An Open Source Software for the Measurement of Deformation Fields by Means of Digital Image Correlation

N. Vanderesse; M. Lagacé; F. Bridier; P. Bocher

doi:10.1017/S1431927613006090

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Extended abstract of a paper presented at Microscopy and Microanalysis 2013 in Indianapolis, Indiana, USA, August 4 – August 8, 2013.

Crossref Citations

This article has been cited by the following publications. This list is generated based on data provided by Crossref.

Perrier, Amélie Touchard, Fabienne Chocinski-Arnault, Laurence and Mellier, David 2016. Mechanical behaviour analysis of the interface in single hemp yarn composites: DIC measurements and FEM calculations. Polymer Testing, Vol. 52, Issue. , p. 1.

Dingreville, Rémi Karnesky, Richard A. Puel, Guillaume and Schmitt, Jean-Hubert 2016. Review of the synergies between computational modeling and experimental characterization of materials across length scales. Journal of Materials Science, Vol. 51, Issue. 3, p. 1178.

Sun, Binhan Vanderesse, Nicolas Fazeli, Fateh Scott, Colin Chen, Jianqiang Bocher, Philippe Jahazi, Mohammad and Yue, Stephen 2017. Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel. Scripta Materialia, Vol. 133, Issue. , p. 9.

Perrier, Amélie Touchard, Fabienne Chocinski-Arnault, Laurence and Mellier, David 2017. Influence of water on damage and mechanical behaviour of single hemp yarn composites. Polymer Testing, Vol. 57, Issue. , p. 17.

Texier, D. Atmani, F. Bocher, P. Nadeau, F. Chen, J. Zedan, Y. Vanderesse, N. and Demers, V. 2018. Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation. International Journal of Fatigue, Vol. 116, Issue. , p. 220.

Vanderesse, N. Richter, A. Nuño, N. and Bocher, P. 2018. Measurement of deformation heterogeneities in additive manufactured lattice materials by Digital Image Correlation: Strain maps analysis and reliability assessment. Journal of the Mechanical Behavior of Biomedical Materials, Vol. 86, Issue. , p. 397.

Sun, Binhan Ma, Yan Vanderesse, Nicolas Varanasi, Rama Srinivas Song, Wenwen Bocher, Philippe Ponge, Dirk and Raabe, Dierk 2019. Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: Role of the austenite-ferrite interface. Acta Materialia, Vol. 178, Issue. , p. 10.

Wankhede, Pankaj and Suresh, Kurra 2020. A review on the evaluation of formability in sheet metal forming. Advances in Materials and Processing Technologies, Vol. 6, Issue. 2, p. 458.

Paterson, Gary W. Macauley, Gavin M. McVitie, Stephen and Togawa, Yoshihiko 2021. Parallel Mode Differential Phase Contrast in Transmission Electron Microscopy, I: Theory and Analysis. Microscopy and Microanalysis, Vol. 27, Issue. 5, p. 1113.

Shahid, Sharlin Andreasson, Eskil Petersson, Viktor Gukhool, Widaad Kang, Yuchi and Kao-Walter, Sharon 2023. Simplified Characterization of Anisotropic Yield Criteria for an Injection-Molded Polymer Material. Polymers, Vol. 15, Issue. 23, p. 4520.

Drouhet, Quentin Touchard, Fabienne Chocinski-Arnault, Laurence and Mellier, David 2023. 3D strain fields in a plant fibre composite during fragmentation test: Micro-CT based DIC and DVC. Composites Part B: Engineering, Vol. 263, Issue. , p. 110860.

Alkhabbat, Mohammed Nadeau, François Mirakhorli, Fatemeh Dao, Thien-My and Pham, Xuan-Tan 2023. Effect of Laser Welding Parameters with Different Fillers on Solidification Cracking and Mechanical Properties of AA7075. Metals, Vol. 13, Issue. 10, p. 1704.

Pot, Clément Yazdani, Majid Boyadjian, Quentin Bocher, Philippe and Béland, Jean-François 2023. Texture and Mechanical Properties of Extruded AA6063 Aluminum Alloy. p. 25.

Texier, Damien Milanese, Julien Jullien, Malo Genée, Julien Passieux, Jean-Charles Bardel, Didier Andrieu, Eric Legros, Marc and Stinville, Jean-Charles 2024. Strain localization in the Alloy 718 Ni-based superalloy: From room temperature to 650 °C. Acta Materialia, Vol. 268, Issue. , p. 119759.

Article contents

An Open Source Software for the Measurement of Deformation Fields by Means of Digital Image Correlation

Abstract

Save article to Kindle

Save article to Dropbox

Save article to Google Drive

Reply to: Submit a response

Your details

You have entered the maximum number of contributors

Conflicting interests