Hostname: page-component-76fb5796d-9pm4c Total loading time: 0 Render date: 2024-04-26T17:30:48.727Z Has data issue: false hasContentIssue false
  • English
  • Français

XRD Characterization of Titanium/Copper Thin Films Heat Treated in Vacuum and Hydrogen

Published online by Cambridge University Press:  06 March 2019

M. J. Sullivan ,
C. Goldsmith  and
P. Ficalora
M. J. Sullivan
Affiliation:
International Business Machines East Fishkill Facility Hopewell Junction, NY
C. Goldsmith
Affiliation:
International Business Machines East Fishkill Facility Hopewell Junction, NY
P. Ficalora
Affiliation:
Rensselaer Polytechnic Institute Troy, NY
Get access

Extract

Thin film metallization is used on integrated circuit chips and ceramic and/or organic substrates for a number of different purposes, On chips the metallization forms Ohmic and Schottky Barrier Diode contact to the semiconductor and the electrical properties of these contacts are strongly influenced by the metals used. Interaction of the metal and semiconductor during processing can result in major variations in the electrical properties of the contacts, Chip metallization is also employed to provide electrical interconnection between devices on a chip. The interconnections can all be made in a single layer, or for more complex chips, a number of layers might be employed using dielectric layers to separate metal layers and via holes through the dielectric for layer-to-layer interconnection. Chip metallization is also used to form the interconnections between the chips and the substrate carrier.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 33: Thirty-Eighth Annual Conference on Applications of X-ray Analysis, July 31 - August 4, 1989 , 1989 , pp. 177 - 187
Copyright
Copyright © International Centre for Diffraction Data 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Blech, I., Sello, H. and Gregor, L. U. in Handbook of Thin Film Technology, editors: Maissel, L. I. and Glang, R., McGraw-Hill Book Co., New York (1970), Chapter 23.Google Scholar
2. Sze, S. M., Physics of Semiconductor Devices, John Wiley & Sons; New York (1981), 2nd Edition, Chapter 5.Google Scholar
3. Sullivan, M. J., Reith, T. M., Av-Ron, M., Shatzkes, M., J. Appl. Phys. 49 3574 (1978).Google Scholar
4. Reith, T. M. and Sullivan, M. J., Appl. Phys. Lett. 32 177 (1978).Google Scholar
5. Reith, T. M. and Schick, J. D., Appl. Phys, Lett. 25 524 (1974).Google Scholar
6. Sullivan, M. J., Thesis, M. S., Materials Eng. Dept., Syracuse University, Syracuse, NY (1977).Google Scholar
7. Steidel, C. A. in VLSI Technology, editor S. M. Sze, McGraw-Hill Book Co., New York (1983), Chapter 9.Google Scholar
8. Blodgett, A. J., Scientific American, July (1983), Pgs. 86-96.Google Scholar
9. Fraser, D. B. in VLSI Technology, editor S. M. Sze, McGraw-Hill Book Co., New York (1983), Chapter 9.Google Scholar
10. Barry, B. S. and Ames, I., I.B.M. J. Res. and Dev., 13 (1969), pg. 286.Google Scholar
11. Tisone, T. C. and Drobek, J., J. Vac. Sci. Technol. 9 271 (1971).Google Scholar
12. Metcalfe, A. G. in Composite Materials Vol. I, editor: Metcalfe, A. G., Academic Press; New York (1974), Chapter 3.Google Scholar
13. McCline, W. F., editor, Powder Diffraction Inorganic Phases, JCPDS Intl. Center for Diffraction Data, Pa. (1982), File No. 05-0682.Google Scholar
14. McCline, W. F., editor, Powder Diffraction Inorganic Phases, JCPDS Intl. Center for Diffraction Data, Pa. (1982), File No. 04-0836.Google Scholar
15. Ibid, File No. 05-0661.Google Scholar
16. Lyman, T., editor, Metals Handbook Volume I, ASM, Metals Park, Ohio (1961), pg. 48.Google Scholar
17. McCline, W. F., editor Powder Diffraction Inorganic Phases, JCPDS Intl. Center for Diffraction Data, Pa. (1982), File No. 07-0114.Google Scholar
18. Ibid, File No. 20-0371.Google Scholar
19. Ibid, File No. 25-0316.Google Scholar
20. Hanson, M., Constitution of Binary Alloys, McGraw-Hill, New York (1958), pg. 642.Google Scholar
21. McCline, W. F., editor, Powder Diffraction Inorganic Phases, JCPDS Intl. Center for Diffraction Data, Pa. (1982), File Ho. 25-0983.Google Scholar
22. Wagman, D. D., Evans, W. H., Parker, V. B., Schumm, R. H., Halow, I., Barley, S. M., Churney, K. L. and Nuttall, R. C., The NBS Tables of Chemical Thermodynamic Properties, Vol. II, NBS, Washington, D.C. (1982), pg. 209.Google Scholar
23. Massaliki, T. B., editor, Binary Alloy Phase Diagrams, ASM, Metals Park, Ohio (1986).Google Scholar