Hostname: page-component-848d4c4894-p2v8j Total loading time: 0.001 Render date: 2024-05-17T15:37:07.084Z Has data issue: false hasContentIssue false

EBIC Measurements of Minority Carrier Diffusion Length in a Gan-based Light Emitting Diode

Published online by Cambridge University Press:  02 July 2020

K.L. Bunker
Affiliation:
Materials Science and Engineering Department and Analytical Instrumentation Facility, North Carolina State University, Box 7531, Raleigh, NC27695-7531
J.C. Gonzalez
Affiliation:
Materials Science and Engineering Department and Analytical Instrumentation Facility, North Carolina State University, Box 7531, Raleigh, NC27695-7531
P.E. Russell
Affiliation:
Materials Science and Engineering Department and Analytical Instrumentation Facility, North Carolina State University, Box 7531, Raleigh, NC27695-7531
Get access

Abstract

This study involved the application of the Scanning Electron Microscope (SEM) for the characterization of a GaN-based Light Emitting Diode (LED) by the Electron Beam Induced Current (EBIC) method. The diffusion length of the minority carriers in both the p and n-type regions of a GaN-based LED structure was determined with the EBIC technique in the line scan configuration. The diffusion length is a critical physical parameter that directly affects the electrical and optical properties of these devices. This value is generally understood to be a material property of the layers within a device. However, the measured values of the diffusion length are sensitive to the sample design, experimental conditions, measurement technique, and data analysis model and method utilized.

The EBIC measurements were performed at room temperature in a Hitachi S-3200N SEM using a GW Electronics Type 31 Specimen Current Amplifier.

Type
Semiconductors
Copyright
Copyright © Microscopy Society of America 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1Donolato, C., Solid State Electronics 25, 1077 (1982).CrossRefGoogle Scholar
2"Electron Beam Testing Technology", Ed. Thong, J. T. L., Plenum Press, N.Y. 1993.CrossRefGoogle Scholar