed or not applied. Row middles were either sprayed with metribuzin or untreated. In both crops, purple nutsedge populations were independently influenced by fumigants and pebulate applications, with the highest number of purple nutsedge plants in the untreated control. The addition of pebulate reduced purple nutsedge populations in all treatments. In tomato trials, the yield was affected by fumigants, with the highest losses (53 and 50% reductions in fruit number and weight) observed in the nonfumigated control. In pepper trials, fruit number and weight were individually influenced by fumigants and metribuzin sprayings. Application of metribuzin to row middles increased yields 10% relative to nontreated plots.

Field studies were conducted from 1998 to 2000 in Tennessee, North Carolina, Arkansas, and Oklahoma to determine the effects of sulfentrazone carryover to a cotton rotational crop from sulfentrazone applied the previous year. Sulfentrazone applied the previous year at 400 g/ha caused no yield loss in Tennessee, >30% yield reduction in Oklahoma, and 20% yield loss in Arkansas and North Carolina. In most experiments in this study, visual evaluations of injury closely correlated with final cotton lint yield (r2 =0.84).

Effects of cogongrass foliage and rhizome plus root residues on germination and shoot and root growth of barnyardgrass, bermudagrass, browntop millet, hemp sesbania, Italian ryegrass, and prickly sida were investigated in greenhouse experiments. Ground residues of dried cogongrass foliage and rhizomes plus roots were mixed separately with sterilized sand to obtain residue concentrations of 0, 0.25, 0.5, 1, 2, 4, and 8%. These residue concentrations were investigated on bermudagrass and Italian ryegrass, and the 8% residue concentrations were also evaluated on hemp sesbania, prickly sida, barnyardgrass, and browntop millet. Foliage and rhizome plus root residues at concentrations as low as 0.25% inhibited seed germination and shoot and root growth of all species except hemp sesbania. Germination of bermudagrass and Italian ryegrass was reduced by as much as 97% and shoot and root growth by as much as 94% at the highest residue concentrations. Rhizome plus root residues reduced germination and shoot and root growth of bermudagrass and Italian ryegrass more than foliage residues. Foliage and rhizome plus root residues reduced germination and shoot and root biomass of prickly sida, barnyardgrass, and browntop millet at similar levels. Results indicate that cogongrass tissue may contain allelochemicals that contribute to its invasiveness and extreme competitiveness.

Glyphosate and paraquat herbicide drift injury to crops may substantially reduce growth or yield. Determining the type and degree of injury is of importance to a producer. This research was conducted to determine whether remote sensing could be used to identify and quantify herbicide injury to crops. Soybean and corn plants were grown in 3.8-L pots to the five- to seven-leaf stage, at which time, applications of nonselective herbicides were made. Visual injury estimates were made, and hyperspectral reflectance data were recorded 1, 4, and 7 d after application (DAA). Several analysis techniques including multiple indices, signature amplitude (SA) with spectral bands as features, and wavelet analysis were used to distinguish between herbicide-treated and nontreated plants. Classification accuracy using SA analysis of paraquat injury on soybean was better than 75% for both 1/2- and 1/8× rates at 1, 4, and 7 DAA. Classification accuracy of paraquat injury on corn was better than 72% for the 1/2× rate at 1, 4, and 7 DAA. These data suggest that hyperspectral reflectance may be used to distinguish between healthy plants and injured plants to which herbicides have been applied; however, the classification accuracies remained at 75% or higher only when the higher rates of herbicide were applied. Applications of a 1/2× rate of glyphosate produced 55 to 81% soybean injury and 20 to 50% corn injury 4 and 7 DAA, respectively. However, using SA analysis, the moderately injured plants were indistinguishable from the uninjured controls, as represented by the low classification accuracies at the 1/8-, 1/32-, and 1/64× rates. The most promising technique for identifying drift injury was wavelet analysis, which successfully distinguished between corn plants treated with either the 1/8- or the 1/2× rates of paraquat compared with the nontreated corn plants better than 92% 1, 4, and 7 DAA. These analysis techniques, once tested and validated on field scale data, may help determine the extent and the degree of herbicide drift for making appropriate and, more importantly, timely management decisions.

