Hostname: page-component-76fb5796d-skm99 Total loading time: 0 Render date: 2024-04-27T15:01:02.283Z Has data issue: false hasContentIssue false

Characterization of Transparent and Conductive ZnO:Ga Thin Films Produced by Rf Sputtering at Room Temperature

Published online by Cambridge University Press:  01 February 2011

E. Fortunato
Affiliation:
Materials Science Department/CENIMAT, Faculty of Sciences and Technology of New University of Lisbon, Campus da Caparica, 2829-516 Caparica, Portugal.
V. Assunçāo
Affiliation:
Materials Science Department/CENIMAT, Faculty of Sciences and Technology of New University of Lisbon, Campus da Caparica, 2829-516 Caparica, Portugal.
A. Marques
Affiliation:
Materials Science Department/CENIMAT, Faculty of Sciences and Technology of New University of Lisbon, Campus da Caparica, 2829-516 Caparica, Portugal.
I. Ferreira
Affiliation:
Materials Science Department/CENIMAT, Faculty of Sciences and Technology of New University of Lisbon, Campus da Caparica, 2829-516 Caparica, Portugal.
H. Águas
Affiliation:
Materials Science Department/CENIMAT, Faculty of Sciences and Technology of New University of Lisbon, Campus da Caparica, 2829-516 Caparica, Portugal.
L. Pereira
Affiliation:
Materials Science Department/CENIMAT, Faculty of Sciences and Technology of New University of Lisbon, Campus da Caparica, 2829-516 Caparica, Portugal.
R. Martins
Affiliation:
Materials Science Department/CENIMAT, Faculty of Sciences and Technology of New University of Lisbon, Campus da Caparica, 2829-516 Caparica, Portugal.
Get access

Abstract

Gallium-doped zinc oxide films were prepared by rf magnetron sputtering at room temperature as a function of the substrate-target distance. The best results were obtained for a distance of 10 cm, where a resistivity as low as 2.7×10-4 Ωcm, a Hall mobility of 18 cm2/Vs and a carrier concentration of 1.3×1021 cm-3 were achieved. The films are polycrystalline presenting a strong crystallographic c-axis orientation (002) perpendicular to the substrate. The films present an overall transmittance in the visible part of the spectra of about 85 %, in average. The low resistivity, accomplished with a high growth rate deposited at RT, enables the deposition of these films onto polymeric substrates for flexible applications.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hartnagel, H.L., Dawar, A.L., Jain, A.K., Jagadish, C., ‘Semiconducting Transparent Thin Films’ (Institute of Physics Publ., 1995) pp.110126.Google Scholar
2. Gordon, R.G., MRS Bulletin 25, 52 (2000).Google Scholar
3. Suzuki, A., Matsushita, T., Aoki, T., Yoneyama, Y., Okuda, M., Jpn. J. Appl. Phys. 38 (1999) L71–L73.Google Scholar
4. Reddy, K.T.R., Reddy, T.B.S., Forbes, I., Miles, R.W., Surf. Coat. Technol. 151-152, 110 (2002).Google Scholar
5. Kashiwaba, Y., Sugawara, K., Haga, K., Watanabe, H., Zhang, B.P., Segawa, Y., Thin Solid Films 411, 87 (2002).Google Scholar
6. Sang, B., Kushiya, K., Okumura, D., Yamase, O., Solar Energy Materials and Solar Cells 67, 237 (2001).Google Scholar
7. Hirasawa, H., Yoshida, M., Nakamura, S., Suzuki, Y., Okada, S., Kondo, K., Solar Energy Materials and Solar Cells 67, 231 (2001).Google Scholar
8. Wang, R., King, L.H., Sleight, A.W., J. Mat. Res. 11, 1659 (1996).Google Scholar
9. Coutts, T.J., Young, D.L., Li, X., MRS Bull. 25, 58 (2000).Google Scholar