Hostname: page-component-76fb5796d-vfjqv Total loading time: 0 Render date: 2024-04-29T01:08:34.595Z Has data issue: false hasContentIssue false

Applications of Diamond Thin Films in Electrochemistry

Published online by Cambridge University Press:  29 November 2013

Get access

Extract

Electrochemical reactions typically involve electron transfer between an electrode and a dissolved chemical species at a solid-electrode/liquid-electrolyte interface. Three broad classes of electrochemical applications may be identified: (1) synthesis (or destruction), in which an applied potential is used to bring about a desired chemical oxidation or reduction reaction; (2) analysis, in which the current/potential characteristics of an electrode are used to determine the type and concentration of a species; and (3) power generation. These broad types of applications require stable, conductive, chemically robust, and economical electrodes. Diamond electrodes, fabricated by chemical vapor deposition, provide electrochemists with an entirely new type of carbon electrode that meets these requirements for a wide range of applications.

The first reports of electrochemical studies using diamond were in the mid-1980s. During the past several years, the field has attracted increasing attention. This review summarizes the electrochemical properties of diamond that make it a unique electrode material and that distinguish it from conventional carbon electrodes.

Type
Diamond Films: Recent Developments
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Iwaki, M., Sato, S., Takahashi, K., and Sakairi, H., Nucl. Instrum. Methods 209 (1983) p. 1129.CrossRefGoogle Scholar
2.Pleskov, Yu. V., Sakharova, A.Ya., Krotova, M.D., Bouilov, L.L., and Spitsyn, B.V., J. Electroanal. Chem. 228 (1987) p. 19.CrossRefGoogle Scholar
3.Natishan, P.M. and Morrish, A., Mater. Lett. 8 (1989) p. 269.CrossRefGoogle Scholar
4.Patel, K., Hashimoto, K., and Fujishima, A., Denki Kagaku 60 (1992) p. 659.CrossRefGoogle Scholar
5.Sakharova, A., Sevast'yanov, A.E., Pleskov, Y., Templitskaya, G.L., Surikov, V.V., and Voloshin, A.A., Electrokhimiya [Russian J. Electrochem.] 27 (1991) p. 239.Google Scholar
6.Sakharova, A., Nyikos, L., and Pleskov, Y., Electrochimiya Acta 37 (1992) p. 973.CrossRefGoogle Scholar
7.Swain, G.M. and Ramesham, R., Anal. Chem. 65 (1993) p. 345.CrossRefGoogle Scholar
8.Tenne, R., Patel, K., Hashimoto, K., and Fujishima, A., J. Electnmnal. Chem. 344 (1993) p. 409.CrossRefGoogle Scholar
9.Pleskov, Yu.V., Sakharova, A.Ya., Kasatkin, E.V., and Shepelin, V.A., J. Electnmnal. Chem. p. 401.Google Scholar
10.Zhang, X., Wang, R., Yao, Y., Chen, C., Zhu, J., Liu, X., Wu, J., and Zhang, G., in 2nd Int. Conf. on the Applications of Diamond Films and Related Materials, edited by Yoshikawa, M., Murakawa, M., Tzeng, Y., and Yarbrough, W.A. (MYU, Tokyo, 1993) p. 65.Google Scholar