Split application of herbicides for wild oat control may minimize wild oat competition with wheat while reducing the number of wild oat seeds returned to the soil. Field experiments were conducted in 2000 and 2001 to evaluate the effects of CGA-184927, fenoxaprop-P, flucarbazone, and ICIA 0604 at labeled and reduced rates on wild oat control, wild oat seed rain, and wheat yield. Each herbicide was applied once at 25, 33, and 100% of the labeled rate at the two-leaf stage of wild oat or split applied at 50 and 66% of the full rate as two equal applications. Excellent full-season wild oat control was obtained with CGA-184927, flucarbazone, and ICIA 0604 applied twice at reduced rates. ICIA 0604 or CGA-184927 split applied at 25 and 33% rates (totaled 50 and 66% of the full rate) provided wild oat control equal to one application of labeled rates. Wild oat seed rain was similar among all herbicide treatments, except plots treated with fenoxaprop-P once at 25 and 33% rates where seed rain was higher and equal to 47% of untreated plots. Wheat yields and net returns were highest and similar after treatment with CGA-184927 or ICIA 0604 applied either once at the labeled rate or split applied at 25 or 33% rates.

Field trials were conducted in 2000 and 2001 in New Jersey to evaluate quinclorac and siduron for large crabgrass control in summer-seeded creeping bentgrass (‘L-93’). Bentgrass was surface seeded on June 30 and June 26 in 2000 and 2001, respectively. Treatments consisted of preemergence (PRE) applications of siduron at 3.4, 5.0, and 6.7 kg ai/ha and PRE and postemergence (POST) applications of quinclorac at 0.4, 0.6, 0.8, and 1.7 kg ai/ha. POST applications were timed to a crabgrass growth stage of three leaves to one tiller. All POST quinclorac applications included methylated seed oil at 1% (v/v). Percent crabgrass cover in untreated plots at 30 d after planting (DAP) averaged 10 and 50% in 2000 and 2001, respectively. All PRE treatments, with the exception of quinclorac applied at 0.4 kg/ha in 2001, reduced crabgrass cover by 80% or more at 30 DAP. Crabgrass control decreased in late August when siduron and quinclorac were applied at the lower rates in 2001. PRE quinclorac applications at the rate of 0.6 kg/ha or higher in 2000 or 1.7 kg/ha in 2001 caused significant thinning of the bentgrass stand at 30 DAP. All POST quinclorac treatments provided excellent crabgrass control in 2000, but the 0.8-kg/ha or higher rate was required to reduce crabgrass infestation levels by at least 80% in 2001. All POST quinclorac applications caused significant chlorosis to the creeping bentgrass in both years. However, significant thinning of the bentgrass stand was not evident, with the exception of 1.7 kg/ha, in 2001. These studies suggest that PRE applications of siduron should be used for the highest level of creeping bentgrass safety in summer restoration projects. The use of quinclorac should be limited to POST applications to control escaped crabgrass once the newly emerging creeping bentgrass has become well established.

