Hostname: page-component-848d4c4894-xm8r8 Total loading time: 0 Render date: 2024-06-20T16:22:53.855Z Has data issue: false hasContentIssue false
  • English
  • Français

Development Of Fe3Si Alloys

Published online by Cambridge University Press:  26 February 2011

Lou Langhong ,
Zhang Tianxiang  and
Zhu Yaoxiao
Lou Langhong
Affiliation:
Institute of Metal Research, Academa Sinica, Shenyang 110015, China
Zhang Tianxiang
Affiliation:
Institute of Metal Research, Academa Sinica, Shenyang 110015, China
Zhu Yaoxiao
Affiliation:
Institute of Metal Research, Academa Sinica, Shenyang 110015, China
Get access

Abstract

The partial phase diagram of the Fe-Mn-Si system at 900°C was obtained by electron microprobe measurement. In addition, the effect of carbon on these equilibrium were also studied. Depending on these, a series of Fe-Mn-Si-C alloys with the matrix of Fe3Si were designed. It was found that they all have some plasticity and can satisfy the engineering requirement. Moreover, after appropriate heat treatment, all these alloys have good corrosion resistance in sulphuric acid with various concentrations.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 213: Symposium Q – High-Temperature Ordered Intermetallic Alloys IV , 1990 , 833
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Uhlig, H.H., Corrosion and Corrosion Control, 2nd ed., 1971, John Wiley, p374.Google Scholar
2. Rostoker, W. and M-H Ge., M. J.Materials for Energy System, 5, 181 (1984)CrossRefGoogle Scholar
3. Gupta, K.P., Trans. AIME, 230, 253 (1964)Google Scholar
4. Ishida, K., Shikuya, K., Nishizawa, T., J.Japan Institute of Metals, 32, 1035 (1973)Google Scholar
5. Oh, J.M. and McNallan, M.J., Corrosion, 43, 561 (1987)Google Scholar
6. Saldanha, B.J., Streicher, M.A., Materials Performance, January 1986, p37–43Google Scholar
7. Oh, J.M. and McNallan, M.J., J. Electrochemical Society, 133, 1042 (1986)CrossRefGoogle Scholar
8. Alekins, A. and Gardner, J.W., Corros. Sci., 21, 49 (1981).Google Scholar