Hostname: page-component-848d4c4894-nr4z6 Total loading time: 0 Render date: 2024-06-02T10:48:49.325Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrokinetic generation of reactive iron-rich barriers in wet sediments: implications for contaminated land management

Published online by Cambridge University Press:  05 July 2018

D. W. S. Faulkner ,
L. Hopkinson  and
A. B. Cundy
D. W. S. Faulkner*
Affiliation:
Division of Civil Engineering and Geology, University of Brighton, Brighton BN2 4GJ, UK
L. Hopkinson
Affiliation:
Division of Civil Engineering and Geology, University of Brighton, Brighton BN2 4GJ, UK
A. B. Cundy
Affiliation:
Centre for Environmental Research, University of Sussex, Brighton BN1 9QJ, UK
*
*E-mail: d.w.s.faulkner@brighton.ac.uk
Get access Rights & Permissions [Opens in a new window]

Abstract

Here we describe preliminary research into the in situ electrokinetic generation of continuous iron-rich precipitates to act as sub-surface barriers for the containment of contaminated sites. This is achieved using sacrificial iron electrodes emplaced either side of a soil/sediment mass to introduce iron into the system, and their dissolution and re-precipitation under the influence of an applied (DC) electric field. Continuous vertical and horizontal iron-rich bands (up to 2 cm thick) have been generated over a timescale of 300—500 h, at voltages of <5 V with an electrode separation of between 15 and 30 cm. The thickness of the iron-rich band increases as the applied voltage is increased. Geotechnical tests in sand indicate that the iron-rich band produced is practically impervious (coefficient of permeability of 10—9 ms—1 or less), and has significant mechanical strength (unconfined compressive strength of 10.8 N mm—2). By monitoring the current, the integrity of the iron-rich band may be assessed, and by continued application of current, the barrier may 'self heal'. The iron-rich barrier is composed of amorphous iron, goethite, lepidocrocite, maghemite and native iron.

Keywords

electrokineticshorizontal barriersironcontaminated land
Type
Research Article
Information
Mineralogical Magazine , Volume 69 , Issue 5 , October 2005 , pp. 749 - 757
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Acar, Y.B. and Alshawabkeh, A.N. (1993) Principles of electrokinetic remediation. Environmental. Science and Technology, 11, 2638–2647.CrossRefGoogle Scholar
Acar, Y.B., Gale, R.J., Alshawabkeh, A.N., Marks, R.E., Puppala, S., Bricka, M. and Parker, R. (1995) Electrokinetic remediation — basics and technology status. Journal of Hazardous Materials, 40, 117–137.CrossRefGoogle Scholar
Alshawabkeh, A.N., Yeung, A.T. and Bricka, M.R. (1999) Practical aspects of in situ electrokinetic extraction. Journal of Environmental Engineering, 125, 27–3.CrossRefGoogle Scholar
Bendell-Young, L. and Harvey, H.H. (1992) The relative importance of manganese and iron oxides and organic matter in the sorption of trace metals by surficial lake sediments. Geochimica et Cosmochimica Acta, 56, 1175–1186.CrossRefGoogle Scholar
Cairney, T. and Hobson, D.M (1998) In-ground barriers. Pp. 128–139 in: Contaminated Land: Problems and Solutions, 2nd edition. E. and F.N. Spoon, London.CrossRefGoogle Scholar
Casagrande, L. (1947) The application of electro-osmosis to practical problems in foundations and earthwork. Building Research Technical paper no.30, Dept. of Scientific and Industrial Research, HMSO, LondonGoogle Scholar
Casagrande, L. (1952) Electrical stabilisation in earth-work and foundation engineering. Proceedings of the M.I.T. conference on soil stabilisation 1952. Pp. 26–36 in: Methods of Treatment of Unstable Ground (Bell, F.G., editor), Newnes Butterworths, London 1975Google Scholar
Cundy, A. and Hopkinson, L. (2005) Electrokinetic iron pan generation in unconsolidated sediments: implications for contaminated land remediation and soil engineering. Applied Geochemistry, 20, 841–848.CrossRefGoogle Scholar
Franklin, J.A. and Brook, N. (1985) Method for determining point load strength index — International Society for Rock Mechanics Commission on testing methods (Revision of the Point Load Test method). International Journal of Rock Mechanics and Mining Science, 22, 51—60.CrossRefGoogle Scholar
Head, K.H. (1982) Manual of Soil Laboratory Testing. Volume 2, Pentech Press, Plymouth, UK, pp. 450–455.Google Scholar
Helland, B.R., Alvarez, P.J.J. and Schnoor, J.L. (1994) Reductive dechlorination of carbon tetrachloride with elemental iron. Journal of Hazardous Materials, 41, 205–216.CrossRefGoogle Scholar
Hopkinson, L. and Cundy, A. (2003) FIRS (ferric iron remediation and stabilisation): a novel electrokinetic technique for soil remediation and engineering: CLAIRE research bulletin RB2, May edition.Google Scholar
Ingles, O.G. and Metcalf, J.B. (1972) Soil Stabilization - Principles and Practice. Butterworths, London.Google Scholar
Jacob, K.H., Dietrich, S. and Krug, H.J. (1994) Self organised mineral fabrics. Pp. 259–268 in: Fractals and Dynamic Systems in Geoscience (Kruhl, J.H., editor). Springer Verlag, Berlin.CrossRefGoogle Scholar
Johnson, T.L., Fish, W., Gorby, Y. and Tratneyek, P. (1998) Degradation of carbon tetrachloride by iron metal: Complexation effects on the oxide surface. Journal of Contaminant Hydrology, 29, 379–398.CrossRefGoogle Scholar
Kovalick, W.W. (1995) In Situ Remediation Technology: Electro-kinetics. US Environmental Protection Agency, Office of Solid Waste and Emergency Response Technology Innovation Office, Washington.Google Scholar
Lamont-Black, J. (2001) EKG: The next generation of geosynthetics. Ground Engineering, 34, 22—23.Google Scholar
Masliyah, J.H. (1994) Electrokinetic Transport Phenomena. Aostra Technical Publications Series no. 12, Alberta Oil Sands Technology and Research Authority, Edmonton, Canada.Google Scholar
McGuire, M.M. (2003) Applications of surface analysis in the environmental sciences: dehalogenation of chlorocarbons with zero-valent iron and iron-containing mineral surfaces. Analytica Chimica Acta 496 301–313.CrossRefGoogle Scholar
Mulligan, C.N., Yong, R.N., and Gibbs, B.F. (2001) Remediation technologies for metal-contaminated soils and groundwater: an evaluation. Engineering Geology, 60, 193–207.CrossRefGoogle Scholar
Probstein, R.F. and Hicks, R.E. (1993) Removal of contaminants from soils by electric fields. Science, 260, 498–503.CrossRefGoogle ScholarPubMed
Reddy, K.R. and Chinthamreddy, S. (1999) Electrokinetic remediation of heavy metal-contaminated soils under reducing environments. Waste Management, 19 269–282.CrossRefGoogle Scholar
Terzaghi, K. and Peck, R.B. (1967) Soil Mechanics in Engineering Practice, 2nd edition. John Wiley, New YorkGoogle Scholar
Van Cauwenberghe, L. (1997) Electrokinetics: Technology overview report: Groundwater Remediation. Technologies Analysis Centre, Pittsburgh, PA, USA.Google Scholar
Virkutyte, J., Sillanpaa, M. and Latostenmaa, P. (2001) Electrokinetic soil remediation – a critical overview. Science of the Total Environment, 289, 97–121.CrossRefGoogle Scholar