Biennial wormwood has become an important weed for soybean producers in the northern Great Plains states of the United States. Research was conducted at Fargo, Leonard, and Wyndmere, ND, in 2000 and 2001 to evaluate postemergence control of biennial wormwood in soybean. Biennial wormwood densities at Fargo, Leonard, and Wyndmere were 290, 290, and 130 plants/m2 in 2000 and 22, 670, and 88 plants/m2 in 2001, respectively. Across years, biennial wormwood control with postemergence herbicides 4 wk after treatment was 81 to 97% at Fargo, 5 to 89% at Leonard, and 2 to 95% at Wyndmere. Biennial wormwood control was greater at Fargo than at the other locations probably because of smaller seedling size at the time of treatment. Bentazon split applied at the rate of 560 g ai/ha followed by 560 g/ha approximately 12 d after the first treatment generally provided the least amount of injury to soybean, the greatest control of biennial wormwood, and the fewest escaped plants. Lactofen at 220 g ai/ha or split applied at 110 g/ha followed by 110 g/ha approximately 12 d after the first treatment provided 84% or greater biennial wormwood control at Fargo but less than 40% control at Leonard and Wyndmere. The 4.5:1 bentazon plus acifluorfen premix full-rate and split treatments provided slightly better control than the 2:1 bentazon plus acifluorfen premix full-rate and split treatments. High levels of biennial wormwood control can be achieved with a better understanding of seedling emergence patterns and by targeting postemergence herbicide applications to seedlings less than 5 cm tall.

Field experiments were conducted near Scottsbluff, NE, in 2001 and 2002 to compare economic aspects of glyphosate applied to different glyphosate-resistant sugar beet cultivars with that of conventional herbicide programs applied to near-equivalent, non–glyphosate-resistant conventional cultivars. Glyphosate applied two or three times at 2-wk intervals, beginning when weeds were 10 cm tall, provided excellent weed control, yield, and net economic return regardless of the glyphosate-resistant sugar beet cultivar. All conventional herbicide treatments resulted in similar net economic returns. Although the conventional sugar beet cultivars ‘HM 1640’ and ‘Beta 4546’ responded similarly to herbicide treatments with respect to sucrose content, ‘Beta 4546RR’ produced roots with 1% more sucrose than ‘HM 1640RR’. When averaged over herbicide treatments, a producer planting Beta 4546RR could afford to pay US $185/ha more for glyphosate-resistant technology as could a producer planting HM 1640RR. When averaged over cultivars and herbicide treatments, it is estimated that a producer could afford to pay an additional US $385/ha for glyphosate-resistant technology without decreasing net return.

The activity of emulsifiable concentrate (EC) formulation of pendimethalin was studied using a petri dish bioassay based on root response of corn, oat, sorghum, and sugar beet grown in soil. Furthermore, the oat bioassay was used to determine the activity of EC, microencapsulated (ME), and water-dispersible granule (WDG) formulations of pendimethalin. Also, field persistence in soil of these pendimethalin formulations was studied with petri dish and pot bioassays, based on root response of oat and sugar beet. All bioassays indicated that activity of all pendimethalin formulations was increased with increasing herbicide concentration. In silty clay loam soil, oat and sugar beet exhibited the highest sensitivity to EC-pendimethalin concentrations and corn the lowest; sorghum showed intermediate herbicide sensitivity. EC of pendimethalin showed the highest activity on oat and ME pendimethalin the lowest; WDG-pendimethalin showed similar activity to that of ME pendimethalin. Field persistence was significantly increased with increasing rate of application, but it was slightly increased by the ME formulation.

Field studies were conducted to assess two sulfur-containing additives for use with glyphosate applied postemergence to glyphosate-resistant cotton for the control of sicklepod and yellow nutsedge. Neither diammonium sulfate (AMS) nor ammonium thiosulfate (ATS), both applied at 2.24 kg/ha, increased control of either species. Effective control of both species was dependent on glyphosate (isopropylamine salt) rate alone, with optimum control at 1.26 kg ae/ha. Plant-mapping data further indicated that sulfur-containing additives generally had no effect on either cotton fruiting patterns or yield. However, applying glyphosate at any rate did increase seed cotton yield in 2 of 3 yr vs. no glyphosate. In addition, applying glyphosate at any rate resulted in an increase in the number of bolls vs. no glyphosate in the following plant-mapping responses: total number of bolls per plant, number of abcised bolls per plant, bolls at the top five sympodial nodes, and bolls at positions 1 and 2 on the sympodia. Glyphosate absorption and subsequent translocation, as influenced by the addition of the sulfur-containing additives, was evaluated using radiotracer techniques. Glyphosate absorption after 48 h was 86, 63, and 37% of amount applied in cotton, sicklepod, and yellow nutsedge, respectively. Absorption by sicklepod and yellow nutsedge was not affected by the addition of either of the additives. Absorption by cotton was reduced by ATS but was not affected by AMS. In yellow nutsedge and cotton, glyphosate concentration in the treated area and adjacent tissue was not affected by either additive. A greater portion of glyphosate was translocated away from the treated area in sicklepod with glyphosate plus AMS (32%) than with glyphosate plus ATS (21%). AMS and ATS may be used in glyphosate-resistant cotton without the risk of either crop injury or yield reduction. However, their use for increased control of annual weed species, such as sicklepod and yellow nutsedge, may not be warranted.

