Hostname: page-component-848d4c4894-75dct Total loading time: 0 Render date: 2024-05-18T19:30:40.311Z Has data issue: false hasContentIssue false
  • English
  • Français

Linear theory of optimum hot air balloon performance – application to Titan

Published online by Cambridge University Press:  03 February 2016

R. D. Lorenz
R. D. Lorenz*
Affiliation:
Johns Hopkins University, Applied Physics Lab, Laurel, Maryland, USA
Get access Rights & Permissions [Opens in a new window]

Abstract

We develop a simple theory for hot air balloon performance with fixed thermal power and linear heat transfer to the environment, applicable to low-temperature situations such as Titan’s atmosphere. The theory results in a closed-form solution and it is shown that an optimum balloon diameter exists – the maximum payload is achieved when the envelope mass and payload mass are equal. It is also shown simply that the floating mass for a given power has a stronger sensitivity to heat transfer coefficient than to the envelope specific mass. A hot air balloon on Titan with a ~2kW heat source could loft a theoretical maximum payload of ~195kg or ~100kg with appropriate margins.

Type
Technical note
Information
The Aeronautical Journal , Volume 112 , Issue 1132 , June 2008 , pp. 353 - 355
Copyright
Copyright © Royal Aeronautical Society 2008 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Stefan, K., Performance theory for hot air balloons, J Aircr, 1979, 16, (8), pp 539–542.Google Scholar
2. Carlson, L.A. and Horn, W.J., New thermal and trajectory model for high-altitude balloons, J Aircr, 1983, 20, (6), pp 500 – 507.Google Scholar
3. Marion, W.F., Fuel requirements of a hot air balloon, AIAA-81-1934, AIAA 7th Aerodynamic Decelerator and Balloon Technology Conference, San Diego, CA, USA, 21-23 October 1981.Google Scholar
4. Morris, A.L., Scientific ballooning handbook, NCAR Technical Note TN/1A-99, National Center for Atmospheric Research, Boulder, CO, USA. 1975.Google Scholar
5. Lorenz, R.D., Post-Cassini exploration of Titan: Science rationale and mission concepts, J British Interplanetary Society, 2000, 53, pp 218–234.Google Scholar
6. Nott, J., Ballutes :Launching aerobots without compromises, presented at the 4th International Planetary Probe Workshop, Pasadena, CA., August 2006, proceedings in press. Preprint downloaded 17 March 07 from http://www.nott.com/Pages/PLANETS.pdf Google Scholar
7. Lorenz, R.D., A review of balloon concepts for Titan, J British Interplanetary Society, 2008, 61, pp 2–13.Google Scholar
8. Holman, J.P., Heat Transfer, 9th ed. McGraw Hill, New York, USA, 2002.Google Scholar
9. Hall, J.L., Kerzhanovich, V.V., Yavrouian, A.H., Jones, J.A., White, C.V., Dudik, B.A., Plett, G.A., Mennella, J. and Elfes, A., An aerobot for global In situ exploration of Titan, Advances in space research, 2005, 37, pp 2108–2119.Google Scholar
10. Lorenz, R.D., Thermal interaction of the Huygens probe with the Titan environment: Surface windspeed constraint, Icarus, 2006, 182, pp 559–566.Google Scholar
11. Tokano, T. and Lorenz, R.D., Gcm Simulation of balloon trajectories on Titan, Planetary and Space Science, 2006, 54, pp 685–694.Google Scholar
12. Blamont, J., A Method of Exploration of the Atmosphere of Titan, pp 385–395 in Hunten, D.M. and Morrison, D. (Eds) The Saturn System, NASA Conference Publication 2068, 1978.Google Scholar