Hostname: page-component-848d4c4894-p2v8j Total loading time: 0.001 Render date: 2024-06-05T08:19:45.449Z Has data issue: false hasContentIssue false
  • English
  • Français

High-Temperature Oxidation Behavior of Nb3Al Based Alloys

Published online by Cambridge University Press:  01 January 1992

Tetsuo Fujiwara ,
Ken Yasuda  and
Hideyo Kodama
Tetsuo Fujiwara
Affiliation:
Hitachi Research Laboratory, Hitachi, Ltd., 3-1-1 Saiwaicho Hitachi-shi 317, Japan
Ken Yasuda
Affiliation:
Hitachi Research Laboratory, Hitachi, Ltd., 3-1-1 Saiwaicho Hitachi-shi 317, Japan
Hideyo Kodama
Affiliation:
Hitachi Research Laboratory, Hitachi, Ltd., 3-1-1 Saiwaicho Hitachi-shi 317, Japan
Get access

Abstract

Oxidation behavior of Nb3Al has been studied in the temperature range from room temperature to 1500°C. It was revealed in this study that the oxide scale that formed at elevated temperatures was not protective against the propagation of the oxidation front. The products of oxidized Nb3Al alloys melted below 1500 °C, even though the melting point of Nb3Al is 1960°C.

We expected that the addition of third elements would improve oxidation resistance because atomic sizes smaller than Nb and Al might reduce the solubility and diffusivity of oxygen in the alloy. The elements V, Mn, Fe, Mo, Ta, W and Re were added as the third element for the examination of oxidation resistance. The oxidation resistance tests were carried out by measuring weight gain during temperature elevation and during isothermal heating in air. It was concluded that the addition of Re or Mo improved the oxidation resistance for Nb3Al alloys.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 959
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCE

1. Fujiwara, T., Yasuda, K., Kodama, H. and Suwa, M., in Proceedings of International Symposium on Intermetallic Compounds (JIMIS-6) edited by Izumi, O. (JIM, Sendai, Japan, 1991), p. 633.Google Scholar
2. Svedberg, R. C., in Properties of High Temperature Alloys, edited by Forroulis, Z. A. and Pettit, F . S. (Electrochem. Soc., Pennington, NJ, 1976), p. 331.Google Scholar
3. Meier, G. H., in Oxidation of Hieh-Temperature Intermetallics. edited by Grobstein, T. and Doychak, J. (TMS, Warrendale, PA, 1988), p. 16.Google Scholar
4. Massalski, T. B., in Binary Alloy Phase Diagrams, ASM, 139 (1986).Google Scholar