11.Swain, G.M., Adv. Mater. 6 (1994) p. 388.CrossRefGoogle Scholar
12.Swain, G.M., J. Electrochem. Soc. 141 (1994) p. 3382.CrossRefGoogle Scholar
13.Miller, B., Kalish, R., Feldman, L.C., Katz, A., Moriya, N., Short, K., and White, A.E., J. Electrochem. Soc. p. L41.Google Scholar
14.Awada, M., Strojek, J.W., and Swain, G.M., J. Electrochem. Soc. 142 (1995) p. L42.CrossRefGoogle Scholar
15.Alehashem, S., Chambers, F., Strojek, J.W., Swain, G.M., and Ramesham, R., Anal. Chem. 67 (1995) p. 2812.CrossRefGoogle Scholar
16.Reuben, C., Galun, E., Cohen, H., Tenne, R., Kalish, R., Muraki, Y., Hashimoto, K., Fujishima, A., Butler, J.M., and Levy-Clement, C.J., J. Electroanal. Chem. 396 (1995) p. 233.CrossRefGoogle Scholar
17.Sakharova, A.Ya., Pleskov, Yu.V., Di Quarto, F., Piazza, S., Sunseri, C., Teremetskaya, I.G., and Varnin, V.P., J. Electrochem. Soc. 142 (1995) p. 2704.CrossRefGoogle Scholar
18.Pleskov, Yu.V., Mishuk, V., Abaturov, M.A., Elkin, V.V., Krotova, M.D., Varnin, V.P., and Teremetskaya, I.G., J. Electroanal. Chem. 396 (1995) p. 227.CrossRefGoogle Scholar
19.Peilio, Z., Jianzhong, Z., Shonzhong, Z., Xikang, Z., and Guoxiong, Z., Fresenius J. Anal. Chem. 353 (1995) p. 171.CrossRefGoogle Scholar
20.Bouamrane, F., Tadjeddine, A., Butler, J.E., Tenne, R., and Levy-Clement, C., J. Electroanal. Chem. 405 (1996) p. 95.CrossRefGoogle Scholar
21.Pleskov, Yu.V., Elkin, V.V., Abaturov, M.A., Krotova, M. D., Mishuk, V.Ya., Varnin, V.P., and Teremetskaya, I.G., J. Electroanal. Chem. 413 (1996) p. 105.CrossRefGoogle Scholar
22.Strojek, J.W., Granger, M.C., Swain, G.M., Dallas, T., and Holtz, M.W., Anal. Chem. 68 (1996) p. 2031.CrossRefGoogle Scholar
23.DeClements, R., Hirsche, B.L., Granger, M.C., Xu, J., and Swain, G.M., J. Electrochem. Soc. 143 (1996) p. L150.CrossRefGoogle Scholar
24.DeClements, R., Swain, G.M., Dallas, T., Holtz, M.W., Herrick, R. III, and Stickney, J.L., Langmuir 12 (1996) p. 6578.CrossRefGoogle Scholar
25.Martin, H.B., Argoitia, A., Landau, U., Anderson, A.B., and Angus, J.C., J. Electrochem. Soc. 143 (1996) p. L133.CrossRefGoogle Scholar
26.Pleskov, Yu.V., Sakharova, A.Ya., Churikov, A.V., Varnin, V.P., and Teremetskaya, I.G., Elektrokhimiya [Russian J. Electrochem.] 32 (1996) p. 1164Google Scholar
27.Wu, J., Zhu, J., Shan, L., and Cheng, N., Anal. Chim. Acta 333 (1996) p. 125.CrossRefGoogle Scholar
28.Jiali, W., Jianzhong, Z., Guoxiong, Z., Xinru, L., and Nianyi, C., Anal. Chim. Acta 327 (1996) p. 133.CrossRefGoogle Scholar
29.Vinokur, N., Miller, B., Avyigal, Y., and Kalish, R., J. Electrochem. Soc. 143 (1996) p. L238.CrossRefGoogle Scholar
30.DeClements, R. and Swain, G.M., J. Electrochem. Soc. 144 (1997) p. 856.CrossRefGoogle Scholar
31.Chen, Q., Granger, M.C., Lister, T.E., and Swain, G.M., J. Electrochem. Soc.. p. 3086.Google Scholar
