High-intensity ultrashort laser-induced ablation of stainless steel foil targets in the presence of ambient gas

A. DI BERNARDO; C. COURTOIS; B. CROS; G. MATTHIEUSSENT; D. BATANI; T. DESAI; F. STRATI; G. LUCCHINI

doi:10.1017/S0263034603211125

Abstract

Ablation depths of stainless steel targets irradiated by 80-fs laser pulses at a flux F ≤ 40 J/cm2 (intensity ≤ 5 × 1014 W/cm2) in the presence of air at atmospheric pressure are experimentally measured. These values are lower than the theoretical predictions for metal targets in vacuum. Results are analyzed on the basis of the role of the ambient gas and of crater formation on the behavior of the ablated material.

Crossref Citations

This article has been cited by the following publications. This list is generated based on data provided by Crossref.

FUERBACH, ALEXANDER FERNANDEZ, A. APOLONSKI, A. FUJI, T. and KRAUSZ, F. 2005. Chirped-pulse oscillators for the generation of high-energy femtosecond laser pulses. Laser and Particle Beams, Vol. 23, Issue. 2, p. 113.

Desai, T. Batani, D. Rossetti, S. and Lucchini, G. 2005. Laser-induced ablation and crater formation at high laser flux. Radiation Effects and Defects in Solids, Vol. 160, Issue. 10-12, p. 595.

BUSSOLI, MARCO BATANI, DIMITRI DESAI, TARA CANOVA, FEDERICO MILANI, MARZIALE TRTICA, MILAN GAKOVIC, BILJANA and KROUSKY, EDOUARD 2007. Study of laser induced ablation with focused ion beam/scanning electron microscope devices. Laser and Particle Beams, Vol. 25, Issue. 1, p. 121.

Batani, D. 2008. Functionalized Nanoscale Materials, Devices and Systems. p. 145.

Gakovic, B. Stasic, J. Petrovic, S. Radak, B. Krmpot, A. Jelenkovic, B. and Trtica, M. 2009. Surface Modification of Metallic Targets with Ultrashort Laser Pulses. Acta Physica Polonica A, Vol. 116, Issue. 4, p. 611.

Mirdan, B.M. Jawad, H.A. Batani, D. Conte, V. Desai, T. and Jafer, R. 2009. Surface morphology modifications of human teeth induced by a picosecond Nd:YAG laser operating at 532 nm. Laser and Particle Beams, Vol. 27, Issue. 1, p. 103.

Stasic, J. Gakovic, B. Krmpot, A. Pavlovic, V. Trtica, M. and Jelenkovic, B. 2009. Nickel-based super-alloy Inconel 600 morphological modifications by high repetition rate femtosecond Ti:sapphire laser. Laser and Particle Beams, Vol. 27, Issue. 4, p. 699.

Koresheva, E.R. Aleksandrova, I.V. Koshelev, E.L. Nikitenko, A.I. Timasheva, T.P. Tolokonnikov, S.M. Belolipetskiy, A.A. Kapralov, V.G. Sergeev, V. Yu. Blazevic, A. Weyrich, K. Varentsov, D. Tahir, N.A. Udrea, S. and Hoffmann, D.H.H. 2009. A study on fabrication, manipulation and survival of cryogenic targets required for the experiments at the Facility for Antiproton and Ion Research: FAIR. Laser and Particle Beams, Vol. 27, Issue. 2, p. 255.

Batani, Dimitri 2010. Short-pulse laser ablation of materials at high intensities: Influence of plasma effects. Laser and Particle Beams, Vol. 28, Issue. 2, p. 235.

Momcilovic, M. Limpouch, J. Kmetik, V. Redaelli, R. Savovic, J. Batani, D. Stasic, J. Panjan, P. and Trtica, M. 2012. Surface modification of copper using high intensity, 1015W/cm2, femtosecond laser in vacuum. Applied Surface Science, Vol. 258, Issue. 22, p. 8908.

Shaheen, M.E. Gagnon, J.E. and Fryer, B.J. 2012. Femtosecond (fs) lasers coupled with modern ICP-MS instruments provide new and improved potential for in situ elemental and isotopic analyses in the geosciences. Chemical Geology, Vol. 330-331, Issue. , p. 260.

Shaheen, Mohamed E. and Fryer, Brian J. 2012. Femtosecond laser ablation of brass: A study of surface morphology and ablation rate. Laser and Particle Beams, Vol. 30, Issue. 3, p. 473.

Trtica, M. Batani, D. Redaelli, R. Limpouch, J. Kmetik, V. Ciganovic, J. Stasic, J. Gakovic, B. and Momcilovic, M. 2013. Titanium surface modification using femtosecond laser with 1013–1015 W/cm2 intensity in vacuum. Laser and Particle Beams, Vol. 31, Issue. 1, p. 29.

Döring, S. Richter, S. Heisler, F. Ullsperger, T. Tünnermann, A. and Nolte, S. 2013. Influence of ambient pressure on the hole formation in laser deep drilling. Applied Physics A, Vol. 112, Issue. 3, p. 623.

Batani, Dimitri Vinci, Tommaso and Bleiner, Davide 2014. Laser-ablation and induced nanoparticle synthesis. Laser and Particle Beams, Vol. 32, Issue. 1, p. 1.

Shaheen, M E Gagnon, J E and Fryer, B J 2015. Experimental study on 785 nm femtosecond laser ablation of sapphire in air. Laser Physics Letters, Vol. 12, Issue. 6, p. 066103.

Curcio, A. Anania, M. Bisesto, F.G. Faenov, A. Ferrario, M. Galletti, M. Giulietti, D. Kodama, R. Petrarca, M. Pikuz, T. and Zigler, A. 2016. Characterization of X-ray radiation from solid Sn target irradiated by femtosecond laser pulses in the presence of air plasma sparks. Laser and Particle Beams, Vol. 34, Issue. 3, p. 533.

Saquilayan, Glynnis Mae Q. and Wada, Motoi 2018. Ion propagation in an aluminum hollow cylinder target laser ion source. Japanese Journal of Applied Physics, Vol. 57, Issue. 1S, p. 01AA01.

Article contents

High-intensity ultrashort laser-induced ablation of stainless steel foil targets in the presence of ambient gas

Abstract

Keywords

Access options

This article has been cited by the following publications. This list is generated based on data provided by Crossref.

Article contents

High-intensity ultrashort laser-induced ablation of stainless steel foil targets in the presence of ambient gas

Abstract

Keywords

Access options

Save article to Kindle

Save article to Dropbox

Save article to Google Drive

Reply to: Submit a response

Your details

You have entered the maximum number of contributors

Conflicting interests