Hostname: page-component-848d4c4894-4hhp2 Total loading time: 0 Render date: 2024-05-16T04:18:26.107Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of Particle Size of Mo Solid Solution on Hardness of Mo5SiB2/Mo-Based Alloys

Published online by Cambridge University Press:  21 September 2018

Kyosuke Yoshimi ,
Yusuke Kondo  and
Kouichi Maruyama
Kyosuke Yoshimi
Affiliation:
Graduate School of Environmental Studies, Tohoku University, Sendai, Miyagi 980-8579, Japan
Yusuke Kondo
Affiliation:
Graduate School of Environmental Studies, Tohoku University, Sendai, Miyagi 980-8579, Japan
Kouichi Maruyama
Affiliation:
Graduate School of Environmental Studies, Tohoku University, Sendai, Miyagi 980-8579, Japan
Get access

Abstract

Three kinds of Mo-Si-B ternary alloys and a 1 at.% Al added Mo-Si-B alloy with the compositions near Mo-8.7 at.% Si-17.4 at.% B that is in the Mo5SiB2 and Mo two-phase compositional region were produced by Ar arc-melting followed by the heat treatment at 1800 °C for 24 h. These alloys have the characteristic fine microstructure composed of small Mo solid solution (Moss) particles in the Mo5SiB2 (T2) matrix with the primary phase (Moss or T2 depending on composition). The volume fraction of the Moss particles ranges from 25.5 to 30.5 % and its average size from 3.0 to 6.4 μm in the fine microstructure of the alloys. Micro cracks were introduced by Vickers hardness tests into the microstructures, and their propagation is disturbed by the small Moss particles. Thus, each hardness value seems to relate to the cracking behavior around each indent. On the other hand, Vickers hardness values do not show correlation with the volume fraction of the Moss particles, but clearly decrease with increasing the average particle size of Moss. Therefore, it should be concluded that the increase in the particle size of Moss could enhance the toughness of the Mo5SiB2/Mo-based alloys effectively by ductile phase toughening.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1128: Symposium U – Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications , 2008 , 1128-U07-08
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Nunes, C.A., Sakidja, R. and Perepezko, J.H.: Structural Intermetallics 1997, 831 (1997).Google Scholar
2. Ito, K., Ihara, K., Tanaka, K., Fujikura, M. and Yamaguchi, M.: Intermetallics, 9, 591 (2001).Google Scholar
3. Mitra, R.: Int. Mater. Rev., 51, 13 (2006).Google Scholar
4. Yoshimi, K., Nakatani, S., Nomura, N. and Hanada, S.: Intermetallics, 11, 787 (2003).Google Scholar
5. Ihara, K., Ito, K., Tanaka, K. and Yamaguchi, M.: Mater. Sci. Eng. A, A329 – 331, 222 (2002).Google Scholar
6. Testing methods for fracture toughness of fine ceramics, JIS-R-1607, 6 (1995).Google Scholar
7. Kinzoku Data Book 3rd Edition, ed. by JIM, Maruzen, 31 (1993).Google Scholar
8. Schneibel, J.H., Kramer, M.J., Unal, O. and Wright, R.N.: Intermetallics, 11, 787 (2003).Google Scholar