Seed production from weeds that are missed by herbicide application can affect future weed populations and management decisions. It may be possible to expand the utility of computerized weed management decision aids to include an estimate of weed seed production resulting from selected treatments based on crop yield potential. Field studies were conducted in soybean near Columbia, MO, to determine whether weed control recommendations based on crop yield potential from a computerized weed management decision aid influence weed seed production in two soybean row spacings. At approximately 28 d after planting, weed densities and heights were entered into WeedSOFT® to generate a list of treatments ranked by predicted crop yields. Treatments included: (1) highest predicted crop yield in a glyphosate-resistant system, (2) highest predicted crop yield in a nonglyphosate-resistant system, (3) a 10% yield reduction, (4) a 20% yield reduction, and (5) an untreated control. These treatments were applied to soybean grown in 38- and 76-cm rows. Treatments that provided 90% or higher control of an individual species at 22 d after treatment usually produced less seed than untreated checks. Weed seed production based on early-season herbicide efficacy showed a linear relationship and was relatively predictable (r2 ≥ 0.52) for the predominant weed species. For less dominant weed species, weed seed production was not strongly correlated (r2 ≤ 0.27) to early-season herbicide efficacy but apparently influenced by control of other weed species. Narrow row spacing reduced giant foxtail biomass both years but did not reduce common ragweed and ivyleaf morningglory biomass. Narrow rows did not decrease giant foxtail, common ragweed, and ivyleaf morningglory seed production.

Tropical signalgrass is one of the most serious weed problems in the St. Augustinegrass sod production in Florida, and its presence increases production costs and lowers turfgrass quality. The objectives of our research were to: (1) evaluate herbicides preemergence and postemergence for control of tropical signalgrass and (2) compare control of tropical signalgrass and other problem weeds (torpedograss, blanket crabgrass, and India crabgrass) with postemergence herbicides. In preemergence herbicide field trials, only benefin + oryzalin, imazapic, imazapic + 2,4-D, and oryzalin provided ≥75% tropical signalgrass control 8 wk after application (WAA). By 11 WAA, only benefin + oryzalin and imazapic + 2,4-D provided ≥75% tropical signalgrass control. In greenhouse experiments, eight herbicide treatments were applied postemergence to tropical signalgrass seedlings at the two-, four-, six-, and eight-leaf stages. Asulam and CGA 362622 provided ≥89% tropical signalgrass control at all application timings. Imazaquin controlled tropical signalgrass ≥98% when applied before the eight-leaf stage. However, in field trials with mature tropical signalgrass (>20 cm stolons), none of the 20 herbicide treatments applied postemergence provided acceptable control.

Uncontrolled kochia plants that regrow after small-grain harvest can produce substantial numbers of seeds. An average of 4,100 seeds per plant were produced between harvest (late July to mid August) and the first killing frost (late September) at three locations in Montana. Field experiments were conducted to determine the optimal timing of postharvest herbicide applications to prevent kochia from producing viable seeds. Herbicide treatments were applied at three timings from late August to mid September. The most effective treatments were glyphosate (631 g/ha) and paraquat (701 g/ha) applied at the second application timing (late August to early September). These treatments reduced kochia seed production by 92% or greater at each site. Kochia regrowth by this time had sufficient leaf area for herbicide absorption, but few viable seed had been produced. Herbicide treatments at the first and third application timings were generally less effective and more variable in reducing kochia seed production. Sulfentrazone (157 g/ha) and 2,4-D (561 g/ha) were not as effective at reducing seed production as other herbicide treatments.