32.Jolley, S., Koppang, M., Jackson, T., and Swain, G.M., Anal. Chem. 69 (1997) p. 4041.CrossRefGoogle Scholar
33.Xu, J., Granger, M.C., Chen, Q., Lister, T.E., Strojek, J.W., and Swain, G.M., Anal. Chem. p. 591 A.Google Scholar
34.Modestov, A.D., Pleskov, Yu.V., Varnin, V.P., and Teremetskaya, I.G., Elektrokhimiya [Russian J. Electrochem.] 33 (1997) p. 60.Google Scholar
35.Boonma, L., Yano, T., Tryk, D.A., Hashimoto, K., and Fujishima, A., J. Electrochem. Soc. 144 (1997) p. L142.CrossRefGoogle Scholar
36.Li, L-F., Totir, D., Miller, B., Chottiner, G., Argoitia, A., Angus, J.C., and Scherson, D.A., J. Am. Chem. Soc. 119 (1997) p. 7875.CrossRefGoogle Scholar
37.Ramesham, R. and Rose, M.F., Diam. Rel. Mater. 6 (1997) p. 17.CrossRefGoogle Scholar
38.Ramesham, R. and Rose, M.F., Diamond Films Tech. 7 (1997) p. 1.Google Scholar
39.Ramesham, R. and Rose, M.F., J. Mater. Sci. Lett. 16 (1997) p. 799.CrossRefGoogle Scholar
40.Katsuki, N., Wakita, S., Nishiki, Y., Shimamune, T., Akiba, Y., and Iida, M., Jpn. J. Appl. Phys. Lett. 36 (1997) p. L260.CrossRefGoogle Scholar
41.van de Langemaat, J., Cao, G. Z., Janssen, G., Vanmaekelbergh, D., and Kelly, J.J., in Proc. Electrochemical Society, vol. 95–21 (The Electrochemical Society, Pennington, NJ, 1995) p. 103.Google Scholar
42.Vinokur, N., Miller, B., Avyigal, Y., and Kalish, R., in Proc. 5th Int. Symp. Diamond Materials, edited by Davidson, J., Brown, W.D., Gicquel, A., Spitsyn, B.V., and Angus, J.C. (The Electrochemical Society, Pennington, NJ, 1997) p. 267.Google Scholar
43.Carey, J. (private communication); J. Carey, C.S. Christ, Jr., and S.N. Lowery, U.S. Patent No. 5,399,247 (March 21,1995).Google Scholar
44.Cooper, J.B., Pang, S., Albin, S., Zheng, J., and Johnson, R.M., Anal. Chem. 70 (1998) p. 464.CrossRefGoogle Scholar
45.Xu, J. and Swain, G.M., Anal. Chem. p. 1502.Google Scholar
46.Evstefeeva, Yu.E., Pleskov, Yu.V., Varnin, V.P., and Teremetskaya, I.G., Elektrokhimiya [Russian J. Electrochem] 34 (1998) p. 234.Google Scholar
47.Collins, A.T., Philos. Trans. R. Soc. London 342 (1993) p. 233.Google Scholar
48.Narducci, D., Guarnieri, C.R., and Cuomo, J.J., J. Electrochem. Soc. 138 (1991) p. 2446.CrossRefGoogle Scholar
49.Tsai, Y.F., Ananthanarayanan, K.P., Gielisse, P.J., and Mitra, S.S., J. Appl. Phys. 43 (1972) p. 3677.CrossRefGoogle Scholar
50.Mort, J., Okumura, K., and Machonkin, M.A., Philos. Mag. B63 (1991) p. 1031.CrossRefGoogle Scholar
51.Nishimura, K., Das, K., and Glass, J.T., J. Appl. Phys. 69 (1991) p. 3142.CrossRefGoogle Scholar
52.Koizumi, S., Ozaki, H., Kamo, M., Sato, Y., and Inuzuka, T., Appl. Phys. Lett. 71 (1997) p. 1064.CrossRefGoogle Scholar
53.Koizumi, S., Kamo, M., Sakaguchi, I., Sato, Y., Mita, S., Sawabe, A., Reznik, A., Uzan-Saguy, C., and Kalish, R., in 5th National Institute for Research in Inorganic Materials Int. Symp. on Advanced Materials (ISAM 98) (Tsukuba, Japan, March 1-5, 1998).Google Scholar
