Hostname: page-component-848d4c4894-x24gv Total loading time: 0 Render date: 2024-06-08T12:20:24.366Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Fluoride and Chloride Ions on Corrosion of Titanium Grade 7 in Concentrated Groundwaters

Published online by Cambridge University Press:  21 March 2011

A. L. Pulvirenti ,
K. M. Needham ,
M. A. Adel-Hadadi  and
A. Barkatt
A. L. Pulvirenti
Affiliation:
The Catholic University of America, Washington DC, 20064 C. Marks and J. Gorman, Dominion Engineering, Inc. 6862 Elm Street Suite 460, MacLean, VA, 22101
K. M. Needham
Affiliation:
The Catholic University of America, Washington DC, 20064 C. Marks and J. Gorman, Dominion Engineering, Inc. 6862 Elm Street Suite 460, MacLean, VA, 22101
M. A. Adel-Hadadi
Affiliation:
The Catholic University of America, Washington DC, 20064 C. Marks and J. Gorman, Dominion Engineering, Inc. 6862 Elm Street Suite 460, MacLean, VA, 22101
A. Barkatt
Affiliation:
The Catholic University of America, Washington DC, 20064 C. Marks and J. Gorman, Dominion Engineering, Inc. 6862 Elm Street Suite 460, MacLean, VA, 22101
Get access

Abstract

Titanium Grade 7 (Ti-7) was tested for both general and local corrosion in environments consisting of fluoride and chloride salts added to simulated groundwaters. Tests were conducted on both U-bends and disks in order to determine the extent of corrosion under stressed and unstressed conditions. The experiments were run over a broad range of temperatures and pH values for periods of up to 164 days. It was found that Ti-7 is susceptible to intergranular attack in some of the test solutions at moderately elevated temperatures, leading to conspicuous localized corrosion. Pitting was detected within 14 days, with pit depths on the order of 0.1 mm. Surface defects appeared to promote the initiation of pitting. The same environment caused stress corrosion cracking failure in a statically stressed U-bend.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 713: Symposium JJ – Scientific Basis for Nuclear Waste Management XXV , 2002 , JJ1.9
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.“Yucca Mountain Preliminary Site Suitability Evaluation,” U.S. Department of Energy office of Civilian Radioactive Waste Management, DOE/RW –0540, July 2001.Google Scholar
2. Pourbaix, M., Atlas of Electrochemical Equilibria in Aqueous Solutions, (NACE, Houston, TX, 1974) p 217–218.Google Scholar
3. Schutz, R.W., Mater. Perform., 24(1), (1985), p39–47.Google Scholar
4. Schutz, R.W. and Thomas, D.E., ASM Metals Handbook, 9th Edition, 13, (ASM International, Materials Park, Ohio, 1987) p 669–706.Google Scholar
5. Roy, A. K., TRW Environmental Safety Systems Report TDR-EBS-MD-000015rev 00, December 2000.Google Scholar
6. Gordon, G., presented to CLST Appendix 7 Meeting, Lawrence Livermore National Laboratory, July 7–8, 1999.Google Scholar
7. Gdowski, G.E. and Ahluwalia, H.S., “Degradation Mode Survey of Titanium – Base Alloys,” Lawrence Livermore National Laboratory, Jan 30, 1995.Google Scholar
8. Brossia, C.S. and Cragnolino, G.A., Corrosion/2000 Paper 211, (NACE, Houston, TX) 2001.Google Scholar
9. Wronkowitz, D.J., Journal of Nuclear Materials 238, (1996), p 78–95.Google Scholar
10. Rosenberg, N.D., Gdowski, G.E., Knauss, K.G., Applied Geochemistry, 16, (2001), 1231–1240.Google Scholar
11. McKay, P. and Mitton, D.B., Corrosion, 41(1), January (1985), p 52–62.Google Scholar
12. Donachie, M.J., Titanium; A Technical Guide, (ASM International, Materials Park, Ohio, 1988).Google Scholar
13. Covington, L.C., STP 576, ASTM, (1976), p 147–154.Google Scholar
14. Whitbeck, M., Glassley, W., Lawrence Livermore National Laboratory Report UCRL-ID-129906, February 1998.Google Scholar