Tropical spiderwort has recently become the most troublesome weed in Georgia cotton. Most of Georgia's cotton is glyphosate resistant (GR), and glyphosate is only marginally effective on tropical spiderwort. An experiment was conducted at four locations to determine tropical spiderwort control in GR cotton by 27 herbicide systems. Treatments consisted of three early-postemergence over-the-top (POT) herbicide options and nine late–postemergence-directed (LPD) options arranged factorially. Glyphosate POT controlled tropical spiderwort only 53% 21 d after treatment (DAT). Glyphosate plus pyrithiobac or S-metolachlor controlled tropical spiderwort 60 and 80%, respectively. Pyrithiobac improved control of emerged spiderwort, whereas S-metolachlor provided residual control. Pooled over POT treatments, glyphosate LPD controlled tropical spiderwort 70% 21 DAT. Dimethipin mixed with glyphosate did not improve control. Carfentrazone, diuron, or flumioxazin mixed with glyphosate LPD improved control 9 to 15%. MSMA and MSMA plus flumioxazin were 8 and 19% more effective than glyphosate LPD. At time of cotton harvest, systems without residual herbicides at LPD controlled tropical spiderwort 42 to 45% compared with 64 to 76% with LPD treatments that included diuron or flumioxazin.

Brazilian pepper is a small evergreen tree that forms dense colonies. It was introduced for horticultural use in the United States in the early 1800s and was widely distributed in Florida in the late 1920s. Previous remote-sensing projects to detect Brazilian pepper achieved moderate success and warranted additional research using a hyperspectral sensor. Detection with remote sensing is desirable because complete access to ground survey crews is not practical. The western half of the Everglades National Park was imaged at a 5-m spatial resolution with a hyperspectral sensor by Earth Search Sciences Inc. of Kalispell, MT, on December 12, 2000, and January 10, 2001. The sensor has 128 channels and spectral resolution between 450 and 2,500 nm. The purpose of this research was to develop spectral reflectance curves for Brazilian pepper and establish the accuracy of classified images. Classified images showed that a hyperspectral sensor could detect a “pure” Brazilian pepper pixel representing the center of an infestation but not “mixed” Brazilian pepper pixels at the sparsely populated edges. To define the sparse populations, images were classified using a spatial buffer (15- to 100-m radius) based on a low–omissional error image. A 25-m buffer reduced the amount of commissional error for Brazilian pepper in mangrove-dominated forest to 8.2% and buttonwood-dominated forest to 0%. Wider buffers did not significantly improve image accuracy when compared with the 25-m buffer distance. Results indicate that removal crews using hyperspectral images will be able to reliably find the colonies of Brazilian pepper but will not be able to use the images to find isolated scattered trees.

