Hostname: page-component-76fb5796d-45l2p Total loading time: 0 Render date: 2024-04-26T08:40:03.777Z Has data issue: false hasContentIssue false
  • English
  • Français

Scintillator Light Emission Enhancement via Nanostructure and Plasmonic Design

Published online by Cambridge University Press:  09 April 2017

M. Brooke Beckert ,
Jonathan Andreasen ,
Keri Ledford ,
Greg Mohler ,
Clayton Kerce  and
Jason H. Nadler
M. Brooke Beckert*
Affiliation:
Advanced Concepts Laboratory, Georgia Tech Research Institute 925 Dalney Street Atlanta, GA 30332, U.S.A.
Jonathan Andreasen
Affiliation:
Advanced Concepts Laboratory, Georgia Tech Research Institute 925 Dalney Street Atlanta, GA 30332, U.S.A.
Keri Ledford
Affiliation:
Advanced Concepts Laboratory, Georgia Tech Research Institute 925 Dalney Street Atlanta, GA 30332, U.S.A.
Greg Mohler
Affiliation:
Advanced Concepts Laboratory, Georgia Tech Research Institute 925 Dalney Street Atlanta, GA 30332, U.S.A.
Clayton Kerce
Affiliation:
Advanced Concepts Laboratory, Georgia Tech Research Institute 925 Dalney Street Atlanta, GA 30332, U.S.A.
Jason H. Nadler
Affiliation:
Advanced Concepts Laboratory, Georgia Tech Research Institute 925 Dalney Street Atlanta, GA 30332, U.S.A.
*
*(Email: brooke.beckert@gtri.gatech.edu)
Get access

Abstract

Recent work in the development of glass-ceramic scintillators at the Georgia Tech Research Institute (GTRI) has focused on modifying formulation of the oxide host glass and scintillating crystal phase, secondary heat treatment (ceramization) schedule, and processing improvement to ensure optical quality. These efforts have yielded considerable performance improvements to glass-ceramic scintillators, and have made them among the most promising composite scintillators under investigation. However, these materials still fall short of current commercially-available single crystal scintillators, and so new avenues must be pursued for continued improvements. The present investigation uses predictive simulations to inform the materials selection and process design for high refractive index layers to improve light extraction from the scintillator, and increased light output via bulk or surface plasmon interactions.

Keywords

ceramicluminescenceoptical properties
Type
Articles
Information
MRS Advances , Volume 2 , Issue 42: Electronics, Magnetics and Photonics , 2017 , pp. 2295 - 2301
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Barta, M. B. et al., “Composition optimization of scintillating rare-earth nanocrystals in oxide glass-ceramics for radiation spectroscopy,” Appl. Opt., vol. 53, no. 16, pp. D21–8, Jun. 2014.Google Scholar
Kang, Z., Barta, M. B., Nadler, J. H., Rosson, R., Wagner, B. K., and Kahn, B., “GdBr3:Ce in Glass Wafer as Nuclear Radiation Monitor,” Heal. Phys. Soc. J., vol. 104, no. 5, pp. 504–510, 2013.Google Scholar
Beckert, M. B., Gallego, S., Ding, Y., Elder, E., and Nadler, J. H., “Medical imaging scintillators from glass-ceramics using mixed rare-earth halides,” Opt. Mater. (Amst)., vol. 60, pp. 513–520, 2016.CrossRefGoogle Scholar
Beckert, M. B., Gallego, S., Elder, E., and Nadler, J., “Transitioning glass-ceramic scintillators for diagnostic x-ray imaging from the laboratory to commercial scale,” Proc. SPIE, vol. 9969, p. 99690B, 2016.Google Scholar
Pignalosa, P., Liu, B., Chen, H., Smith, H., and Yi, Y., “Giant light extraction enhancement of medical imaging scintillation materials using biologically inspired integrated nanostructures,” Opt. Lett., vol. 37, no. 14, p. 2808, 2012.Google Scholar
Piasecki, P. et al., “Plasmon enhanced luminescence of Tb3+ doped Li2O - LaF3-Al2O3-SiO2 glass containing Ag nanoparticles,” Proc. SPIE, vol. 7757, p. 77572M-77572M-7, 2010.Google Scholar