54.Angus, J.C., Thin Solid Films 142 (1980) p. 145.CrossRefGoogle Scholar
55.Angus, J.C., Argoitia, A., Gat, R., Li, Z., Sunkara, M., and Wang, L., Philos. Trans. R. Soc. London 342 (1993) p. 195.Google Scholar
56.Butler, J.E. and Woodin, R.L., Philos. Trans. R. Soc. London p. 209.Google Scholar
57.Angus, J.C., Wang, Y., and Sunkara, M., Annu. Rev. Mater. Sci. 21 (1991) p. 221.CrossRefGoogle Scholar
58.Argoitia, A., Martin, H.B., Angus, J.C., and Landau, U., in Proc. 5th Int. Symp. on Diamond Materials, edited by Davidson, J., Brown, W.D., Gicquel, A., Spitsyn, B.V., and Angus, J.C., (The Electrochemical Society, Pennington, NJ) p. 364.Google Scholar
59.Lettington, A. and Steeds, J.W., eds., Thin Film Diamond (Chapman & Hall, London, 1994).CrossRefGoogle Scholar
60.Prelas, M.A., Popovici, G., and Bigelow, L.K., eds., Handbook of Industrial Diamond and Diamond Films (Marcel Dekker, New York, 1998).Google Scholar
61.Davies, G., ed., Properties and Growth of Diamond (INSPEC Datareview Series, The Institute of Electrical Engineers, London, 1994).Google Scholar
62.Pan, L.S. and Kania, D.R., eds., Diamond: Electronic Properties and Applications (Kluwer Academic Publishers, Boston, 1995).CrossRefGoogle Scholar
63.Paoletti, A. and Tucciarone, A., eds., “The Physics of Diamond” in Proc. Enrico Fermi International School of Physics, Course CXXXV (IOS Press, Amsterdam, 1997).Google Scholar
64.Xu, J. and Swain, G.M. (unpublished).Google Scholar
65.Bard, A.J., Memming, R., and Miller, B., PureAppl. Chem. 63 (1991) p. 569.CrossRefGoogle Scholar
66.Bockris, J.O'M. and Khan, S.U.M., Surface Electrochemistry: A Molecular Approach (Plenum Press, New York, 1993).CrossRefGoogle Scholar
67.Robertson, J. and Rutter, M.J., Diamond Rel. Mater. 7 (1998) p. 620.CrossRefGoogle Scholar
68.Newman, J., Electrochemical Systems (Prentice Hall, Englewood Cliffs, NJ, 1991).Google Scholar
69.Landstrass, M.I. and Ravi, K.V., Appl. Phys. Lett. 55 (1989) p. 1391.CrossRefGoogle Scholar
70.Looi, H.J., Pang, L.Y.S., Molloy, A.B., Jones, F., Foord, J.S., and Jackman, R.B., Diamond Rel. Mater. 7 (1998) p. 550.CrossRefGoogle Scholar
71.Mehandru, S.P., Anderson, A.B., and Angus, J.C., J. Mater. Res. 7 (1992) p. 689.CrossRefGoogle Scholar
72.Mehandru, S.P. and Anderson, A.B., J. Mater. Res. 9 (1994) p. 383.CrossRefGoogle Scholar
73.Allers, L. and Mainwood, A., Diamond Rel. Mater. 7 (1998) p. 261.CrossRefGoogle Scholar
74.Janssen, G., van Enckevort, W.J.P., Vollenberg, W., and Giling, L.J., Diamond Rel. Mater. 1 (1992) p. 789.CrossRefGoogle Scholar
75.Fan, F.F., Shea, T.V., and Bard, A.J., J. Electrochem. Soc. 131 (1984) p. 828.CrossRefGoogle Scholar
76.Bard, A.J., Bocarsly, A.B., Fan, F.F., Walton, E.G., and Wrighton, M.S., J. Am. Chem. Soc. 102 (1980) p. 3671.CrossRefGoogle Scholar
77.Koval, C.A. and Howard, J.N., Chem. Rev. 92 (1992) p. 411.CrossRefGoogle Scholar