Thirteen field trials were conducted in 1999 and 2000 to evaluate postemergence (POST) weed control with single applications of bromoxynil at 420 or 560 g ai/ha, glufosinate at 291 or 409 g ai/ha, glyphosate at 1,120 g ai/ha, pyrithiobac at 36 or 72 g ai/ha, or sulfosate at 1,120 g ai/ha. Additional treatments evaluated included two applications with glufosinate at both rates in all possible combinations, two applications of glyphosate, and two applications of sulfosate. Weeds were 2 to 5 cm or 8 to 10 cm tall for annual grass and broadleaf weeds whereas yellow nutsedge and glyphosate-resistant corn were 8 to 10 cm tall. All herbicide treatments controlled 2- to 5-cm common cocklebur, Florida beggarweed, jimsonweed, ladysthumb smartweed, Pennsylvania smartweed, pitted morningglory, prickly sida, redroot pigweed, smooth pigweed, and velvetleaf at least 90%. All herbicide treatments except pyrithiobac at either rate controlled 2- to 5-cm common lambsquarters, common ragweed, and tall morningglory at least 90%; pyrithiobac at the lower rate was the only treatment that failed to control entireleaf and ivyleaf morningglory at least 90%. Bromoxynil and pyrithiobac at either rate controlled 2- to 5-cm sicklepod 33 to 68% whereas glufosinate, glyphosate, and sulfostate controlled ≥99%. Glyphosate and sulfosate applied once or twice controlled hemp sesbania less than 70% and volunteer peanut less than 80%. Bromoxynil and pyrithiobac were the least effective treatments for control of annual grass species and bromoxynil controlled Palmer amaranth less than 80%. Glufosinate controlled broadleaf signalgrass, fall panicum, giant foxtail, green foxtail, large crabgrass, yellow foxtail, seedling johnsongrass, Texas panicum, and glyphosate-resistant corn at least 90% but controlled goosegrass less than 60%. Glyphosate and sulfosate controlled all grass species except glyphosate-resistant corn at least 90%. In greenhouse research, goosegrass could be controlled with glufosinate POST plus a late POST-directed treatment of prometryn plus monosodium salt of methylarsonic acid.

Tolerance and yield of ‘H8001 RR’ soybean to single and sequential glyphosate applications made during vegetative and reproductive stages were examined in field trials in 2000 and 2001. In addition, germination and seedling characteristics from harvested seed were assessed. Glyphosate-resistant soybean tolerated single and sequential applications of 1.7 kg ae/ha glyphosate with minimal injury (≤5%), except for an R2 application in 2000 that caused 20% injury. All observed injury was transient and did not adversely affect soybean density, height, seed weight, or seed yield. Germination and seedling growth of harvested seed were similar to those of a nontreated control. These results suggest that glyphosate-resistant soybean can withstand sequential applications of glyphosate during vegetative and reproductive stages without prolonged adverse effects.

Field studies were conducted at the Alabama Agricultural Experiment Station near Shorter, AL, from 1998 to 2000 to evaluate six commercial spray adjuvants and their effects on glyphosate applied to cotton with an air-assisted sprayer. Each adjuvant was evaluated with a conventional sprayer calibrated to deliver 94 L/ha solution and a low-volume, air-assisted sprayer calibrated to deliver 19 L/ha solution. Glyphosate was applied to two-leaf pitted and entireleaf morningglory growing in glyphosate-resistant cotton. Visual control of pitted and entireleaf morningglory was more dependent on the rate of herbicide application than on a particular adjuvant or sprayer, with glyphosate at 0.42 kg ae/ha providing 70% control 21 d after treatment. Pitted and entireleaf morningglory biomass measurements generally reflected visual control data. Ammonium sulfate and formulated glyphosate consistently gave the highest visual control and the greatest biomass reduction. Glyphosate application rate was more important than adjuvant addition or sprayer type, with the higher rates of application providing greater control. No differences in weed control were observed between spray systems; therefore, air-assisted sprayers may be used on a field-scale basis with consistent and adequate results.

When herbicides are applied in mixture, and infestation by weeds is less than expected compared with when herbicides are applied alone, a synergistic effect is said to exist. The inverse response is described as being antagonistic. However, if the expected response is defined as a multiplicative, nonlinear function of the means for the herbicides when applied alone, then standard linear model methodology for tests of hypotheses does not apply directly. Consequently, nonlinear mixed-model methodology was explored using the nonlinear mixed-model procedure (PROC NLMIXED) of SAS System®. Generality of the methodology is illustrated using data from a randomized block design with repeated measures in time. Nonlinear mixed-model estimates and tests of synergistic and antagonistic effects were more sensitive in detecting significance, and PROC NLMIXED was a versatile tool for implementation.