Hostname: page-component-848d4c4894-4rdrl Total loading time: 0 Render date: 2024-06-15T15:01:51.891Z Has data issue: false hasContentIssue false
  • English
  • Français

Comparison of Predicted and Measured Wall Temperatures in a Turbulent Boundary layer with Arbitrary Pressure Gradients

Published online by Cambridge University Press:  04 July 2016

N. Hay
N. Hay*
Affiliation:
Department of Mechanical Engineering, University of Nottingham
Get access Rights & Permissions [Opens in a new window]

Extract

The problem of the prediction of wall and fluid temperature with a turbulent boundary layer can appear in two forms:

  1. (a) the prediction of wall heat transfer with specified wall temperature;

  2. (b) the prediction of wall and fluid temperature with specified wall heat flux.

Because the differential equations governing heat flow in the turbulent boundary layer are linear, it is sufficient to be able to predict theoretically either the heat transfer rate consequent upon a step function of temperature or the temperature distribution following a step function of wall heat flow rate. Such predictions will then permit the treatment of the more general situations (a) and (b) by superposition.

Type
Technical Notes
Information
The Aeronautical Journal , Volume 73 , Issue 703 , July 1969 , pp. 605 - 606
Copyright
Copyright © Royal Aeronautical Society 1969 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Rubesin, M. W. The Effect of an Arbitrary Surface Temperature Variation along a Flat Plate on the Convective Heat Transfer in an Incompressible Turbulent Boundary Layer. NACA, TN 2345, 1951.Google Scholar
2. Seban, R. Theory Reported in Scessa, S. Experimental Investigation of Convective Heat Transfer to Air from a Flat Plate with Stepwise Discontinuous Surface Temperature. MS Thesis, University of California, Berkeley, 1951.Google Scholar
3. Reynolds, W. C., Kaye, W. M. and Kline, S. J. Heat Transfer in the Turbulent Incompressible Boundary Layer with Arbitrary Wall Temperature and Heat Flux. NASA, Memo 12-3-58, 1958.Google Scholar
4. Spalding, D. B. Heat Transfer to a Turbulent Stream from a Surface with a Stepwise Discontinuity in Wall Temperature. Int Developments in Heat Transfer, ASME, Part II, p 439, 1961.Google Scholar
5. Gardner, G. O. and Kestin, J. Calculation of the Spalding Function over a Range of Prandtl Numbers. Int J Heat Mass Transfer, Vol 6, pp 289–299, 1963.Google Scholar
6. Smith, A. G. and Shah, V. L. The Calculation of Wall and Fluid Temperatures for the Incompressible Turbulent Boundary Layer, with Arbitrary Distribution of Wall Heat Flux. Int J Heat Mass Transfer, Vol 5, pp 1179–1189, 1962.Google Scholar
7. Kilborn, D. F. Heat Transfer through Turbulent Boundary Layers. Hons Thesis, Univ of Nottingham, 1966.Google Scholar
8. Walters, P. T. Heat Transfer from an Aerofoil. Honours Thesis, University of Nottingham, 1965.Google Scholar