Hostname: page-component-848d4c4894-5nwft Total loading time: 0 Render date: 2024-05-23T16:55:45.885Z Has data issue: false hasContentIssue false
  • English
  • Français

The Al FeBe4 Intermetallic Phase in Beryllium

Published online by Cambridge University Press:  06 March 2019

I. Brower ,
E. C. Roberts  and
T. J. Bosworth
I. Brower
Affiliation:
The Boeing Company, Seattle, Washington 98124
E. C. Roberts
Affiliation:
The Boeing Company, Seattle, Washington 98124
T. J. Bosworth
Affiliation:
The Boeing Company, Seattle, Washington 98124
Get access

Abstract

X-ray diffracfion analysis has been used to determine the nature and relative concentration of the phases present in diffusion welded joints of fairly high purity beryllium. The analyses were done in conjunction with the major objective of the work which was to correlate the types and amounts of phases in the weld joint with the weld processing variables.

The beryllium used contained less than one percent by weight of alloying elements. Those elements present in major amounts were aluminum, less than 0.10 weight percent (less than 0.033 atom percent)and iron, less than 0.15 weight percent (less than 0.023 atom percent).

A phase concentration technique was used to obtain the quantities of phases required for positive identification. X-ray powder patterns obtained from the residues provided detailed diffraction data of which those for the phase Al Fe Be4, are of particular interest. These data are compared with the findings of other research investigations.

Experimental procedures are discussed in detail and a summary of the test results in included.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 17: Twenty-Second Annual Conference on Applications of X-ray Analysis, August 22-24, 1973 , 1973 , pp. 116 - 123
Copyright
Copyright © International Centre for Diffraction Data 1973

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Rooksby, H. P., “Intermet allic Phases in Commercial Beryllium”, Jl. of Nuc. Mat. 7:205, 1962.Google Scholar
2. Carrabine, J. A., “Ternary AI Mn Be4 Phases in Commercially Pure Beryllium”, Jl. of Nuc. Mat. 8:278, 1963.Google Scholar
3. Fraikor, F. J. and Grotzky, V. K., “Grain Boundary Precipitation in Sheet Rolled from Beryllium Ingots”, Trans AIME 239:2008, 1957.Google Scholar
4. Shunk, F. A., “Beryllium-Iron” Constitution of Binary Alloys, Second Supplement, McGraw-Hill Book Company, New York, 1969, p. 160.Google Scholar
5. Misch, L., “Strukturen intermet allischer Verbindungen des Berylliums mit Kupfer, Nickel und Eisen”, Zeitschrift für Physikalische Chemie, B29:42, 1935.Google Scholar
6. Fraikor, F. J. and Brewer, A. W., “Precipitation in Quenched and Aged Beryllium Ingot Sheet”, Trans. ASM 61:784, 1968.Google Scholar
7. Bosworth, T. J., “Diffusion Welding of Beryllium: Part 1-Basic Studies”, The Welding Journal, Welding Research Supplement 57:579s, 1972.Google Scholar
8. Carrabine, J. A. and Paine, R. M. “Aluminum Beryllium Iron”, ASTM Data Card 18–6, 1965.Google Scholar
9. Cuillity, B. D., Elements of X-ray Diffraction, Addison-Wesley Publishing, Reading, Mass. (1956) p. 330.Google Scholar