Hostname: page-component-848d4c4894-4hhp2 Total loading time: 0 Render date: 2024-05-13T12:31:27.842Z Has data issue: false hasContentIssue false
  • English
  • Français

Cadmium Sulphide Thin Films Grown By Atomic Layer Epitaxy

Published online by Cambridge University Press:  16 February 2011

Aimo Rautiainen ,
Yrjö Koskinen ,
Jarmo Skarp  and
Sven Lindfors
Aimo Rautiainen
Affiliation:
Microchemistry Ltd., Box 45, SF-02151 Espoo, Finland
Yrjö Koskinen
Affiliation:
Microchemistry Ltd., Box 45, SF-02151 Espoo, Finland
Jarmo Skarp
Affiliation:
Microchemistry Ltd., Box 45, SF-02151 Espoo, Finland
Sven Lindfors
Affiliation:
Microchemistry Ltd., Box 45, SF-02151 Espoo, Finland
Get access

Abstract

Polycrystalline cadmium sulphide (CdS) thin films were grown by Atomic Layer Epitaxy (ALE) using indium tin oxide and tin oxide coated glass substrates. Some of the experiments were made using elemental reactants, and others with inorganic compounds as reactants. Films were characterized using various techniques such as XRD, SEM and optical transmission spectroscopy. Growth rate of CdS films was observed to be 1/4 - 1/3 monolayer per cycle with elemental reactants. A full monolayer/cycle coverage was obtained when using CdCl2 and H2S as reactants. The crystalline structure of the CdS films wis β-cubic (111) when using elemental reactants. The mixed structure was observed when inorganic compounds were used as reactants. Only the hexagonal phase was observed, when substrate surface was pretreated before CdS deposition.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 222: Symposium D – Atomic Layer Growth and Processing , 1991 , 263
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hill, R. and Meakin, J.D., Current Topics in Photovoltaics, Academic Press, London, 1985, p. 223.Google Scholar
2. Deshmukh, L.P., Palwe, A.B. and Sawant, V.S., Solar Energy Mater., 20, 341 (1990).Google Scholar
3. Fulop, G.F. and Taylor, R.M., Ann. Rev. Mater. Sci., 15, 197 (1985).Google Scholar
4. Perrier, G., Philippe, P. and Dodelet, J.P., J. Mater. Res. 3, 1031 (1988).Google Scholar
5. Krunks, M., Mellikov, E. and Sark, E., Thin Solid Films 145, 105 (1986).Google Scholar
6. Sovio, M. Lo and Oliveri, M.E., Appl. Phys., A 50, 17 (1990).Google Scholar
7. Akkad, F. El and Naby, M. Abdel, Solar Energy Mater. 18, 151 (1989).Google Scholar
8. Suntola, T., Acta Polytech. Scand., Chem. Technol. Metall. Ser., No. 195, Helsinki, 1990, p. 93 (Proc. of 1st Intl. Symp. on Atomic Layer Epitaxy).Google Scholar
9. Suntola, T., Materials Science Reports 4, 261 (1989).Google Scholar
10. Skarp, J., Koskinen, Y., Lindfors, S., Rautiainen, A. and Suntola, T., Proc. of 10th European Photovoltaic Solar Energy Conference, 8–12 April, 1991, Lisbon, Portugal (in press).Google Scholar
11. Pakkanen, T.A., Nevalainen, V., Lindblad, M. and Makkonen, P., Surface Science 188, 456 (1987).Google Scholar
12. Joint Committee on Powder Diffraction Standards 1971, 6–0314 (CdS,greenockite) and 10–454 (CdS,hawleyite).Google Scholar