Hostname: page-component-848d4c4894-ndmmz Total loading time: 0 Render date: 2024-06-12T19:29:01.287Z Has data issue: false hasContentIssue false
  • English
  • Français

Micromorphology and Macromorphology of Recycled Fiber and Wood*

Published online by Cambridge University Press:  29 November 2013

Douglas D. Stokke
Get access

Extract

The versatility of wood as a raw material is emphasized by the realization that the mass of wood consumed annually in the United States is nearly that of the combined total U.S. consumption of aluminum, plastics, cement, and steel (Figure 1). Partly as a result of the enormous quantities consumed, many wood and paper products also make up significant fractions of the materials disposed in landfills, despite accelerated recycling efforts, notably those of the paper industry. With a target recycle rate of 40% by 1995, the paper industry will make further progress in alleviating some of the disposal problems, but additional efforts to recycle wood and wood-fiber-based materials into other types of products will also be needed. Many of these opportunities have been described. A common denominator in these utilization schemes is to consider how the morphology of secondary wood-based materials may limit their use, and how the morphological characteristics of recycled fiber and wood may influence the properties of the materials produced from them. These considerations suggest, at least partly, a materials science approach to the utilization of recycled fiber and wood, particularly for the fabrication of wood-based composites.

Type
Reprocessing Paper and Wood-Based Materials
Information
MRS Bulletin , Volume 19 , Issue 2 , February 1994 , pp. 22 - 29
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

This article is a modification of an article published in Materials Research Society Symposium Proceedings Vol. 266, (1992) p. 47.

References

1.Ulrich, A.H., Misc. Pub. No. 1486 (U.S. Dept. Agric, For. Serv., Washington, DC, 1990).Google Scholar
2.Bowyer, J.L., personal communication, (University of Minnesota, St. Paul, 1992).Google Scholar
3.U.S. Congress, Office of Technology Assessment, OTA-0-424 (U.S. Government Printing Office, Washington, DC, 1989).Google Scholar
3a.Materials Interactions Relevant to Recycling of Wood-Based Materials, edited by Rowell, R.M., Laufenberg, T.L., Rowell, J.K. (Mater. Res. Soc. Symp. Proc. 266, Pittsburgh, PA, 1992).Google Scholar
4.Rowell, R.M., in Materials Interactions Relevant to the Pulp, Paper, and Wood Industries, edited by Caulfield, D.F., Passaretti, J.D., and Sobczynski, S.F. (Mater. Res. Soc. Symp. Proc. 197, Pittsburgh, PA, 1990) p. 3.Google Scholar
5.Marra, G.A., in Proceedings, IXth Int'l Symp. on For. Sci., Natl. Acad. Sci., Seoul, Korea, August 31–September 6, 1981 (Natl. Acad. Sci., 1982) p. 57.Google Scholar
6.Hse, C-Y., Koch, P., McMillin, C.W., and Price, E.W., For. Prod. J. 25 (1975) p. 42.Google Scholar
7.Kelley, M.W., Gen. Tech. Rept. FPL-10 (U.S. Dept. Agric, For. Serv., Forest Products Laboratory, Madison, WI, 1977).Google Scholar
8.Suchsland, O. and Woodson, G.E., Agric. Handbk. No. 640 (U.S. Dept. Agric., For. Serv., 1986).Google Scholar
9.Marra, G.G., For. Prod. J. 22 (1972) p. 43.Google Scholar
10.McCurdy, D.R. and Phelps, J.E., For. Prod. J. 42 (1992) p. 25.Google Scholar
11.McCurdy, D.R., Ewers, J.T., and Kung, F.H., A Study of Lumber Use in Pallets Manufactured in the United States 1982 and 1985 (Dept. of For. and School of Agric., Southern Illinois University, Carbondale, IL, 1986).Google Scholar
12.Panshin, A.J. and deZeeuw, C., Textbook of Wood Technology, 4th ed. (McGraw-Hill, New York, 1980).Google Scholar
13.Côte, W.A., in Concise Encyclopedia of Wood and Wood-Based Materials, edited by Schniewind, A.P. (MIT Press, Cambridge, MA, 1989) p. 319.Google Scholar
14.Obst, J.R., in Reference 4, p. 11.Google Scholar
15.Atalla, R.A., in Reference 4, p. 89.Google Scholar
16.Garcia, D.A., Pulp & Paper 64 (1990) p. S1.Google Scholar
17.Klungness, J.H. and Spelter, H.N., personal communication (U.S. Forest Products Laboratory, Madison, WI, 1992).Google Scholar
18.Glomb, J.W. and Mulligan, D.D., in Concise Encyclopedia of Wood and Wood-Based Materials, edited by Schniewind, A.P., (MIT Press, Cambridge, MA, 1989) p. 207.Google Scholar
19.Adhesive Bonding of Wood and Other Structural Materials, edited by Blomquist, R.F., Christiansen, A.W., Gillespie, R.H., and Myers, G.E., Educational Modules for Materials Science and Engineering (Materials Research Lab., Pennsylvania State University, University Park, PA, 1982) p. 422.Google Scholar
20.Geimer, R.L., Mahoney, R.J., Loehnertz, S.P., and Meyer, R.W., Res. Pap. FPL 463 (U.S. Dept. Agric, For. Serv., Forest Products Laboratory, Madison, WI, 1985).Google Scholar
21.Stokke, D.D. and Liang, B-H., in Proceedings of the Adhesives and Bonded Wood Products Symposium, Seattle, WA, November 19-21, 1991 (For. Prod. Res. Soc, Madison, WI, in press).Google Scholar
22.Stokke, D.D., Shaler, S.M., Mercado, J., Wang, X., and Peek, D.N., in Wood Adhesives 1990, edited by Conner, A.H., Christiansen, A.W., Myers, G.E., River, B.H., Vick, C.B., and Spelter, H.N., Proceedings of the Wood Adhesives 1990 Symposium, Madison, WI, May 16-18, 1990 (For. Prod. Res. Soc, Madison, WI, 1991) p. 112.Google Scholar
22a. In Reference 3a, Chapters 10 and 12.Google Scholar
23.Hatala, R.G., Stokke, D.D., Shaler, S.M., Wang, X., and Mercado, J. in Wood Fiber/Polymer Composites: Fundamental Concepts, Processes, and Material Options, edited by Wolcott, M.P. (For. Prod. Soc., Madison, WI, 1993) p. 89.Google Scholar
24.Mercado, J.S., MS thesis, Michigan Technological University, 1992.Google Scholar
25.Koran, Z., Wood and Fiber 2 (1970) p. 247.Google Scholar
26.Myers, G.C., For. Prod. J. 37 (1987) p. 30.Google Scholar
27.Rowell, R.M., in The Chemistry of Solid Wood, edited by Rowell, R.M. (Advances in Chemistry Series 207, American Chemical Society, Washington, DC, 1984) p. 184.CrossRefGoogle Scholar
28.Spalt, H.A., in Stabilization of the Wood Cell Wall, edited by Suchsland, O. (Wood Science Seminar 1, Department of Forestry, Michigan State University, East Lansing, MI, 1988) p. 49.Google Scholar