Hostname: page-component-848d4c4894-2xdlg Total loading time: 0 Render date: 2024-06-21T01:36:16.962Z Has data issue: false hasContentIssue false
  • English
  • Français

A stress intensity factor solution due to holes ahead of growing cracks in thin sheet material

Published online by Cambridge University Press:  04 July 2016

J. B. Young  and
P. N. Campbell
J. B. Young
Affiliation:
College of Aeronautics, Cranfield Institute of Technology
P. N. Campbell
Affiliation:
College of Aeronautics, Cranfield Institute of Technology
Get access Rights & Permissions [Opens in a new window]

Summary

The variation of the Crack Stress Intensity Factor (SIF), for two cracks growing from one hole only in an array of holes in an isotropic material under uni-axial tension has been studied. The effect of the fastener hole ahead of the growing crack was found to give an increase in the SIF only when the crack was within about one and a half diameters of the approached hole edge, compared with the level predicted by considering a single central hole in a plate. An equation suitable for inclusion in a crack growth program has been derived from the research results.

Type
Research Article
Information
The Aeronautical Journal , Volume 90 , Issue 891 , January 1986 , pp. 1 - 5
Copyright
Copyright © Royal Aeronautical Society 1986 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Rooke, D. P. and Cartwright, D. J. Compendium of stress intensity factor. Her Majesty's Stationery Office, 1976.Google Scholar
2. CIT. Handbook of detail design, aircraft design department.Google Scholar
3. Sih, G. C. (ed). Methods of analysis and solutions of crack problems. Noordhoff, 1973.Google Scholar
4. Newman, J. C. Jr. Predicting failure of specimens with either surface cracks or corner cracks at holes. NASA TN D-8244, June 1976.Google Scholar
5. FEA Limited. LUSAS Finite element stress analysis system users manual, 1984.Google Scholar
6. ESDU Limited. Use of linear elastic fracture mechanics in estimating fatigue crack growth rates and residual strength components. ESDU 80036.Google Scholar
7. ESDU Limited. The compounding method of estimating stress intensity factors for cracks in complex configurations using solutions from simple configurations. ESDU 78036.Google Scholar