Hostname: page-component-76dd75c94c-7vt9j Total loading time: 0 Render date: 2024-04-30T07:21:31.979Z Has data issue: false hasContentIssue false
  • English
  • Français

Deflection-Toughened Corundum-Rutile Composites

Published online by Cambridge University Press:  25 February 2011

Saburo Hori ,
Hisatsugu Kaji ,
Masahiro Yoshimura  and
Shigeyuki Sōmiya
Saburo Hori
Affiliation:
Kuraha Chemical Industry Co., Ltd., 16 Ochiai, Nishikimachi, Iwaki-Shi, Fukushima 974, Japan
Hisatsugu Kaji
Affiliation:
Kuraha Chemical Industry Co., Ltd., 16 Ochiai, Nishikimachi, Iwaki-Shi, Fukushima 974, Japan
Masahiro Yoshimura
Affiliation:
Research Laboratory of Engineering Materials, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-Ku, Yokohama 227, Japan
Shigeyuki Sōmiya
Affiliation:
Research Laboratory of Engineering Materials, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-Ku, Yokohama 227, Japan
Get access

Abstract

Dense corundum-rutile composites containing plate-shaped corundum particles were prepared from the CVD Al2O3-TiO2 powders by adding a small amount of sodium and sintering below ˜1280°C. The fracture toughness increased up to 6.5 Mpa · ✓m and the increment of toughness was proportional to the volume % of plate-shaped corundum particles. The importance of tilt deflection and crack bowing rather than the twist deflection was suggested in this system.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 78: Symposium E – Advances in Structural Ceramics , 1986 , 283
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Garvie, R.C., Hannink, R.H. and Pascoe, R.T., Nature (London) 258, 703 (1975).Google Scholar
2. Evans, A.G., in Advances in Ceramics 12, edited by Claussen, N., Rühle, M. and Heuer, A.H. (The American Ceramic Society, Columbus, OH, 1984) pp. 193–212.Google Scholar
3. Faber, K.T. and Evans, A.G., Acta Metall. 31, 565 (1983).Google Scholar
4. Hamano, K., Taikabutsu (Refractories) 27, 520 (1975).Google Scholar
5. Okamura, H., Barringer, E.A. and Bowen, H.K., J. Am. Ceram. Soc. 69, C22 (1986).Google Scholar
6. Hori, S., Ishii, Y., Yoshimura, M. and Sōmiya, S., Yogyo-Kyokai-Shi 94, 400 (1986).Google Scholar
7. Hori, S., Kurita, R., Yoshimura, M. and Sōmiya, S., Int. J. High Tech. Ceram. 1, 59 (1985).Google Scholar
8. Hori, S., Yoshimura, M. and Sōmiya, S., in Defect Properties and Processing of High-Technology Nonmetallic Materials, edited by Chan, Y., Kingery, W.D. and Stokes, R.J. (Materials Research Society, Pittsburgh, 1986), pp. 87–94.Google Scholar
9. Niihara, K., Bull. Ceram. Soc. Japan 20, 12 (1985).Google Scholar
10. Fullman, R.L., Trans. AIME 197, 447 (1953).Google Scholar