Hostname: page-component-848d4c4894-5nwft Total loading time: 0 Render date: 2024-04-30T10:13:45.011Z Has data issue: false hasContentIssue false

The Nucleation and Propagation of Misfit Dislocations aear the Critical Thickness in Ge-Si Strained Epilayers

Published online by Cambridge University Press:  26 February 2011

E. P. Kvam
Affiliation:
Department of Materials Science and Engineering, University of Liverpool, Liverpool L693BX, UK
D. J. Eaglesham
Affiliation:
Department of Materials Science and Engineering, University of Liverpool, Liverpool L693BX, UK
D. M. Maher
Affiliation:
Department of Materials Science and Engineering, University of Liverpool, Liverpool L693BX, UK AT&T Bell Laboratories, Murray Hill, NJ 07974, USA
C. J. Humphreys
Affiliation:
Department of Materials Science and Engineering, University of Liverpool, Liverpool L693BX, UK
J. C. Bean
Affiliation:
Department of Materials Science and Engineering, University of Liverpool, Liverpool L693BX, UK
G. S. Green
Affiliation:
Department of Physics, University of Durham, Durham DH1 3HP, UK
B. K. Tanner
Affiliation:
Department of Physics, University of Durham, Durham DH1 3HP, UK
Get access

Abstract

The nucleation and propagation of misfit dislocations in Ge-Si strained epilayers on (100) Si have been investigated using transmission electron microscopy and X-ray diffraction topography at low lattice parameter mismatch (˜ 0.8%). Misfit dislocations nucleate as half loops which are predominantly unfaulted (> 90%) at the advancing growth interface. Under the driving force of the epilayer strain, unfaulted half loops glide and expand on inclined { 111 }planes toward the heterointerface (i.e. substrate/epilayer interface). These unfaulted half loops consist of a 60°-dislocation segment which lies along < 011> in a plane parallel to the heterointerface (i.e. (100)) and this segment is connected to the growth interface by two screw dislocation segments which both lie on the same inclined {111} glide plane. As 60° dislocations reach the heterointerface on each of the four inclined {111} variants, they form an orthogonal array of misfit dislocations which lie along [011] and [011]. At higher lattice parameter mismatch (˜ 2%), there appear to be some important changes in the dislocation behavior and these changes result in orthogonal arrays of heterointerface dislocations which are predominantly edge type (i.e. 90°dislocations).

Type
Research Article
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.van der Merwe, J. H., J. Appl. Phys. 34, 123 (1963).Google Scholar
2.Matthews, J. W., Blakeslee, A. E., and Mader, S., Thin Solid Films 33, 253 (1976).Google Scholar
3.People, R., IEEE J. Quant. Electron. QE–22, 1696 (1986).Google Scholar
4.Bean, J. C., Feldman, L. C., Fiory, A. T., Nakahara, S. and Robinson, I. J., J. Vac. Sci. Tech. A 2, 436 (1984).Google Scholar
5.People, R. and Bean, J. C., Appl. Phys. Lett. 47, 322 (1985).Google Scholar
6.Fritz, I. J., Appl. Phys. Lett. 51, 1080 (1987).Google Scholar
7.Hull, D. and Bacon, D. J., Introduction to Dislocations (Pergamon Press, Oxford, 1984).Google Scholar
8.Rajan, K. and Denhoff, M., J. Appl. Phys. 62, 1710 (1987).Google Scholar
9.Hagen, W. and Strunk, H., Appl. Phys. 17, 85 (1978).Google Scholar
10.Kvam, E. P., Eaglesham, D. J., Humphreys, C. J., Maher, D. M., Bean, J. C. and Fraser, H. L., in Microscopy of Semiconducting Materials 1987, edited by Cullis, A. G. and Augustus, P. D. (IOP Publishing Ltd, Bristol, 1987) Inst. Phys. Conf. Ser. 87, p. 165.Google Scholar